Soil treatment with natural materials is an effective method to improve the mechanical properties of the original soil for recycling engineering construction. This research aims to evaluate the synergistic effects of lignin fiber and cement on sandy clayey silt stabilization. A factorial experimental design was employed, testing five lignin fiber contents (0%, 2%, 4%, 6%, and 8%) and three cement contents (0%, 2%, and 4%) across four curing periods (1, 7, 14, and 30 days). Unconfined compressive strength (UCS) tests were conducted in triplicate for each combination (total *n* = 180 samples), and failure surfaces were analyzed using Scanning Electron Microscopy with Energy Dispersive X-ray spectroscopy (SEM-EDX). Results indicate a critical lignin fiber threshold of 4%, beyond which UCS decreased by 15-20% due to increased void ratios. Statistical analysis (ANOVA, *p* < 0.05) confirmed significant interactions between lignin fiber, cement content, and curing time. For instance, 4% lignin fiber and 4% cement yielded a 139% UCS increase after 30-day curing compared to untreated soil. SEM-EDX revealed that lignin fiber networks enhance ductility by bridging soil particles, while cement hydration reduced particle detachment. These findings provide a quantitative framework for optimizing lignin fiber-cement stabilization in sustainable geotechnical applications.

Due to the high degree of weathering, the red clay slope has low anti-disintegration performance, and the clay easily becomes wet and disintegrates after soaking in water. It causes geological problems such as slope collapse caused by soil softening. To study the disintegration characteristics of modified red clay, the disintegration test of red clay modified by using lignin fiber, clay particles and lime was carried out, analyzing the disintegration characteristics of improved red clay from physical and chemical perspectives and analyzing the improvement mechanism of three modifiers with the scanning electron microscopy test. The analysis results show that the water-holding capacity and disintegration resistance of soil mixed with lignin fiber decrease; the disintegration time of reshaped red clay increases with the increase in clay content; and the average disintegration rate of the soil decreases with the increase in clay content. With the increase in lime content, the soil cement increases. The integrity of the soil is enhanced, and its anti-disintegration ability is improved; the saturated moisture content of reshaped red clay increases with the increase in lignin fiber and clay content, while the saturated moisture content of soil decreases with the increase in lime content. The damage analysis shows that the larger the damage factor of soil, the worse its anti-disintegration ability, and the easier the soil disintegrates. The purpose of this paper is to explore the essence of the soil disintegration phenomenon, and on this basis, using high-quality improved materials, to improve the soil, which easily disintegrates. This move aims to significantly enhance the anti-disintegration ability of the soil, thereby improving its resistance to softening and disintegration, thereby effectively improving and maintaining the ecological environment. At the same time, the improved soil will help to improve the utilization rate of the slope and foundation soil, thereby reducing the economic cost of maintenance engineering. Against the current background of sustainable economic, social, and ecological development, it is of great strategic significance to ensure the sustainable availability of land resources in specific areas and maintain their productivity and ecological stability for a long time. The research into this subject not only helps to deepen the understanding of soil disintegration, but also provides strong technical support for the rational utilization of land resources and the protection of the ecological environment.

Expansive soil exhibits significant swellings and shrinkages, which may result in severe damage or the collapse of structures built upon it. Calcium-based admixtures, such as lime, are commonly used to improve this problematic soil. However, traditional chemical additions can increase significant environmental stress. This paper proposes a sustainable solution, namely, the use of lignin fiber (LF) from the paper industry to partially replace lime as an amendment for expansive soils. Both the macroscopic and microscopic characteristics of the lignin fiber-treated expansive soil are extensively studied. The results show that the mechanical properties of expansive soil are improved by using lignin fiber alone. Under the condition of an optimal dosage of 8%, the compressive strength of lignin fiber-modified soil can reach 193 kPa, the shear strength is increased by 40% compared with the untreated soil, and the water conductivity is also improved with the increase in dosage. In addition, compared with 2% lime-modified soil, the compressive strength of 8% lignin fiber- and 2% lime composite-treated expansive soil increased by 50%, the cohesion increased by 12%, and the water conductivity decreased significantly. The microstructure analysis shows that at an 8% lignin fiber content, lignin fibers interweave into a network in the soil, which effectively enhances the strength and stability of the improved soil. Simultaneously, the fibers can form bridges across the adjacent micropores, leading to the merging of pores and transforming fine, dispersed micropores into larger, connected macropores. Lime promotes the flocculation of soil particles, forming larger aggregates and thus resulting in larger pores. The addition of fibers exerts an inhibitory effect on the flocculation reaction in the composite-improved soil. In conclusion, lignin fibers are an effective addition used to partially replace calcium admixture for the treatment of expansive soil, which provides a sustainable and environmentally friendly treatment scheme for reducing industrial waste.