Pectin blended with cellulose nanofiber (CNF) sourced from wood pulp has excellent potential for modified atmosphere packaging (MAP), as demonstrated with refrigerated or sliced fruits enclosed in parchment coated with pectin-CNF composites. Addition of sodium borate (NaB) augments the antioxidant capacity of the composite, most likely through the generation of unsaturated pectic acid units. Packaging materials coated with pectin-CNF-NaB composites demonstrate better humidity regulation in refrigerated spaces over a 3-week period relative to uncoated controls (50% less variation), with improved preservation of strawberries as well as a reduction in the oxidative browning of sliced apples. Pectin-CNF films are both biorenewable and biodegradable as confirmed by their extensive decomposition in soil over several weeks, establishing their potential as a sustainable MAP material. Lastly, self-standing films are mechanically robust at 80% RH with tensile strength and toughness as high as 150 MPa and 8.5 MJ/m2 respectively. These values are on par with other bioplastic composites and support the practical utility of pectin-CNF composites in functional packaging applications.

Plant fibers' wide availability and accessibility are the main causes of the growing interest in sustainable technologies. The two primary factors to consider while concentrating on composite materials are their low weight and highly specific features, as well as their environmental friendliness. Pineapple leaf fiber (PALF) stands out among natural fibers due to its rich cellulose content, cost-effectiveness, eco-friendliness, and good fiber strength. This review provides an intensive assessment of the surface treatment, extraction, characterization, modifications and progress, mechanical properties, and potential applications of PALF-based polymer composites. Classification of natural fibers, synthetic fibers, chemical composition, micro cellulose, nanocellulose, and cellulose-based polymer composite applications have been extensively reviewed and reported. Besides, the reviewed PALF can be extracted into natural fiber cellulose and lignin can be used as reinforcement for the development of polymer biocomposites with desirable properties. Furthermore, this review article is keen to study the biodegradation of natural fibers, lignocellulosic biopolymers, and biocomposites in soil and ocean environments. Through an evaluation of the existing literature, this review provides a detailed summary of PALF-based polymer composite material as suitable for various industrial applications, including energy generation, storage, conversion, and mulching films.

The development of convenient technologies for green fabrication of bio-based polymers that are mechanically tough, recyclable and completely degradable in soil is an urgent demand. Herein, plant oil-based polyesters (PUD) were cost-effectively fabricated by polymerizing diene ester monomers derived from 10-undecanoic acid under mild solvent-free conditions with a yield of 92 %, making them environmentally friendly. Due to the presence of internal reversible forces, plant oil-based polyesters can be easily processed into various shapes and products. Plant oil-based polyester films exhibited a tensile strength of 10.0 MPa, while also being highly flexible, and water-resistant. Additionally, excellent recycling performance of polyester was achieved in a closed loop by solvent-assisted or hot-pressing depolymerization/repolymerization. Moreover, microorganisms and water in soil can completely degrade plant oil-based polyesters within 15 weeks. However, the mechanical properties and thermal stability of plant oil-based polyesters are still anticipated. Therefore, the addition of acetylated cellulose nanofibers (ACNF) to plant oil-based polyester matrix has obtained the production of biodegradable composites with excellent mechanical properties, thermal stability and barrier properties. The high-performance and ecofriendly nanocomposite has the potential to facilitate the multifunctional utilization of cellulose nanofibers and practical applications of plant oils.

Air pollution is a major environmental and public health issue. Each year, large amounts of particulate matter (PM) and other harmful pollutants are released into the atmosphere. Conventional polymer nanofiber filters lack the functionality to capture ultrafine PM. As a sustainable alternative, this work developed titanium dioxide (TiO2) nanoparticle surface-modified cellulose nanofiber (CNF) aerogels for PM2.5 filtration. CNFs were extracted via mechanical disintegration to diameters below 100 nm. The nanofibers were functionalized with 1.0-2.5 wt% TiO2 nanoparticles using citric acid cross-linking. Cylindrical aerogels were fabricated by freezing and lyophilizing aqueous suspensions. Structural, morphological, thermal, and mechanical properties were characterized. TiO2 modification increased density (11.8-19.7 mg/cm3), specific surface area (287-370 m2/g), and Young's modulus (33.5-125.5 kPa) but decreased porosity (99.6 %-97.7 %), pore size (20.2-15.6 nm) and thermal stability compared to unmodified cellulose aerogels. At 2.5 wt% loading, the optimized aerogels achieved 100 % absorption of 0.1-5 mu m particulates owing to reduced pore size. Despite enhanced filtration capabilities, the modified CNF aerogels retained inherent biodegradability, degrading over 70 % within one month of soil burial. This pioneering research establishes TiO2 functionalized CNF aerogels as promising sustainable alternatives to traditional petroleum-based air filters, representing an innovative approach to creating next-generation nanofiltration materials capable of effectively capturing fine and ultrafine particulate matter pollutants.

The increasing global awareness of environmental issues has led to a growing interest in research on cellulosebased film. However, several limitations hinder their development and industrial application, such as hydrophilicity, inadequate mechanical properties and barrier properties, and a lack of activity. This study aimed to create a sustainable and hydrophobic high-performance all-green pineapple peel cellulose nanocomposite film for food packaging by incorporating natural carnauba wax and cellulose nanofibers (CNF) into a pineapple peel cellulose matrix. The results showed that adding carnauba wax to the cellulose matrix converted the surface wettability of the cellulose-based film from hydrophilic to hydrophobic (water contact angle over 100). Additionally, the film exhibited ultraviolet resistance and antioxidation properties. The incorporation of CNF further improved the barrier properties, mechanical properties, and thermal stability of the cellulose nanocomposite film. In applied experiments, the cellulose nanocomposite film delayed post-harvest deterioration and maintained storage quality of cherry tomatoes. Importantly, the cellulose nanocomposite film could be degraded in soil within 30 days. It can be concluded that the cellulose nanocomposite film has great potential to alleviate the environmental problems and human health problems caused by non-degradable petroleum-based plastic packaging.