Genera Pseudomonas and Xanthomonas include bacterial species that are etiological agents of several diseases of major vegetable crops, such as tomato, pepper, bean, cabbage and cauliflower. The bacterial pathogens of those genera may cause severe crop damage, leading to symptoms like leaf spots, wilting, blights, and rotting. These plant pathogens can affect propagation materials and spread rapidly through plant tissues, contaminated soils, or water sources, making them challenging to control using conventional chemical products alone. Biopesticides, such as essential oils (EOs), are nowadays studied, tested and formulated by employing nano- and micro-technologies as innovative biological control strategies to obtain more sustainable products using less heavy metal ions. Moreover, there is a growing interest in exploring new biological control agents (BCAs), such as antagonistic bacterial and fungal species or bacteriophages and understanding their ecology and biological mechanisms to control bacterial phytopathogens. These include direct competition for nutrients, production of antimicrobial compounds, quorum quenching and indirect induction of systemic resistance. Optimisation of the biocontrol potential goes through the development of nanoparticle-based formulations and new methods for field application, from foliar sprays to seed coatings and root inoculation, aimed to improve microbial stability, shelf life, controlled release and field performance. Overall, the use of biological control in horticultural crops is an area of research that continues to advance and shows promising potential. This review aims to provide an in-depth exploration of commercially accessible biocontrol solutions and innovative biocontrol strategies, with a specific focus on the management of bacterial diseases in vegetable crops caused by Pseudomonas and Xanthomonas species. In this article, we highlighted the advancements in the development and use of EOs and other BCAs, emphasizing their potential or shortcomings for sustainable disease management. Indeed, despite the reduced dependence on synthetic pesticides and enhanced crop productivity, variable regulatory frameworks, compatibility among different BCAs, and consistent performance under field conditions are among the current challenges to their commercialization and use. The review seeks to contribute valuable insights into the evolving landscape of biocontrol in vegetable crops and to provide guidance for more effective and eco-friendly solutions against plant bacterial diseases.

PurposeThe present work aims to prepare biocomposites blend based on linear low density polyethylene/ starch without using harmful chemicals to improve the adhesion between two phases. Also, the efficiency of essential oils as green plasticizers and natural antimicrobial agents were evaluated.Design/methodology/approachBarrier properties and biodegradation behavior of linear low density polyethylene/starch (LLDPE/starch) blends plasticized with different essential oils including moringa oleifera and castor oils wereassessed as a comparison with traditional plasticizer such as glycerol. Biodegradation behavior forLLDPE/starch blends was monitored by soil burial test. The composted samples were recovered then washed followed by drying, and weighting samples after 30, 60, and 90 days to assess the change in weight loss. Also, mechanical properties including retention values of tensile strength and elongation at break were measured before and after composting. Furthermore, scanning electron microscope (SEM) was used to evaluate the change in the morphology of the polymeric blends. In addition to, the antimicrobial activity of plasticized LLDPE/starch blends films was evaluated using a standard plate counting technique.FindingsThe results illustrate that the water vapor transition rate increases from 2.5 g m-2 24 h-1 for LLDPE/5starch to 4.21 g m-2 24 h-1 and 4.43 g m-2 24 h-1 for castor and moringa oleifera respectively. Also, the retained tensile strength values of all blends decrease gradually with increasing composting period. Unplasticized LLDPE/5starch showed highest tensile strength retention of 91.6% compared to the other blends that were 89.61, 88.49 and 86.91 for the plasticized LLDPE/5starch with glycerol, castor and M. oleifera oils respectively. As well as, the presence of essential oils in LLDPE/ starch blends increase the inhibition growth of escherichia coli, candida albicans and staphylococcus aureus.Originality/valueThe objective of this work is to develop cost-effective and environmentally-friendly methods for preparing biodegradable polymers suitable for packaging applications.

In this study, starch (ST), chitosan (CH), spider silk (SW), and their hybrid composite bioplastics were fabricated and examined for physicochemical and mechanical properties. The essential oils (EOs) of Rosmarinus officinalis were encapsulated to enhance their biological application. The prepared composite films were characterized using various spectroscopic techniques such as XRD, SEM, GCMS-, UV-VIS, TGA, and FTIR spectroscopy. The antimicrobial activity of the prepared film was tested against S. aureus bacterial and C. albican fungal strains which showed a greater zone of inhibition for the composite film encapsulated with EOs. The biodegradability of the synthesized film was evaluated for 60 days in soil under laboratory conditions. The composite film containing spider web and essential oil significantly improved mechanical properties. The physicochemical results, such as moisture, solubility, swelling, transmittance, opacity, and water vapor permeability, of the prepared bioplastic were comparable with those of the control plastic. The EO-based film had greater antioxidant activity against DPPH, hydrogen peroxide, and phosphomolybdenum assays, with an inhibition range of 60-70 %. The addition of spider web and essential oil to the chitosan/ starch film significantly increased the shelf life of injera and tomatoes for 7 and 10 days, respectively for the EO-based film. The biodegradability of the synthesized film has shown a great reduction in the weight and growth of microorganisms. In general, the CH/ST/SW and CH/ST/ SW/EOs composite films have greater mechanical, biological, physicochemical, and potential improvement of food shelf life applied as either coating or packaging material.

With a growing population of about 7.8 billion, humans are generating tons of waste in the form of non-biodegradable plastics on a daily basis that ends up in landfills and oceans. The introduction of packaging has been a blessing to mankind by facilitating the ease of convenience in transportation, delivery and general usage. The downside, however, is that majority of the packaging currently available is harmful to the environment and takes thousands of years to decay. This paper discusses the use of chitosan from shrimp shells and other marine animals' exoskeleton waste in food packaging industries. Chitosan extracted from marine organisms is modulated in the form of packaging material. Compared to conventional packaging, chitosan films are 73.4% biodegradable in soil under laboratory conditions whereas 100% degraded in an open field. Chitosan with metal oxides, essential oils, natural extracts, proteins and other polymers show enhanced tensile strength, water vapor permeability, oxygen and ultraviolet barrier. Chitosan and composite film show antimicrobial activity against gram positive and negative bacteria. Comparative approaches on environmental impacts between conventional plastics and chitosan films are enlightened, thereby highlighting the importance of natural polymers as packaging films that are considered economic based on the addition of additives.

Several slug species are voracious pests of agricultural crops in northern Europe and are difficult to control. The parasitic nematode Phasmarhabditis hermaphrodita has been developed as a slug control product, but there is little information about whether it could be combined with other control methods (such as essential oils) to enhance its efficacy. Here, we carried out experiments in propagators with lettuce at three different time periods (July, September and October), and tested the following treatments: water (untreated control), cedarwood oil, P. hermaphrodita, cedarwood oil and P. hermaphrodita, and Tween 80 (used as an emulsifier for the cedarwood oil solution). Lettuce was grown in propagators with either 10 Deroceras reticulatum or 5 Arion vulgaris and the percentage of lettuce eaten over 14 days (as well as weight, the number of live slugs and eggs produced) was recorded. Cedarwood oil reduced slug damage, slug numbers and slug eggs in the experiments with D. reticulatum, and P. hermaphrodita performed well in two out of three experiments. The mixture of P. hermaphrodita and cedarwood oil was superior in reducing the proportion of lettuce eaten compared to single doses of each treatment in one out of three trials. In propagators with A. vulgaris all treatments performed poorly. In summary, P. hermaphrodita and/or cedarwood can be used to reduce damage by D. reticulatum, but are ineffective at controlling A. vulgaris. Slugs from the genus Arion continue to be a difficult group to control.

In this study, the influence of the incorporation of eucalyptus (EO), tea tree (TT) and rosemary (RO) essential oils and Chiriyuyo extract (CE) on the structure and properties of thermoplastic starch (TPS) obtained from potato starch, glycerin and water was evaluated. All oils and the extract were used at a concentration of 0.5 g/100 g of TPS, while for TT, the effect of the concentration was also studied. The mixtures obtained were processed by extrusion and thermocompression molding. The sheets were characterized by XRD, FTIR, TGA, SEM and analyses of their mechanical properties, antimicrobial characteristics and biodegradability. The results show that the use of small concentrations of the oils in 70TPS does not induce changes in the TPS structure according to the results of XRD, FTIR and TGA, with each essential oil and CE affecting the mechanical properties unevenly, although in all cases, antimicrobial activity was obtained, and the biodegradability of TPS in soil was not modified. An increase in the concentration of TT in 60TPS causes marked changes in the crystallinity of TPS, providing a greater modulus with a higher concentration of TT. Regardless of the amount of TT, all sheets maintain antimicrobial characteristics, and their biodegradation in soil is delayed with a higher oil content.