The effective dynamic viscosity of a soil-rock mixture (S-RM) serves as a essential parameter for simulating flowlike landslides in the context of fluid kinematics. Accurate measurement of this viscosity is significant for understanding the remote sustainability and rheological properties of landslide hazards. This study presents a method for determining dynamic viscosity, incorporating experimental measurements and numerical inversion. The experiment involves monitoring the movement of S-RMs with varying water content and rock block concentration, followed by the calculation of centroid displacements and velocities using digital image processing. The power-law model, combined with computational fluid dynamics, effectively captures the flow-like behavior of the S-RM. A grid search method is then employed to determine the optimal parameters by comparing the predicted centroid displacement with experimental results. A series of flume experiments were conducted, resulting in the observation of spatial mass distribution and centroid displacement variations over time during soil-rock movement. The dynamic viscosity model of the S-RM is derived from the experimental data. This dynamic viscosity model was then employed to simulate an additional flume experiment, with the results demonstrating excellent agreement between the simulated and experimental centroid displacements. Sensitivity analysis of the dynamic viscosity model indicates a dependence on shear rate and demonstrates a high sensitivity to water content and rock block concentration, following a parabolic trend within the measured range. This research contributes to the fields of geotechnical engineering and landslide risk assessment, offering a practical and effective method of measuring the dynamic viscosity of S-RM. Future research could explore additional factors influencing rheological behavior and extend the applicability of the proposed method to different geological environments.