In order to investigate the frost-heaving characteristics of wintering foundation pits in the seasonal frozen ground area, an outdoor in-situ test of wintering foundation pits was carried out to study the changing rules of horizontal frost heave forces, vertical frost heave forces, vertical displacement, and horizontal displacement of the tops of the supporting piles under the effect of groundwater and natural winterization. Based on the monitoring condition data of the in-situ test and the data, a coupled numerical model integrating hydrothermal and mechanical interactions of the foundation pit, considering the groundwater level and phase change, was established and verified by numerical simulation. The research results show that in the silty clay-sandy soil strata with water replenishment conditions and the all-silty clay strata without water replenishment conditions, the horizontal frost heave force presents a distribution feature of being larger in the middle and smaller on both sides in the early stage of overwintering. With the extension of freezing time, the horizontal frost heave force distribution of silty clay-sand strata gradually changes from the initial form to the Z shape, while the all-silty clay strata maintain the original distribution characteristics unchanged. Meanwhile, the peak point of the horizontal frost heave force in the all-silty clay stratum will gradually shift downward during the overwintering process. This phenomenon corresponds to the stage when the horizontal displacement of the pile top enters a stable and fluctuating phase. Based on the monitoring conditions of the in-situ test, a numerical model of the hydro-thermo-mechanical coupling in the overwintering foundation pit was established, considering the effects of the groundwater level and ice-water phase change. The accuracy and reliability of the model were verified by comparison with the monitoring data of the in-situ test using FLAC3D finite element analysis software. The evolution of the horizontal frost heaving force of the overwintering foundation pit and the change rule of its distribution pattern under different groundwater level conditions are revealed. This research can provide a reference for the prevention of frost heave damage and safety design of foundation pit engineering in seasonal frozen soil areas.

Expansive soil, characterized by significant swelling-shrinkage behavior, is prone to cracking under wet-dry cycles, severely compromising engineering stability. This study combines experimental and molecular dynamics (MD) simulation approaches to systematically investigate the improvement effects and micromechanisms of polyvinyl alcohol (PVA) on expansive soil. First, direct shear tests were conducted to analyze the effects of PVA content (0 %-4 %) and moisture content (30 %-50 %) on the shear strength, cohesive force, and internal friction angle of modified soil. Results show that PVA significantly enhances soil cohesive force, with optimal improvement achieved at 3 % PVA content. Second, wet-dry cycle experiments revealed that PVA effectively suppresses crack propagation by improving tensile strength and water retention. Finally, molecular dynamics simulations uncovered the distribution of PVA between montmorillonite (MMT) layers and its influence on interfacial friction behavior. The simulations demonstrated that PVA forms hydrogen bonding networks, enhancing interlayer interactions and frictional resistance. The improved mechanical performance of PVAmodified soil is attributed to both nanoscale bonding effects and macroscale structural reinforcement. This study provides theoretical insights and technical support for expansive soil stabilization.

The influence of seismic history on the liquefaction resistance of saturated sand is a complex process that remains incompletely understood. Large earthquakes often consist of foreshocks, mainshocks, and aftershocks with varying magnitudes and irregular time intervals. In this context, sandy soils undergo two interdependent processes: (i) partial excess pore water pressure (EPWP) generation during foreshocks or moderate mainshocks, where seismic loadings elevate EPWP without causing full liquefaction and (ii) incomplete EPWP dissipation between seismic events due to restricted drainage. These processes leave behind persistent residual EPWP, reducing the liquefaction resistance during subsequent shaking. A series of cyclic triaxial tests simulating these mechanisms revealed that liquefaction resistance increases when the EPWP ratio r(u) < 0.6-0.8 (peaking at r(u) similar to 0.4) but decreases sharply at higher r(u). Crucially, EPWP generation during seismic loading plays a dominant role in resistance evolution compared to reconsolidation effects. Threshold lines (TLs) mapping r(u), the reconsolidation ratio (RR), and peak resistance interval (the range of r(u) where the peak liquefaction resistance is located) indicates that resistance decreases above TLs and increases below them, with higher cyclic stress ratios (CSR) weakening these effects. These findings provide a unified framework for assessing liquefaction risks under realistic multi-stage seismic scenarios.

Large-diameter monopiles of offshore wind turbines are subjected to continuous multistage cyclic loads of different types (one-way or two-way) and loading amplitudes over time. The loading history is likely to affect the lateral response during the subsequent loading stage. This paper conducts a systematic study on the lateral response of monopiles with and without reinforcement in multilayer soil. Two groups of monotonic centrifuge tests of monopiles with and without reinforcement are carried out to compare and study the influence of reinforcement on the displacement, bending moment and earth pressure of monopile foundations. Local reinforcement in the shallow layer effectively improved the bearing capacity of the monopile foundation. The ultimate bearing capacity of monopile foundations in monotonic tests provides a load basis for cyclic tests. Four groups of continuous multistage cyclic centrifuge tests of monopiles with and without reinforcement with different cyclic modes and loading amplitudesare carried out to investigate the influence of loading history on the lateral cumulative displacement, unloading secant stiffness and bending moment. Empirical design recommendations for monopiles under continuous multistage cyclic loads with different cyclic modes and loading amplitudes are provided based on the results of the tests.

Maximizing agricultural tractor energy efficiency is crucial for sustainable farming. Tractors are one of the most popular machines in use in agriculture, and much of their use is dedicated to drawbar operations. Under these conditions, only up to 70 % of engine power is transferred to the soil, and this may even drop to 50 % on soils with poor mechanical properties. Recently, tyres which meet very high flexion standards have hit the market and to date, no study has performed a thorough full-vehicle traction analysis of vehicles equipped with such standards. This paper investigated the influence of tyres on vehicle performance and efficiency. Moreover, a cost analysis of the new tyre technology was carried out to assess the duration of use necessary for farmers to recoup the financial investment this new tyre technology requires. The analysis comprised steady-state drawbar tests on two soil types using a tractor rated at 230 kW and equipped with wheel force transducers. Key performance indicators were calculated from the collected data. Results showed superior traction on softer soil, where the mean vehicle traction ratio was 6.4 % higher than on firmer soil, highlighting tyre set performance differences. However, traction efficiency was 17.5 % greater on firmer soil. Very high flexion tyres resulted in improved indicators in both soils and despite the greater cost of tyres using the new standard, farmers may obtain economic benefits even within a year if such tyres are mostly used in field operations and on soft soils.

Soybean urease-induced calcium carbonate precipitation (SICP) is an innovative and eco-friendly approach with demonstrated potential for mitigating soil liquefaction. However, the specific impacts of the concentrations of soybean urease and salt solutions require further elucidation. The research examines how the two compositions influence calcium carbonate formation. Dynamic characteristics of one-cycle SICP-treated clean and silty sand were analyzed based on cyclic triaxial tests. It was revealed that SICP-treated specimens of both liquefied sand and silty sand exhibit reduced accumulation of excess pore pressure and diminished strain growth under cyclic loading, thereby delaying liquefaction failure. Although higher concentrations of both soybean urease and salt solution can enhance liquefaction resistance, salt solution concentration has a more pronounced effect on improving liquefaction resistance due to the more production of calcium carbonate. Scanning electron microscopy observations confirmed the presence of calcium carbonate crystals at the interfaces between sand particles and between sand and fine particles. These crystals effectively bond the loose sand and fine particles into a cohesive matrix, reinforcing soil structure. A direct linear correlation was established between the liquefaction resistance improvement and precipitated calcium carbonate content. Notably, the one-cycle SICP treatment method adopted in this study demonstrates a better biocementation effect compared to cement mortar or multi-cycle MICP-treated sand under the same content of cementitious materials. These findings provide valuable insights for optimizing SICP treatments, aiming to reduce the risk of soil liquefaction in potential field applications.

Self-boring pressuremeter (SBPM) tests are widely used in situ investigations, due to their distinct advantage to measure the shear stress-strain-strength properties of the surrounding soil with minimum disturbance. The measured pressuremeter curve can be interpreted using analytical solutions based on the long cylindrical cavity expansion/contraction theory with relatively simple constitutive models, to derive useful soil properties (e.g., undrained shear strength of clay, shear modulus, and friction angle of sand). However, the real soil behavior is more complex than the assumed constitutive relations, and the derived parameters may differ from those obtained using more reliable lab tests. In addition, SBPM tests can be affected by other well-known factors (e.g., installation disturbance, limited length/diameter ratio, and strain rate) that are not considered in the analytical solutions. In this paper, SBPM tests are evaluated using finite-element analysis and the MIT-S1 model, a unified constitutive model for soils, to consider complex soil behavior more realistically. SBPM tests in Boston Blue Clay and Toyoura sands are simulated in axial symmetric and plain strain conditions, and the computed results are interpreted following the suggested procedures by analytical solutions. The derived parameters are compared with those from the stress-strain relations to evaluate the reliability of SBMP tests for practical application.

Transversely isotropic rocks (TIRs) are widespread in geological formations, and understanding their mechanical behavior is crucial for geotechnical and geoengineering applications. This study presents the development of a novel analog material that reproduces the directional mechanical properties of TIRs. The material is composed of quartz sand, mica flakes, and gelatin in adjustable proportions, allowing control over strength and stiffness anisotropy. Uniaxial compressive strength (UCS) and direct shear tests were conducted to evaluate mechanical responses across different anisotropy angles. Results show that the analog material replicates key features of natural TIRs, including directional variations in strength and fracture modes. In UCS tests, the anisotropy angle (beta) governs the transition between tensile and shear failure. In direct shear tests, the orientation angle (alpha) significantly affects shear strength. Higher gelatin concentrations increase cohesion and Young's modulus without changing the internal friction angle, while mica content reduces overall strength and stiffness. Comparisons with published data on sedimentary and metamorphic rocks confirm the mechanical representativeness of the material. Its simplicity, tunability, and reproducibility make it a useful tool for scaled physical modeling of anisotropic rock behavior in the laboratory. This approach supports the experimental investigation of deformation and failure mechanisms in layered rock masses under controlled conditions.

This study investigates the influence of wood pellet fly ash blended binder (WABB) on the mechanical properties of typical weathered granite soils (WS) under a field and laboratory tests. WABB, composed of 50 % wood pellet fly ash (WA), 30 % ground granulated blast furnace slag (GGBS), and 20% cement by dry mass, was applied at dosages of 200-400 kg/m3 to four soil columns were constructed at a field site deposited with WS. After 28 days, field tests, including coring, standard penetration tests (SPT), and permeability tests, revealed enhanced soil cementation and reduced permeability, indicating a denser soil matrix. Unconfined compressive tests (UCT) and free-free resonant column (FFRC) tests on field cores at 28 and 56 days, compared with laboratory specimens and previously published data, demonstrated strength gains 1.2-2.1 times higher due to field-induced stress. The presence of clay minerals influenced the WABB's interaction and microstructure development. Correlations between seismic waves, small-strain moduli, and strength were developed to monitor in-situ static and dynamic stiffness gain of WABB-stabilized weathered granite soils.

Climate change increases the frequency of extreme weather events, intensifying shallow flow-type landslides, soil erosion in mountainous regions, and slope failures in coastal areas. Vegetation and biopolymers are explored for ecological slope protection; however, these approaches often face limitations such as extended growth cycles and inconsistent reinforcement. This study investigates the potential of filamentous fungi and wheat bran for stabilizing loose sand. Triaxial shear tests, disintegration tests, and leachate analyses are conducted to evaluate the mechanical performance, durability, and environmental safety of fungus-treated sand. Results show that the mycelium enhances soil strength, reduces deformation, and lowers excess pore water pressure, with a more pronounced effect under undrained than drained conditions. Mycelium adheres to particle surfaces, forming a durable bond that increases cohesion and shifts the slope of the critical state line, significantly enhancing the mechanical stability of fungus-treated sand. The resulting strength parameters are comparable to those of soils reinforced with plant roots. Fungus-treated sand remains stable after 14 days of water immersion following triaxial shear tests, with no environmental risk from leachate. These findings demonstrated that fungal mycelium provides an effective and eco-friendly solution for stabilizing loose sand, mitigating shallow landslides, and reinforcing coastlines.