The prevalent presence of microplastics in marine environments poses major ecological risks requiring innovative approaches to their management and reduction. This study addresses a knowledge gap in biodegradable microplastic alternatives by looking at the biodegradability and properties of reclaimed microplastic polypropylene (PP) blended with polylactic acid (PLA). The study lies in the systematic exploration of various PP/PLA formulations, evaluating their potential for enhanced biodegradability without significantly compromising mechanical performance. Microplastic PP and PLA blends were prepared in various ratios using the melt blending method. The blend was characterized using Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) to confirm the presence and morphology of the components. The mechanical properties were evaluated using tensile strength tests. A blend of 90% PP and 10% PLA was found to retain the highest tensile strength even after immersion in seawater. The thermal stability and degradation behavior were analyzed using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). This shows that increasing PLA content affects the thermal properties of the blends. Seawater immersion and soil burial tests were used to assess the biodegradability of the blends. The results showed that the blends' biodegradation was confirmed by increases in conductivity and salinity in the seawater and weight loss in the soil burial. The major findings show that blending PP and PLA improves biodegradability while maintaining adequate mechanical properties. Tests including immersion in saltwater and soil burial were used to assess the biodegradability of the blends. The results showed that the blends' biodegradation was confirmed by increases in conductivity and salinity in the seawater and weight loss in the soil burial. The major findings show that blending PP and PLA improves biodegradability while maintaining adequate mechanical properties. Finally, this study presents a new approach to reducing microplastic pollution through the blend of reclaimed PP with biodegradable PLA, resulting in a sustainable material with improved environmental performance. Future studies should look into new formulations, biodegradable polymers, and long-term degradation tests under a variety of environmental circumstances.