A group of earthquakes typically consists of a mainshock followed by multiple aftershocks. Exploration of the dynamic behaviors of soil subjected to sequential earthquake loading is crucial. In this paper, a series of cyclic simple shear tests were performed on the undisturbed soft clay under different cyclic stress amplitudes and reconsolidation degrees. The equivalent seismic shear stress was calculated based on the seismic intensity and soil buried depth. Furthermore, reconsolidation was conducted at the loading interval to investigate the influence of seismic history. An empirical model for predicting the variation of the accumulative dissipated energy with the number of cycles was established. The energy dissipation principle was employed to investigate the evolution of cyclic shear strain and equivalent pore pressure. The findings suggested that as the cyclic stress amplitude increased, incremental damage caused by the aftershock loading to the soil skeleton structure became more severe. This was manifested as the progressive increase in deformation and the rapid accumulation of dissipated energy. Concurrently, the reconsolidation process reduced the extent of the energy dissipation by inhibiting misalignment and slippage among soil particles, thereby enhancing the resistance of the soft clay to subsequent dynamic loading.

Forests are increasingly impacted by climate change, affecting tree growth and carbon sequestration. Tree-ring width, closely related to tree growth, is a key climate proxy, yet models describing ring width or growth often lack comprehensive environmental data. This study assesses ERA5-Land data for tree-ring width prediction compared to automatic weather station observations, emphasizing the value of extended and global climate data. We analyzed 723 site-averaged and detrended tree-ring chronologies from two broadleaved and two gymnosperm species across Europe, integrating them with ERA5-Land climate data, CO2 concentration, and a drought index (SPEI12). A subset was compared with weather station data. For modelling interannual variations of tree-ring width we used linear models to assess parameter importance. ERA5-Land and weather-station-based models performed similarly, maintaining stable correlations and consistent errors. Models based on meteorological data from weather stations highlighted SPEI12, sunshine duration, and temperature extremes, while ERA5-Land models emphasized SPEI12, dew-point temperature (humidity), and total precipitation. CO2 positively influenced the growth of gymnosperm species. ERA5-Land facilitated broader spatial analysis and incorporated additional factors like evaporation, snow cover, and soil moisture. Monthly assessments revealed the importance of parameters for each species. Our findings confirm that ERA5-Land is a reliable alternative for modeling tree growth, offering new insights into climate-vegetation interactions. The ready availability of underutilized parameters, such as air humidity, soil moisture and temperature, and runoff, enables their inclusion in future growth models. Using ERA5-Land can therefore deepen our understanding of forest responses to diverse environmental drivers on a global scale.

In recent years, there has been an increased focus on the research of earthen construction, driven by the rising demand for low-cost and sustainable building materials. Numerous studies have investigated the properties of compressed earth blocks (CEBs), however, very few have examined the properties of earth-based mortar. Mortar is an essential component and further investigation is required to enhance the mechanical performance of CEB structures. The study focuses on raw earth mortar (REM), which is a rudimentary mix of water with natural earth consisting of sand, silt and clay. Through experimental investigation, the fresh and hardened properties of three REM mixes were examined to determine the influence of cement stabilisation and jute fibre reinforcement. Shear triplet CEB assemblages were manufactured and tested to determine the initial shear strength of each mortar mix. The addition of 20 mm jute fibre at 0.25 % by weight increased the compressive and flexural strength of cement-stabilised raw earth mortar by 12 % and 20 % respectively. The addition of jute fibre also enhanced the initial shear strength, angle of internal friction and coefficient of friction during shear triplet testing. Finite element analysis (FEA) was undertaken to model the failure mechanism of the CEB assemblages, employing the use of cohesive zone modelling. The results of the FEA provided a satisfactory correspondence to the behaviour observed during experimental analysis and were within +/- 5.0 % of the expected values. The outcome of this investigation demonstrates the potential of REM and contributes to the development of low-cost and sustainable earth construction.

The environmental prevalence of the tire wear-derived emerging pollutant N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone (6PPD-Q) has increasingly raised public concern. However, knowledge of the adverse effects of 6PPD-Q on soil fauna is scarce. In this study, we elucidated its impact on soil fauna, specifically on the earthworm Eisenia fetida. Our investigation encompassed phenotypic, multi-omics, and microbiota analyses to assess earthworm responses to a gradient of 6PPD-Q contamination (10, 100, 1000, and 5000 mu g/kg dw soil). Post-28-day exposure, 6PPD-Q was found to bioaccumulate in earthworms, triggering reactive oxygen species production and consequent oxidative damage to coelomic and intestinal tissues. Transcriptomic and metabolomic profiling revealed several physiological perturbations, including inflammation, immune dysfunction, metabolic imbalances, and genetic toxicity. Moreover, 6PPD-Q perturbed the intestinal microbiota, with high dosages significantly suppressing microbial functions linked to metabolism and information processing (P < 0.05). These alterations were accompanied by increased mortality and weight loss in the earthworms. Specifically, at an environmental concentration of 6PPD-Q (1000 mu g/kg), we observed a substantial reduction in survival rate and physiological disruptions. This study provides important insights into the environmental hazards of 6PPD-Q to soil biota and reveals the underlying toxicological mechanisms, underscoring the need for further research to mitigate its ecological footprint.

It is generally believed that loess is not prone to liquefaction. However, on December 18, 2023, a magnitude 6.2 earthquake occurred in Gansu Province, China (35.70 degrees N, 102.79 degrees E), triggering a large-scale loess liquefactioninduced flow slide spanning 2.5 km, approximately 10 km from the epicenter. To understand the disastercausing mechanism, this study obtained the physical and mechanical properties of loess in the source area through field surveys and laboratory tests, and characterized the liquefaction behavior of saturated loess layers. The findings indicate that the strong ground motion, saturated loess, and gentle slope collectively contribute to the prevailing dynamic, geological, and topographic conditions. The saturated loess layer primarily comprises silt particles with particle sizes less than 0.075 mm accounting for approximately 92.2 % of its composition. The saturated loess layer at a depth of 11m was liquefied under the action of seismic waves with a peak ground acceleration of 0.40 g, however, due to the unique pore structure of loess, it is observed that pore pressure development rate lags behind strain rise rate during liquefaction process. The majority of strain accumulation occurred during a distinct post-peak stabilization phase following peak seismic activity while pore pressure continues to escalate even after vibration ceases. The results provide scientific insights into understanding the cause contributing to loess liquefaction induced-flow slide disasters due to earthquake.

On February 6, 2023, two devastating seismic events, the Kahramanmaras, earthquakes, struck the Eastern Anatolian Fault Line (EAF) at 9-h intervals. The first earthquake, with a moment magnitude (Mw) of 7.7, struck the Pazarc & imath;k district, followed by a second earthquake with a moment magnitude (Mw) of 7.6 in the Elbistan district, both within the Kahramanmaras, province. These dual earthquakes directly impacted eleven provinces in Eastern and Southeastern Anatolia leading to significant loss of life and extensive damage to property and infrastructure. This study focuses on revealing the main parameters causing to the collapse of reinforced concrete (RC) buildings by examining their compliance with legislation and earthquake codes in force at the time of construction. For this purpose, detailed examinations such as field observations, collection of general information and official documents about the buildings, determination of material properties and soil characteristics, and three-dimensional finite element (FE) analysis of 400 totally collapsed RC buildings in the Kahramanmaras,, Ad & imath;yaman, Hatay, and Gaziantep provinces, which were among the cities affected by the Kahramanmaras, earthquakes were performed. The findings of this study contribute to a better understanding of the seismic deficiencies of buildings in earthquake-prone regions and provide information on which strategies to develop to increase the resilience of buildings with similar characteristics in other earthquake regions against future seismic events. Considering that the time from the beginning of the construction of the building until its completion consists of several stages, it can be seen that 43.58 % of the errors that cause damage and collapse of the buildings in this study are made in the construction stage, 25.57 % in the FE analysis stage, 24.77 % in the license stage, and 6.07 % in the after construction stage. Thanks to the development process of earthquake codes, regulations in building inspection practices and easier access to quality materials have greatly reduced the damage and collapse of buildings constructed in recent years.

This study investigates the effects of incorporating date palm wood powder (DPWP) on the thermal, physical, and mechanical properties of lightweight fired earth bricks made from clay and dune sand. DPWP was added in varying proportions (0 %, 5 %, 8 %, 10 %, 12 %, and 15 % by weight of the soil matrix) to evaluate its influence on brick performance, particularly in terms of thermal insulation. Experimental results revealed that adding DPWP significantly reduced the thermal conductivity of the bricks, achieving a maximum reduction of 56.41 %. However, the inclusion of DPWP negatively impacted the physical and mechanical properties of the samples. Among the tested bricks, those with 8 % and 10 % DPWP achieved a desirable balance, maintaining satisfactory mechanical strength within acceptable standards while achieving thermal conductivity values of 0.333 and 0.279 W/m & sdot;K, representing reductions of 37.29 % and 47.46 %, respectively. To further validate these findings, prototypes of the DPWP-enhanced fired bricks and commercial bricks were constructed and tested under real environmental conditions during both summer and winter seasons, over a continuous 12-h daily period. The DPWP-enhanced prototypes demonstrated superior thermal performance, with temperature differences reaching up to 3 degrees C compared to the commercial bricks. These findings highlight the potential of DPWP as a sustainable additive for improving the thermal insulation properties of fired earth bricks, thereby promoting eco-friendly and energy-efficient building materials for sustainable construction practices.

The lack of global standardization in the testing methods for Stabilized Rammed Earth (SRE) hinders progress in advancing knowledge of this sustainable construction technique. This review compiles research from the last four years on SRE, focusing on manufacturing parameters, curing conditions, chemical stabilizer kinds, stabilizer dosage, testing methods, and mechanical and durability properties. Based on this analysis, a methodology is proposed to define and standardize SRE manufacturing parameters, curing, and testing conditions. The proposed methodology suggests that soil particle size distribution should be optimized to enhance mechanical strength and durability while reducing stabilizer dosage. The selection and dosage of stabilizers should be determined based on soil characteristics and environmental considerations. The standard proctor test is recommended for assessing manufacturing conditions, while curing should be performed by wrapping samples in plastic at laboratory temperature. Unconfined Compressive Strength is identified as the most relevant mechanical test and should be conducted at 7, 28, and 90 days. For durability assessment, erosion testing and exposure to liquid water are recommended at 28 days. This methodology represents one of the first steps toward the standardization of SRE testing methods, which must be accepted and adopted by researchers and practitioners. By implementing this methodology, comparable results across studies could be achieved, facilitating further research and collaboration among researchers. Such efforts would contribute to enhancing the available knowledge to improve the material's performance and further promote SRE as a sustainable construction technique.

This study investigates salt weathering in the indoor, humid environment of China's Jinsha earthen site. Methods such as digital microscope, scanning electron microscopy (SEM), ion chromatography (IC), energy dispersive spectroscopy (EDS), and laser particle size analysis were employed to collect and analyze samples from four heavily weathered walls. The sampling approach took into account differences in depth and height and prioritized the extraction from various weathering layers to unveil the attributes, causes, and mechanisms of salt weathering. The findings indicate that the Jinsha site's eastern segment suffered salt-induced damage, such as powdering, salt crusts, and blistering, due to the presence of gypsum and magnesium sulfate. These salts were primarily sourced from groundwater. Groundwater ions ascended to the site's surface via capillary action, instigating various forms of salt damage. Salt damage severity has a direct link to salt and moisture content. The degradation patterns can be categorized into powder and multi-layered composite deterioration, both seems related to soil particle composition. Powder deterioration tends to occur when the sand content exceeds 40%. This research proposes preservation strategies that focus on managing groundwater and conducting environmental surveillance. These measures are designed to effectively address and mitigate the risks associated with salt damage.

This study investigated how soil properties affect levee erosion and foundation scouring by evaluating the behavior of loose and cohesive (mixed) soils beneath a rigid crest under overflow conditions and analyzing flow dynamics within the scoured hole to understand the scouring mechanism. Four cases were examined with varying overtopping depths (Od): LS-FS, LS-FM, and LM-FS, at Od = 2 cm, and LS-FM at Od = 3 cm, where 'L' stands for levee, 'F' for foundation, 'S' for sand (#8), and 'M' for mixed soil (20% silt + 80% sand #8). The results revealed distinct differences among the cases. Notably, erosion of the back slope in the LM-FS case was delayed fourfold compared to LS-FS. In the LS-FM case, breaching of the levee body was delayed by 1.6 times compared to the LS-FS case with a 2 cm overtopping depth. Moreover, different scour hole geometries with complex flow patterns occurred in different timespans. Particle image velocimetry (PIV) was utilized on two physical scoured hole models to analyze the flow behavior within these scoured holes. The PIV analysis revealed the formation of twin eddies, moving in opposite directions and shaped by the nappe flow jet, which was instrumental in the development of the scour holes. This study found that foundation cohesion is more essential than the levee body in delaying levee breaches under rigid crest. Additionally, it revealed the role of twin eddies, especially the levee-side eddy, in increasing the size of the scoured hole upstream and causing levee breaches.