This research explores the stabilization of clay soil through the application of geopolymer binder derived from silicomanganese slag (SiMnS) and activated by sodium hydroxide (NaOH). This research aims to evaluate the effects of key parameters, including the percentage of slag, the activator-to-stabilizer ratio, and curing conditions (time and temperature), on the mechanical properties of the stabilized soil. Unconfined compressive strength (UCS) tests were conducted to assess improvements in soil strength, while scanning electron microscopy (SEM) was employed to analyze the microstructural changes and stabilization mechanisms. The results demonstrated that clay soil stabilized with SiMnS-based geopolymers exhibited significant strength enhancement. Specifically, the sample stabilized with 20% SiMnS and an activator-to-slag ratio of 1.6, cured at room temperature for 90 days, achieved a UCS of 27.03 kg & frasl;cm2. The uniaxial strength was found to be positively correlated with the SiMnS content, activator ratio, curing time, and temperature. Additionally, the strain at failure remained below 1.5% for all samples, indicating a marked improvement in soil stiffness. SEM analysis revealed that geopolymerization led to the formation of a dense matrix, enhancing soil particle bonding and overall durability. These results emphasize the potential of SiMnS-based geopolymers as a sustainable and effective soil stabilizer for geotechnical applications.

This investigation examines the development of titanium slag-flue gas desulfurized gypsum-Portland cement ternary composites (the ternary composites) for the solidification and stabilization of Pb-contaminated soils. The efficacy of the ternary composites is systematically evaluated using a combination of experimental methodologies, including mechanical properties such as unconfined compressive strength, stress-strain behavior and elastic modulus, leaching toxicity, XRD, TG-DTG, FTIR, XPS, and SEM-EDS analyses. The results indicate that the mechanical properties of Portland cement solidified Pb-contaminated soils are inferior to those of Portland cement solidified Pb-free soil, both in the early and later stages. However, the mechanical properties of Pbcontaminated soils solidified by the ternary composites are superior to those of the ternary composites solidified Pb-free soils in the early stage but somewhat inferior in the later stage. The ternary composites significantly decrease the leached Pb concentrations of solidified Pb-contaminated soils, which somewhat increase with the Pb content and with the pH value decrease of the leaching agent. Moreover, with much lower carbon emissions index and strength normalized cost, the ternary composites have comparable stabilization effects on Pbcontaminated soils to Portland cement, suggesting that the ternary composites can serve as a viable alternative for the effective treatment of Pb-contaminated soils. Characterization via TG-DTG and XRD reveals that the primary hydration products of the ternary composite solidified Pb-contaminated soils include gypsum, ettringite, and calcite. Furthermore, FTIR, XPS and SEM-EDS analyses demonstrate that Pb ions are effectively adsorbed onto these hydration products and soil particles.

This study developed a novel geopolymer (RM-SGP) using industrial solid wastes red mud and slag activated by sodium silicate, aiming to remediate composite heavy metal contaminated soil. The effects of aluminosilicate component dosage, alkali equivalent, and heavy metal concentration on the unconfined compressive strength (UCS), toxicity leaching characteristics, resistivity, pH, and electrical conductivity (EC) of RM-SGP solidified composite heavy metal contaminated soil were systematically investigated. Additionally, the chemical composition and microstructural characteristics of solidified soil were analyzed using XRD, FTIR, SEM, and NMR tests to elucidate the solidification mechanisms. The results demonstrated that RM-SGP exhibited excellent solidification efficacy for composite heavy metal contaminated soil. Optimal performance occurred at 15 % aluminosilicate component dosage and 16 % alkali equivalent, achieving UCS >350 kPa and compliant heavy metal leaching (excluding Cd in high-concentration groups). Acid/alkaline leaching tests revealed distinct metal behaviors: Cu/Cd decreased progressively, while Pb initially declined then rebounded. Microstructural analysis indicated that RM-SGP generated abundant hydration products (e.g., C-A-S-H, N-A-S-H gels), which acted as cementitious substances wrapping soil particles and filling and connecting pores, thereby increasing the soil's compactness and improving the solidification effect. Furthermore, heavy metal ions were solidified through adsorption, encapsulation, precipitation, ion exchange, and covalent bond et al., transforming their active states into less bioavailable forms, proving novel insights into the remediation of composite heavy metal contaminated soils and the resource utilization of industrial solid wastes.

In this study, carbide slag, fly ash, cement, and sodium sulfate were used to stabilize silt from the Yellow River Alluvial Plain. An orthogonal test was conducted to evaluate the optimal mix design for soil stabilization. The mechanical properties, hydration products, and microstructure of the stabilized silt were examined. The effects of stabilizer concentration, compaction, and moisture content on the mechanical properties were investigated. Based on mechanical performance, the optimal stabilizer mix was found to consist of 30% cement, 13.6% carbide slag, 54.4% fly ash, and 2% sodium sulfate. The results indicated that the California Bearing Ratio (CBR), unconfined compressive strength, and splitting tensile strength of the stabilized silt increased with higher stabilizer dosage and compaction degree. In the early stages, the hydration products of the stabilized silt were primarily calcium hydroxide, ettringite, and C-S-H, which exhibited a loose structure. Over time, the microstructure densified, and more crystalline C-S-H was formed. This study provides valuable insights into the use of industrial by-products for soil stabilization, offering a sustainable and cost-effective solution to improve the strength and stability of silt in construction projects.

A novel iron-based phosphate cement (IPC), derived from iron-rich smelting slag (ISS), was developed as a sustainable and efficient binder for the stabilization/solidification of trivalent chromium (Cr3+). The mechanical properties, hydration behavior, microstructure, leaching toxicity, chromium chemical forms, and environmental safety of chromium-stabilized iron phosphate cement (CIPC) were thoroughly evaluated. The results showed that, with a mass ratio of ISS to ammonium dihydrogen phosphate (ADP) of 2.0, and even with the addition of 20 % chromium nitrate nonahydrate (CN), the compressive strength of CIPC reached 4.2 MPa after curing for 28 d. Furthermore, chromium leaching was well below 1 mg/L, significantly lower than the GB 5085.3-2007 standard limit of 15 mg/L, demonstrating the effective encapsulation of Cr3+ due to IPC's high early strength. In the IPC system, Cr3+ was primarily stabilized by forming CrPO4 and CrxFe1-x(OH)3 co-precipitates, which were further solidified through the physical encapsulation of IPC hydration products, such as (NH4)2Fe(PO3OH)2 center dot 4H2O, (NH4) (Mg,Ca)PO4 center dot H2O, and FePO4. This process resulted in a solidification efficiency of up to 99 %. BCR analysis confirmed that more than 98 % of the chromium in the CIPC remained in a stable residual form. Finally, the ecological risk index (PERT) was found to be 23.52, far below the safety threshold of 150, indicating the solidified material's long-term environmental safety. This study provides an innovative approach for the reutilization of ISS while effectively stabilizing/solidifying chromium.

With the increasing utilization of underground space, engineering muck has become a potential urban risk. This study employed a waste-to-waste strategy to promote its low-carbon recycling by using rice husk ash (RHA) as a stabilizer, with a focus on elucidating the stabilization mechanisms through multi-scale analysis. The results showed that RHA synergized with cement, enhancing unconfined compressive strength and water stability, while reducing the specific surface area and swelling potential of the engineering muck. The optimal RHA dosage was found to be between 4 % and 6 %, with cement content ranging from 3 % to 9 %. The multi-scale analysis demonstrated that the stabilization mechanisms of RHA-cement stabilized soil were governed by two main factors: structural enhancement and surface modification, both of which were driven by the promotion of novel hydration products through the incorporation of RHA. Specifically, the needle-like and columnar minerals effectively filled soil pores, forming a dense, robust skeletal structure that enhanced the mechanical properties of the stabilized soil. Meanwhile, the honeycomb-like C-S-H gel adhered to soil particle surfaces, repairing cracks and reinforcing interparticle bonding, thus improving the overall structural integrity. AFM analysis further revealed that the honeycomb-like C-S-H gel consisted of rod-like nanoparticles that were regularly arranged on the soil surface. This feature increased surface roughness, reduced fractal dimensions, and created a multi-scale structure of micro-papillae and nano-hairs with a lotus leaf effect, significantly enhancing the hydrophobic properties of the soil.

Due to the detrimental ecological impacts and the exorbitant expenses associated with the cement industry, researchers have sought to find natural, sustainable, low-carbon alternatives to Portland cement for weak soil stabilization. This research used geopolymer based on metakaolin (MK), a natural pozzolanic material with different activator concentrations (NaOH and Na2SiO3), to stabilize loose poorly graded sand soils. The research investigated the effect of different amounts of addition MK (5, 10, and 15 %) on the soil's mechanical properties. Furthermore, the effect of parameters such as the type and concentration of the alkaline solution and curing time (1, 3, and 7 days) on the unconfined compressive strength, failure strain, Young's modulus, California bearing ratio, and direct shear test were evaluated. This research also aims to measure the sub- grade reaction modulus (Ks) by developing and manufacturing a laboratory testing apparatus and steel mold to simulate the natural conditions of sandy subgrade soil obtained from performing nonrepetitive static plate load tests. Additionally, scanning electron microscopy images (SEM) and X-ray diffraction analysis (XRD) were also used to study the microstructural changes and the chemical composition of the stabilized soil samples. The results indicate that the soil samples that were stabilized with MK 10 % and NaOH had notably higher compressive strength (2936 kPa), indicating a denser and less porous structure (improved stiffness stabilized soil) in comparison to the soil samples stabilized with MK 10 % and Na2SiO3 which was (447 kPa). Ultimately, Microstructural analysis showed that, due to the addition of 10 % MK, stabilized soils have a denser and more homogeneous structure.

The increasing production of waste glass fiber reinforced polymer (GFRP) is causing severe environmental pollution, highlighting the need for an effective treatment method. This study explores recycling waste GFRP powder to substitute ground granulated blast furnace slag (GGBS) in synthesizing geopolymers, aiming to rapidly stabilize clayey soil. The impact of GFRP powder replacement, alkali solution concentration, alkaline activator/precursor (A/P) ratio, and binder content on the geomechanical properties and permeability of stabilized soil was thoroughly examined. The findings revealed that replacing GFRP powder from 20 wt% to 40 wt% lowered the unconfined compressive strength (UCS). However, soil stabilized with 30 wt% GFRP powder displayed the highest shear strength. This indicates that the incorporation of an appropriate amount of GFRP powder elevates clay cohesion. Furthermore, an increase in GFRP powder replacement improved permeability coefficient in the early stages, with minimal impact observed after 28 days. Scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) analysis revealed a microstructural evolution of the stabilized soil, transitioning from a porous to a denser, more homogeneous composition over the curing period, which can be attributed to the formation of cluster gels enveloping the soil particles. Life cycle assessment (LCA) analysis indicated that the GFRP powder/GGBS geopolymer presents an alternative option to traditional Ordinary Portland Cement (OPC) binder, featuring a global warming potential (GWP)/strength ratio reduction of 6 %-40 %. This research offers a practical solution for effectively utilizing GFRP waste in a sustainable manner, with minimal energy consumption and pollution, thereby contributing to the sustainable development of soil stabilization.

Soft clay soils inherently exhibit low mechanical strength, imposing significant challenges for various engineering applications. The present research explores various techniques and stabilizers to enhance soft clay's suitability for construction purposes. This study evaluates the mechanism of stabilizing kaolin using recycled macro-synthetic fibers (RMSF) for the first time. Samples were prepared with 5 % LKD, with 25 % replaced by VA, and varying RMSF amounts of 0, 0.5 %, 1 %, and 1.5 % in lengths ranging from 4 to 6 mm. The specimens were cured for 7, 28, and 56 days and exposed to 0, 1, 4, and 10 freeze-thaw (F-T) cycles. Laboratory investigations were conducted through standard compaction, Unconfined Compressive Strength (UCS), Indirect Tensile Strength (ITS), Scanning Electron Microscope (SEM), California Bearing Ratio (CBR), X-ray diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FTIR) tests on the samples at various stages of stabilizer addition, both before and after F-T cycles. The optimal mixture was 5 % LKD, with 25 % VA replacement and 1 % RMSF, which led to a considerable 11-fold enhancement in ITS and a 14-fold improvement in UCS compared to the untreated sample. Additionally, the secant modulus (E50) and energy absorption capacity (Eu) of the sample with the optimal combination content increased in comparison to the stabilized sample without RMSF. The CBR of the optimal sample reached 81 %, allowing for an 87 % reduction in pavement thickness compared to the untreated sample. According to the findings of this research, the combination of LKD, VA, and RMSF increased the compressive and tensile strength properties, bearing capacity, and durability of kaolin, making it an appropriate option for use in various practical civil projects like road construction.

Eco-friendly materials have gained significant attention for soil stabilization and reinforcement in road construction and geo-environmental infrastructure, as traditional additives pose notable environmental concerns. In this study, three concentrations of Chitosan Biopolymer (CBP) (1.5 %, 3 %, and 4.5 %) as a bio-stabilizer, three proportions of Rice Husk Biochar (RHB) (0.5 %, 1 %, and 1.5 %) as a waste-derived filler, and three dosages of Hemp Fiber (HF) (0.2 %, 0.4 %, and 0.6 %) as reinforcement were used to treat sand-kaolinite mixtures (SKM). The samples were cured for 1, 7, 14, 21, and 28 days and subjected to varying numbers of freeze-thaw (F-T) cycles. A diverse range macro-scale laboratory tests, encompassing compaction, unconfined compressive strength (UCS), indirect tensile strength (ITS), F-T durability, ultrasonic pulse velocity (UPV), and thermal conductivity (TC), were performed on the treated samples. In addition, microstructural analyses using X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR) were conducted to correlate mechanical behavior with micro- scale properties. The optimal dosages of CBP and RHB were first determined through UCS tests, with 3 % CBP and 1 % RHB proving the most effective. These dosages were then used to analyze their impact on other mechanical properties. Results showed that the compressive and tensile strengths of the bio-stabilized soil at the optimum contents of additives increased by 2410.7 kPa and 201.2 %, respectively, compared to the control samples. Incorporating HF into the SKM-CBP-RHB mixtures significantly enhanced their F-T durability after 10 consecutive cycles, reducing strength deterioration and performance degradation compared to the untreated soil. The optimum composition (3 % CBP, 1 % RHB, and 0.4 % HF) led to a 6.1-fold increase in ITS and a minor 2 % reduction in performance after 10 F-T cycles. Moreover, HF incorporation improved the failure strain and reduced the brittleness of the stabilized soil. UPV and TC tests revealed that incorporating HF at levels up to 0.4 %, combined with the optimum CBP-RHB mixture, enhanced soil stiffness by 963.7 MPa and reduced thermal conductivity by 0.76 W & sdot;m-1 & sdot;K-1. The microstructural analysis confirmed these findings, showing enhanced interlocking between SKM and fibers via hydrogel formation. Overall, the study demonstrates that the CBP-RHB-HF composite markedly enhances soil strength and durability, making these additives highly suitable for applications like landfills, embankments, and slopes.