The Tacquet Formation (TF) was first identified in geologic mapping of southern Mare Serenitatis as a distinct low albedo region split by the linear Rimae Menelaus rilles. A distinct western dome, split by a linear rille and less distinct eastern dome (the Menelaus domes) are also present within the TF. Previous Earth-based radar analyses showed that the TF has a lower circular polarization ratio consistent with a pyroclastic mantle. In this study, compositional and spectroscopic parameters were derived from Moon Mineralogy Mapper (M-3) data. Lunar Reconnaissance Orbiter Camera Wide Angle Camera (LROC WAC) and SELENE Kaguya Multiband Imager (MI) multispectral data were also utilized. FeO derived from MI data for the TF and Menelaus domes was elevated at levels consistent with pyroclastic glasses. While not diagnostic of pyroclastics, TiO2 derived from LROC WAC data over the TF and Menelaus domes was also elevated relative to the background materials. Analysis of 1 and 2 mu m band parameters also show the TF and Menelaus domes as being distinct with a band center moderately longer than 1 mu m and 2 mu m band center shorter than the surroundings, characteristics consistent with pyroclastic glass and/or increased ilmenite. M-3 data thermally corrected via two different thermal correction approaches indicate a moderately deeper band in the 3 mu m region indicative of OH and/or H2O, a characteristic that is also potentially associated with pyroclastic deposits. These compositional findings are consistent with the Earth-based radar data suggesting that the TF is a pyroclastic mantle and potentially represents a previously unrecognized sub-class of pyroclastic deposits associated with lunar volcanic domes.

In a new era of lunar exploration, pyroclastic deposits have been identified as valuable targets for resource utilization and scientific inquiry. Little is understood about the geomechanical properties and the trafficability of the surface material in these areas, which is essential for successful mission planning and execution. Past incidents with rovers highlight the importance of reliable information about surface properties for future, particularly robotic, lunar mission concepts. Characteristics of 149 boulder tracks are measured in Lunar Reconnaissance Orbiter Narrow Angle Camera images and used to derive the bearing capacity of pyroclastic deposits and, for comparison, mare and highland regions from the surface down to similar to 5-m depth, as a measure of trafficability. Results are compared and complemented with bearing capacity values calculated from physical property data collected in situ during Apollo, Surveyor, and Lunokhod missions. Qualitative observations of tracks show no region-dependent differences, further suggesting similar geomechanical properties in the regions. Generally, bearing capacity increases with depth and decreases with higher slope gradients, independent of the type of region. At depths of 0.19 to 5m, pyroclastic materials have bearing capacities equal or higher than those of mare and highland material and, thus, may be equally trafficable at surface level. Calculated bearing capacities based on orbital observations are consistent with values derived using in situ data. Bearing capacity values are used to estimate wheel sinkage of rover concepts in pyroclastic deposits. This study's findings can be used in the context of traverse planning, rover design, and in situ extraction of lunar resources. Plain Language Summary Future explorers will be visiting pyroclastic deposits for research and resource extraction. However, the properties of the surface are not well known and it is unclear how well vehicles and humans are able to travel across these areas. Properties of 149 boulder tracks are measured in spacecraft imagery and are used to derive estimations for the strength of pyroclastic, mare, and highland area material from the surface down to similar to 5-m depth. Results are compared and complemented with soil strength estimates that have been derived based on in situ measurements taken during previous lunar surface missions. In all regions of interest, tracks have similar appearances, implying that the surface material has comparable properties. Generally, soil strength increases with increasing depth and decreases with higher local slope angles. At depth, pyroclastic deposits show equal or significantly higher strength in comparison to mare and highland areas and, therefore, might be equally trafficable at surface level. Calculations based on globally distributed spacecraft images agree with values derived from Apollo-era in situ data. Based on the soil strength, the sinkage of rovers in the areas of interest is estimated. Potential applications of this work include rover design and mission planning, infrastructure construction, and resource extraction.

We present new observations of pyroclastic deposits on the surface of Mercury from data acquired during the orbital phase of the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) mission. The global analysis of pyroclastic deposits brings the total number of such identified features from 40 to 51. Some 90% of pyroclastic deposits are found within impact craters. The locations of most pyroclastic deposits appear to be unrelated to regional smooth plains deposits, except some deposits cluster around the margins of smooth plains, similar to the relation between many lunar pyroclastic deposits and lunar maria. A survey of the degradation state of the impact craters that host pyroclastic deposits suggests that pyroclastic activity occurred on Mercury over a prolonged interval. Measurements of surface reflectance by MESSENGER indicate that the pyroclastic deposits are spectrally distinct from their surrounding terrain, with higher reflectance values, redder (i.e., steeper) spectral slopes, and a downturn at wavelengths shorter than similar to 400nm (i.e., in the near-ultraviolet region of the spectrum). Three possible causes for these distinctive characteristics include differences in transition metal content, physical properties (e.g., grain size), or degree of space weathering from average surface material on Mercury. The strength of the near-ultraviolet downturn varies among spectra of pyroclastic deposits and is correlated with reflectance at visible wavelengths. We suggest that this interdeposit variability in reflectance spectra is the result of either variable amounts of mixing of the pyroclastic deposits with underlying material or inherent differences in chemical and physical properties among pyroclastic deposits. Key Points We expand the catalog of pyroclastic deposits on Mercury from 40 to 51 Stratigraphic relationships suggest emplacement over a prolonged interval Deposits exhibit distinct spectral signatures with interdeposit variability

Moon Mineralogy Mapper spectroscopic observations are used to assess the mineralogy of five sites that have recently been proposed to include lunar dark mantle deposits (DMDs). Volcanic glasses have, for the first time, clearly been identified at the location of three of the proposed pyroclastic deposits. This is the first time that volcanic glasses have been identified at such a small scale on the lunar surface from remote sensing observations. Deposits at Birt E, Schluter, and Walther A appear to be glassy DMDs. Deposits at Birt E and Schluter show (1) morphological evidence suggesting a likely vent and (2) mineralogical evidence indicative of the presence of volcanic glasses. The Walther A deposits, although they show no morphological evidence of vents, have the spectroscopic characteristics diagnostic of volcanic glasses. The deposits of the Freundlich-Sharonov basin are separated in two areas: (1) the Buys-Ballot deposits lack mineralogical and morphological evidence and thus are found to be associated with mare volcanism not with DMDs and (2) the Anderson crater deposits, which do not exhibit glassy DMD signatures, but they appear to be associated with possible vent structures and so may be classifiable as DMDs. Finally, dark deposits near the crater Kopff are found to be associated with likely mare volcanism and not associated with DMDs. The spectral identification of volcanic glass seen in many of the potential DMDs is a strong indicator of their pyroclastic origin.

We have conducted spectral and spatial analysis of the Compton-Belkovich Thorium Anomaly (61.1 degrees N, 99.5 degrees E) region on the far side of the Moon based on high-resolution data from recent lunar missions. Chandrayaan-1 Moon Mineralogy Mapper data of Compton-Belkovich volcanic complex (CBVC) reveal the existence of a strong doublet feature near 2800 nm throughout the volcanic construct, which could be attributed to the presence of water and/or hydroxyl in the studied site. Very high resolution Lunar Reconnaissance Orbiter Camera-Narrow Angle Camera mosaic of the study area shows that the strongest of the hydration features within the CBVC is primarily related with either sunlit inner flanks of small-sized fresh craters or fresh escarpments associated with the central collapse structure. Moreover, Mini-RF Synthetic Aperture Radar data from Lunar Reconnaissance Orbiter mission suggests the presence of a thick pyroclastic deposit in the volcanic complex. Our study indicates that the enhanced hydration at CBVC could possibly have originated from the episodic events of eruption and effusion involving silicic magma, which could probably be responsible for the tapping of a zoned magma body with a water-rich cap. Morphology of CBVC also confirms the presence of episodic effusive and eruptive events that probably had led to the formation of elevated topography, central collapsed feature and late eruptive domes in the study area.