This study introduces a coupled peridynamics (PD) and smoothed particle hydrodynamics (SPH) model to handle the complex physical processes in concrete dam structures subjected to near-field underwater explosions. A robust coupling algorithm is applied to ensure accurate data exchange between PD and SPH domains, enabling the simulation of fluid-structure interactions. To account for the material behavior under high strain rates, a rate- dependent concrete model is integrated into the PD-SPH framework. The developed PD-SPH model is validated through simulations of centrifugal model tests, with results benchmarked against experimental findings and finite element method (FEM) predictions. The simulation captures key damage features, including horizontal tensile cracking at the dam head and an oblique penetrating crack in the dam body, forming an angle of approximately 17 degrees relative to the horizontal. Velocity and strain responses at critical monitoring points demonstrate strong agreement with FEM results, showcasing the model's capability in accurately predicting the structural responses and failure of concrete dams caused by underwater explosions. To the best of the authors' knowledge, research applying a coupled PD-SPH model to concrete structures under blast loading is still rare, particularly when considering the entire physical process, from explosive detonation to structural failure, accounting for fluid-structure interactions.

Huaca de la Luna is a monumental earthen complex near Trujillo, Peru built by the Moche civilization from 200 to 850 C.E. Its principal structure, a stepped pyramid constructed with millions of adobe bricks on sloping bedrock and sandy soil, presents severe structural damage at the northwest corner. A sensitivity study of the static and dynamic response of the pyramid is conducted in Abaqus/CAE Explicit using 2D and 3D nonlinear finite element models derived from archaeological, material, and geotechnical data. Concrete damaged plasticity and Mohr-Coulomb formulations are adopted to represent adobe and sandy soil, respectively. Models undergo quasi-static gravitational loading followed by dynamic application of lateral ground accelerations. Lateral capacity is defined as the applied acceleration that produces collapse and is identified from the time-evolution of elastic strain and plastic dissipation energies. Initial 2D sensitivity analysis investigates the effect on lateral capacity of adobe tensile strength, bedrock/soil configuration, west fa & ccedil;ade profile, eastward architecture, and plastic dilation angle. Critical configurations identified from 2D analysis are expanded into 3D models. All results show stability under gravitational load. At dynamically induced failure, damage corresponds closely to the extant collapse of the northwest corner of the pyramid, suggesting that present damage is due to seismic activity.

This paper proposes a new method for computing the undrained lateral capacity of Reinforced Concrete (RC) piles in cohesive soils, overcoming inherent conservativeness of classical Broms' theory. The proposed method relies on a new theoretical distribution for the limiting soil resistance, simple enough to derive closed-form solutions of the undrained lateral capacity, for different restraints at the pile head and for all possible failure mechanisms. After validation against numerical results and experimental data, the model is used to compute the failure envelope of RC piles under generalised loading. 3D FE analyses are used as benchmark to identify the main factors governing the ultimate response of RC piles. To this purpose, the Concrete Damaged Plasticity model is adopted to reproduce nonlinear concrete behaviour, which is an essential ingredient when modelling pile behaviour under horizontal loading. FE analyses show that, contrary to what observed for rigid and elastic piles, the ultimate response of RC piles relies on the soil strength mobilised at shallow depths, where the normalised lateral soil resistance basically depends on the sole adhesion factor. The proposed solutions are readily applicable to the design of single piles, as well as to the computation of three-dimensional interaction domains of pile groups.

Precast prestressed high-strength concrete (PHC) pipe pile with cement-improved soil is a novel pile foundation technique that has been extensively utilized in contemporary years due to the enhanced lateral load-bearing capacity in soft grounds. However, though several studies have shown the damage mechanism of single piles with cement-improved soil, the group behavior of such pile foundations is still largely unexplored. Hence, this article aims to illustrate the lateral capacity and tension-induced failure characteristics of single and 1 x 2 group PHC piles reinforced by cement-improved soil. Extensive 3D nonlinear finite element analyses have been performed and the precision of the numerical models is confirmed by a previous experimental-numerical study. The effects of pile spacing, embedment length, and cement-improved soil thickness were examined in terms of various lateral responses and damages. Results have revealed that the addition and thickening of CIS around core piles enhances the overall pile performance and protects the core pile from excessive tensile damage. Declines in head displacement and bending moment were found to be up to 45 % and 25 % for single piles, and up to 47 % and 24 % for group piles, respectively. Moreover, the presence of CIS makes the stress distribution mechanism between the trailing and leading piles in group arrangement more uniform. Results of this study are expected to provide valuable insights for a better understanding of the damage behavior of group precast piles reinforced with cement-improved soil.

Zhuanyao dwellings faced significant seismic risks in rural regions of China. Therefore, a shaking-table test was performed to explore the seismic performance of Zhuanyaos and validate the finite-element simulation results. The results showed that the damage to the pier and roof levels of Zhuanyaos was more severe after earthquakes, resulting in a noteworthy increase in the displacement responses of these two levels compared to that of the vault level. The damage to the front structure (Yaolian) and mid-pier of the Zhuanyao were more severe than the damage to the back wall and side pier, respectively, which caused a significant reduction in acceleration responses of Yaolian and mid-pier. Following the crack development, dynamic response, and field investigation, three typical collapse modes of Zhuanyaos were presented. Subsequently, the parametric analysis was conducted using a verified finite-element simulation method. The results show that using the catenary arch can reduce earthquake damage in Zhuanyaos. Increasing the width of the middle pier can improve the seismic performance of Zhuanyaos to a certain extent; however, it may exacerbate local damage to the structure. Besides, the high seismic vulnerability of Zhuanyaos stemming from an increasing thickness of overlying soil cannot be ignored.

This study investigates the effects of adjacent deep excavation on the seismic performance of buildings. For that purpose, the numerical models are constructed for different buildings (i.e., 5-Story building and 15-Story building) considering the deep excavation-soil-structure interaction (ESSI) and soil-structure interaction (SSI). The results achieved from the ESSI and SSI systems are discussed and compared. Fully nonlinear numerical models with material, geometric, and contact nonlinearities are developed. Eleven earthquakes with different intensities, epicentral distances, significant durations, and frequency contents are applied to the models; and, the numerical results are given in terms of average records. The buildings are carefully designed and verified based on common design codes. The numerical modelling procedure of the deep excavation-soil system is validated using centrifuge test data. The comparisons between the ESSI and SSI systems are carried out in terms of accelerations, lateral displacements, inter-story drifts, story shear forces, and the nonlinear behavior of the soil medium under the buildings. The results show that it is necessary to consider the ESSI effect, and it might significantly change the seismic behavior of buildings adjacent to the deep excavations. The findings from this study can provide valuable recommendations for engineers to design buildings close to deep excavations under earthquakes.

In recent decades, the protection and vulnerability of civil structures under explosion loads became a critical issue in terms of security, which may cause loss of lives and structural damage. Concrete retaining walls also restrict soils and slopes from displacements; meanwhile, intensive temporary loading may cause massive damage. In the current study, the modified Johnson-Holmquist (also known as J-H2) material model is implemented for concrete materials to model damages into the ABAQUS through user-subroutines to predict the blasting-induced concrete damages and volume strains. For this purpose, a 3D finite-element model of the concrete retaining wall was conducted in coupled Eulerian-Lagrangian simulation. Subsequently, a blast load equal to 500 kg of TNT was considered in three different positions due to UFC 3-340-02. Influences of the critical parameters in smooth blastings, such as distance from a free face, position, and effective blasting time, on concrete damage rate and destroy patterns, are explored. According to the simulation results, the concrete penetration pattern at the same distance is significantly influenced by the density of the progress environment. The result reveals that the progress of waves and the intensity of damages in free-air blasting is entirely different from those that progress in a dense surrounding atmosphere such as soil. Half-damaged elements in air blasts are more than those of embedded explosions, but dense environments such as soil impose much more pressure in a limited zone and cause more destruction in retaining walls.