Lime-activated ground granulated blast furnace slag (GGBS) is usually used to treat gypseous soils. However, sulphate-bearing soils often contain other sulphates, e.g., sodium sulphate (Na2SO4), potassium sulphate (K2SO4) and magnesium sulphate (MgSO4). Therefore, in this study, lime-GGBS was used as a curing agent for stabilising four sulphate-bearing soils, which were named as Na-soil, K-soil, Mg-soil, and Ca-soil. Unconfined compressive strength (UCS), swelling, X-ray diffraction, scanning electron microscopy and inductively coupled plasma spectroscopy tests, were conducted to explore the macro- and micro-properties of the lime-GGBS-stabilised soils. The results showed that at 5000 ppm sulphate, stabilised Mg-soil had the lowest swelling and highest UCS. At 20,000 ppm sulphate, stabilised Ca-soil had the lowest swelling, while stabilised Na-soil had the highest UCS. Generally, increasing sulphate concentration decreased swelling for Ca-soil but increased for other three soils, and decreased UCS for Mg-soil but increased for other three soils. This was because less ettringite was generated in the stabilised Ca-soil and the formation of magnesium silicate hydrate (MSH) in the stabilised Mg-soil. Therefore, the sulphate type had a significant impact on the swelling and strength properties of lime-GGBS-stabilised sulphate-bearing soil. It is essential to identify the sulphate type before stabilising the soil on-site.