Abandoned farmlands are increasing due to socio-economic changes and land marginalization, and they require sustainable land management practices. Biocrusts are a common cover on the topsoil of abandoned farmlands and play an important role in improving soil stability and erosion resistance. The critical functions of biocrusts are known to mostly rely on their biofilaments and extracellular polymeric substances (EPS), but how these components act at microscopic scale is still unknown, while rheological methods are able to provide new insights into biocrust microstructural stability at particle scale. Here, bare soil and two representative types of biocrusts (cyanobacterial and moss crusts) developed on sandy (Ustipsamments) and sandy loam (Haplustepts) soils in abandoned farmlands in the northern Chinese Loess Plateau were collected at a sampling depth of 2 cm. Changes in the rheological properties of the biocrusts were analyzed with respect to their biofilament network and EPS contents to provide possible explanations. The rheological results showed that compared with bare soil, storage and loss moduli were decreased by the biocrusts on sandy soil, but they were increased by the biocrusts on sandy loam soil. Other rheological parameters tau max, gamma L, gamma YP, and Iz of biocrusts on both soils were significantly higher than those of bare soil, showing higher viscoelasticity. And the moss crusts had about 10 times higher rheological property values than the cyanobacterial crusts. Analysis from SEM images showed that the moss crusts had higher biofilament network parameters than the cyanobacterial crusts, including nodes, crosslink density, branches, branching ratio and mesh index, and biofilament density, indicating that the biofilament network structure in the moss crusts was more compact and complex in contrast to the cyanobacterial crusts. Additionally, EPS content of the moss crusts was higher than that of the cyanobacterial crusts on both soils. Overall, the crosslink density, biofilament density, and EPS content of the biocrusts were significantly and positively correlated with their gamma YP and Iz. The interaction between crosslink density and biofilament density contributed 73.2 % of gamma YP, and that between crosslink density and EPS content contributed 84.0 % of Iz. Our findings highlight the biocrusts-induced changes of abandoned farmland soil rheological properties in drylands, and the importance of biocrust biofilament network and EPS in maintaining abandoned farmland soil microstructural stability to resist soil water/wind erosion and degradation, providing a new perspective for sustainable management of abandoned farmlands.

This research explores the stabilization of clay soil through the application of geopolymer binder derived from silicomanganese slag (SiMnS) and activated by sodium hydroxide (NaOH). This research aims to evaluate the effects of key parameters, including the percentage of slag, the activator-to-stabilizer ratio, and curing conditions (time and temperature), on the mechanical properties of the stabilized soil. Unconfined compressive strength (UCS) tests were conducted to assess improvements in soil strength, while scanning electron microscopy (SEM) was employed to analyze the microstructural changes and stabilization mechanisms. The results demonstrated that clay soil stabilized with SiMnS-based geopolymers exhibited significant strength enhancement. Specifically, the sample stabilized with 20% SiMnS and an activator-to-slag ratio of 1.6, cured at room temperature for 90 days, achieved a UCS of 27.03 kg & frasl;cm2. The uniaxial strength was found to be positively correlated with the SiMnS content, activator ratio, curing time, and temperature. Additionally, the strain at failure remained below 1.5% for all samples, indicating a marked improvement in soil stiffness. SEM analysis revealed that geopolymerization led to the formation of a dense matrix, enhancing soil particle bonding and overall durability. These results emphasize the potential of SiMnS-based geopolymers as a sustainable and effective soil stabilizer for geotechnical applications.

Expansive soil, characterized by significant swelling-shrinkage behavior, is prone to cracking under wet-dry cycles, severely compromising engineering stability. This study combines experimental and molecular dynamics (MD) simulation approaches to systematically investigate the improvement effects and micromechanisms of polyvinyl alcohol (PVA) on expansive soil. First, direct shear tests were conducted to analyze the effects of PVA content (0 %-4 %) and moisture content (30 %-50 %) on the shear strength, cohesive force, and internal friction angle of modified soil. Results show that PVA significantly enhances soil cohesive force, with optimal improvement achieved at 3 % PVA content. Second, wet-dry cycle experiments revealed that PVA effectively suppresses crack propagation by improving tensile strength and water retention. Finally, molecular dynamics simulations uncovered the distribution of PVA between montmorillonite (MMT) layers and its influence on interfacial friction behavior. The simulations demonstrated that PVA forms hydrogen bonding networks, enhancing interlayer interactions and frictional resistance. The improved mechanical performance of PVAmodified soil is attributed to both nanoscale bonding effects and macroscale structural reinforcement. This study provides theoretical insights and technical support for expansive soil stabilization.

Researchers have tried hard to study the toxic effects of single pollutants like certain antibiotics and nanoplastic particles on plants. But we still know little about how these pollutants interact when they're together in the environment, and what combined toxic effects they have on plants. This study assessed the toxic effects of polystyrene nanoplastics (PS-NPs) and ciprofloxacin (CIP), both individually and in combination, on soybean (Glycine max L.) seedlings by various concentration gradients treatments of PS-NPs (0, 10, 100 mg/L) and CIP (0, 10 mg/L). The results indicated that high concentrations of PS-NPs significantly impeded soybean seedling growth, as evidenced by reductions in root length, plant height, and leaf area. CIP predominantly affected the physiological functions of leaves, resulting in a decrease in chlorophyll content. The combined exposure demonstrated synergistic effects, further intensifying the adverse impacts on the growth and physiological functions of soybean seedlings. Metabolomic analyses indicated that single and combined exposures markedly altered the metabolite expression profiles in soybean leaves, particularly related to amino acid and antioxidant defense metabolic pathways. These results indicate the comprehensive effects of NPs with antibiotics on plants and provide novel insights into toxic mechanisms.

Nanoplastics (NPs) and zinc (Zn), both widespread in soil environments, present considerable risks to soil biota. While NPs persist environmentally and act as vectors for heavy metals like Zn, their combined toxicity, especially in soil invertebrates, remains poorly understood. This study evaluates the individual and combined effects of Zn and NPs on earthworm coelomocytes and explores their interactions with Cu/Zn-superoxide dismutase (SOD), an antioxidant enzyme. Molecular docking revealed that NPs bind near the active site of SOD through pi-cation interactions with lysine residues, further stabilized by neighboring hydrophobic amino acids. Viability assays indicated that NPs alone (20 mg/L) had negligible impact (94.54 %, p > 0.05), Zn alone (300 mg/L) reduced viability to 80.02 %, while co-exposure reduced it further to 73.16 %. Elevated levels of reactive oxygen species (ROS) and malondialdehyde (MDA) levels were elevated to 186 % and 173 % under co-exposure, alongside greater antioxidant enzyme disruption, point to synergistic toxicity. Dynamic light scattering and zeta potential (From -13 to -7 mV) analyses revealed larger particle sizes in the combined system, indicative of enhanced protein interactions. Conformational changes in SOD, such as alpha-helix loss and altered fluorescence, further support structural disruption. These findings demonstrate that co-exposure to NPs and Zn intensifies cellular and protein-level toxicity via integrated physical and biochemical mechanisms, providing critical insight into the ecological risks posed by such co-contaminants in soil environments.

This study was carried out to evaluate the interaction between terrestrial food crop plants and microplastics (MPs) with a focus on understanding their uptake, effects on growth, physiological, biochemical, and yield characteristics of two different cultivars of Solanum tuberosum L. i.e., Variety-1, Astrix (AL-4) and Variety-2, Harmes (WA-4). Polyethylene (PE), polystyrene (PS), and polypropylene (PP) spheres of size 5 mu m were applied to the soil at concentrations of 0 %, 1 %, and 5 %. Morphological parameters, including seed germination rate, shoot and root lengths, leaf area, and fresh and dry biomass of plants, got reduced significantly with the increase in MP concentration. PS MPs caused the most negative impact, particularly at 5 %, leading to the greatest decline in growth and Na, Mg, Zn, Cu, Ni, and Mn nutrient content. The highest DPPH scavenging activity was observed in the 5 % PS MPs treatment with approximately a 45.34 % increase from the control, indicating its potential to enhance antioxidant activity in response to stress caused by PS MPs. Both reducing and non-reducing sugar contents and total proteins were also decreased significantly. Vitamin C content exhibited a significant increase in response to MPs, with the highest levels recorded under 5 % PS MPs treatments. This suggests an adaptive antioxidant response to mitigate oxidative damage induced by MPs. SEM analysis revealed tissue infiltration of MP particles in shoots, leaves, and tubers of both varieties. Among MPs, PS had the most detrimental effects, followed by PP and PE, with higher concentrations increasing the negative impact.

Lunar soil, as an in-situ resource, holds significant potential for constructing bases and habitats on the Moon. However, such constructions face challenges including limited mechanical strength and extreme temperature fluctuations ranging from -170 degrees C to +133 degrees C between lunar day and night. In this study, we developed a 3D-printed geopolymer derived from lunar regolith simulant with an optimized zig-zag structure, exhibiting exceptional mechanical performance and thermal stability. The designed structure achieved remarkable damage tolerance, with a compressive strength exceeding 12.6 MPa at similar to 80 vol% porosity and a fracture strain of 3.8 %. Finite element method (FEM) simulations revealed that the triangular frame and wavy interlayers enhanced both stiffness and toughness. Additionally, by incorporating strategically placed holes and extending the thermal diffusion path, we significantly improved the thermal insulation of the structure, achieving an ultralow thermal conductivity of 0.24 W/(m K). Furthermore, an iron-free geopolymer coating reduced overheating under sunlight by 51.5 degrees C, underscoring the material's potential for space applications.

This study explores the effectiveness of soft viscoelastic biopolymer inclusions in mitigating cyclic liquefaction in loosely packed sands. This examination employs cyclic direct simple shear testing (CDSS) on loose sand treated with gelatin while varying the gelatin concentration and the cyclic stress ratio (CSR). The test results reveal that the inclusion of soft, viscoelastic gelatin significantly reduces shear strain and excess pore pressure during cyclic shear. Liquefaction potential, defined as the number of cycles to liquefaction (NL) at an excess pore pressure ratio (ru = Delta u/sigma ' vo) of 0.7, is substantially improved in gelatin-treated sands compared to gelatin-free sands. This improvement in liquefaction resistance is more pronounced as the inclusion stiffness increases. Furthermore, the viscoelastic pore-filling inclusion helps maintain skeletal stiffness during cyclic shearing, resulting in a higher shear modulus in gelatin-treated sand in both small and large-strain regimes. At a grain scale, pore-filling viscoelastic biopolymers provide structural support to the skeletal frame of a loosely packed sand. This pore filler mitigates volume contraction and helps maintain the effective stress of the soil structure, thereby reducing liquefaction potential under cyclic shearing. These findings underscore the potential of viscoelastic biopolymers as bio-grout agents to reduce liquefaction risk in loose sands.

The application of coating materials to regulate nitrogen release is a crucial strategy for minimizing fertilizer loss and alleviating agricultural nitrogen pollution. However, it remains a significant challenge to develop ecofriendly coatings that are both biodegradable and effective in slow-release. In this study, Ca/Al layered double hydroxides (LDHs) were incorporated into a conventional polyvinyl alcohol/polyvinylpyrrolidone (PVA/ PVP) matrix to create PVA/PVP-LDHs composite films. The inclusion of LDHs (1.0 %, w/w) resulted in a 32 % enhancement in water resistance, a 10 % reduction in water vapor/ammonia permeability, and a 16 % improvement in mechanical properties. These enhanced performances by addition of LDHs were attributed to the combined effects of the tortuous diffusion pathways, and the formation of robust hydrogen bonding networks between the hydroxyl groups of LDHs and PVA/PVP at the organic-inorganic interface. These interactions could reduce free hydroxyl groups on the film surface, leading to hydrophobicity and structural integrity. The composite films exhibited significantly reduced nitrogen permeability under various pH conditions, indicating the improved stability in both acidic and alkaline soil environments. Degradation experiments revealed that the composite film lost 40 % of its mass over 120 days, with a half-life only 8.0 % longer than pure PVA/PVP. These results indicated that the incorporation of LDHs had minimal impact on biodegradability, maintaining the environmental compatibility of the films. These findings highlight the potential of PVA/PVP-LDHs composite films as sustainable, eco-friendly, and efficient slow-release fertilizer coatings, offering a practical solution for improving nitrogen use efficiency and reducing agricultural nitrogen pollution.

Poly(butylene adipate-co-terephthalate) (PBAT) is a promising polymer with excellent mechanical properties and biodegradability. However, knowledge gaps between its degradation and mineralization processes in soil hampers its environmental impact and application potential. In this study, we elucidated the degradation process of PBAT, starting with the degradation of high-molecular-weight polymers into 30 intermediates, before ultimately mineralized into CO2. Bacteria and fungi drove the degradation and mineralization of these intermediates. We discovered that PBAT was synergistically degraded by combinations of 27 bacterial and fungal biomarkers rather than by single biomarkers dominated by Bacteroidota, Acidobacteriota, and Ascomycota. These combinations of related functional genes perform various functions at every stage of PBAT degradation, including breaking down molecular structures, degrading intermediates, and mineralization. Bacterial biomarkers showed greater diversity than fungal biomarkers in degrading PBAT. Our findings provide useful insights into the degradation of PBAT in soil and a foundation for systematically evaluating and controlling the environmental behavior and safety of PBAT in soil.