共检索到 4

Pioneering results of seed-potato health improvement and the suppression of soil-borne infection during the potato production by the preplant coating of tubers with an azoxystrobin-loaded degradable polymer film coating are presented. The film coating was applied to the surface of potato tubers by spraying with a 1% solution of the degradable polymer poly(3-hydroxybutyrate) in dichloromethane mixed with azoxystrobin. The film coating did not damage the tubers or reduce germination. The half-life of the polymer coating in field soil was 25 days. The film degraded gradually from potato planting to the beginning of flowering, ensuring long-term delivery of the fungicide to the plants. In the experimental group, a more effective reduction in the total number of rhizospheric soil fungi, including plant pathogens Alternaria alternata and Fusarium oxysporum, was revealed, compared with the preplant treatment of tubers with the commercial fungicide azoxystrobin (comparison group). The healing effect of the fungicide-loaded coating led to an improvement in the quality of the potato crop. In the experimental group, the total yield and the share of marketable tubers exceeded those of the comparison group by 5.6 t/ha and 8%, respectively. The proportion of Fusarium infected tubers was 8.5% in the experimental group versus 12.1% in the comparison group. The fungicidal effect of a long-term degradable polymer film coating with azoxystrobin was more successful than traditional treatment of tubers with a solution of this fungicide. Thus, the proposed approach is promising for the protection of seed potatoes.

期刊论文 2025-01-01 DOI: 10.1007/s10924-024-03417-z ISSN: 1566-2543

The results of the study of plastic composites from degradable poly(3-hydroxybutyrate) P(3HB) and cellulose-containing natural materials of various origins are presented. For the first time, P(3HB) composites filled with bacterial nanocellulose (BNC) or wood (Pinus sibirica) flour (WF) were produced by melt pressing at 170 degrees C and 2000 Pa. The influence of the filler type and amount (30, 40, 50, 70 and 90 wt%) on the physicochemical and mechanical properties of the composites and their degradability in soil laboratory microcosms was revealed. The P(3HB)/WF composites compared with P(3HB)/BNC ones were thermally stable; their thermal degradation temperatures were 266 and 227 degrees C, respectively. Both composites had lower values of Young's modulus and fracture strength compared to P(3HB). As BNC content was increased, Young's modulus and fracture strength of the composites increased from 1831 to 14 MPa to 3049 and 19 MPa, in contrast to P(3HB)/WF, where the values decreased by a factor of 1.5-2.0. The half-life of composites with BNC and WF in soil was 180 and 220 days, respectively. Changes in the structure of the microbial community were determined as depending on the filler type; primary destructors among bacteria and fungi were isolated and identified. Environmentally friendly and completely degradable composites show promise as cellulose-plastic materials for practical application.

期刊论文 2024-11-01 DOI: 10.1007/s10570-024-06212-0 ISSN: 0969-0239

One of the latest trends in sustainable agriculture is the use of beneficial microorganisms to stimulate plant growth and biologically control phytopathogens. Bacillus subtilis, a Gram-positive soil bacterium, is recognized for its valuable properties in various biotechnological and agricultural applications. This study presents, for the first time, the successful encapsulation of B. subtilis within electrospun poly(3-hydroxybutyrate) (PHB) fibers, which are dip-coated with cellulose derivatives. In that way, the obtained fibrous biohybrid materials actively ensure the viability of the encapsulated biocontrol agent during storage and promote its normal growth when exposed to moisture. Aqueous solutions of the cellulose derivatives-sodium carboxymethyl cellulose and 2-hydroxyethyl cellulose, were used to dip-coat the electrospun PHB fibers. The study examined the effects of the type and molecular weight of these cellulose derivatives on film formation, mechanical properties, bacterial encapsulation, and growth. Scanning electron microscopy (SEM) was utilized to observe the morphology of the biohybrid materials and the encapsulated B. subtilis. Additionally, ATR-FTIR spectroscopy confirmed the surface chemical composition of the biohybrid materials and verified the successful coating of PHB fibers. Mechanical testing revealed that the coating enhanced the mechanical properties of the fibrous materials and depends on the molecular weight of the used cellulose derivatives. Viability tests demonstrated that the encapsulated B. subtilis exhibited normal growth from the prepared materials. These findings suggest that the developed fibrous biohybrid materials hold significant promise as biocontrol formulations for plant protection and growth promotion in sustainable agriculture.

期刊论文 2024-10-01 DOI: 10.3390/polym16192749

This article addresses the entire life cycle of the all-green fibrous materials based on poly(3-hydroxybutyrate) (PHB) containing a natural biocompatible additive Hemin (Hmi): from preparation, service life, and the end of life upon in-soil biodegradation. Fibrous PHB/Hmi materials with a highly developed surface and interconnected porosity were prepared by electrospinning (ES) from Hmi-containing feed solutions. Structural organization of the PHB/Hmi materials (porosity, uniform structure, diameter of fibers, surface area, distribution of Hmi within the PHB matrix, phase composition, etc.) is shown to be governed by the ES conditions: the presence of even minor amounts of Hmi in the PHB/Hmi (below 5 wt %) serves as a powerful tool for the control over their structure, performance, and biodegradation. Service characteristics of the PHB/Hmi materials (wettability, prolonged release of Hmi, antibacterial activity, breathability, and mechanical properties) were studied by different physicochemical methods (scanning electron microscopy, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, differential scanning calorimetry, contact angle measurements, antibacterial tests, etc.). The effect of the structural organization of the PHB/Hmi materials on their in-soil biodegradation at the end of life was analyzed, and key factors providing efficient biodegradation of the PHB/Hmi materials at all stages (from adaptation to mineralization) are highlighted (high surface area and porosity, thin fibers, release of Hmi, etc.). The proposed approach allows for target-oriented preparation and structural design of the functional PHB/Hmi nonwovens when their structural supramolecular organization with a highly developed surface area controls both their service properties as efficient antibacterial materials and in-soil biodegradation upon the end of life.

期刊论文 2024-03-14 DOI: 10.1021/acsabm.4c00010 ISSN: 2576-6422
  • 首页
  • 1
  • 末页
  • 跳转
当前展示1-4条  共4条,1页