Further investigation into the progression of soil arching under the impact of noncentered tunnel is warranted. This study addresses this need by examining trapdoor models with varying vertical and horizontal spacings between the tunnel and the trapdoor through the discrete element method. The numerical model underwent calibration utilizing data from previous experiments. The results indicated that the soil arching ratio under the impact of noncentered tunnel exhibits four distinct stages: initial soil arching, maximum soil arching, load recovery, and ultimate stage, aligning with observations unaffected by tunnel presence. The minimal disparity in stress ratio within the stationary region was observed when the vertical spacing between the tunnel and the trapdoor ranges between 150 and 200 mm. Moreover, the disturbed area on the left part of the trapdoor extended significantly beyond the trapdoor width, with notably higher disturbance height compared to the right side. When the tunnel deviated from the centerline of the trapdoor, the stress enhancement on the right side was considerably greater compared to the left. Additionally, the displacement of the trapdoor resulted in a reduction of contact force anisotropy in the soil on the side more distant from the tunnel, while increasing it on the side closer to the tunnel.