Centrifuge tests were performed to study the dynamic properties of shallow soil with locally raised bedrock (i.e. variable soil depth). The test parameter was the slope of bedrock: 0 degrees (S0), 35 degrees (S35), and 45 degrees (S45). In each test, accelerations were measured along the soil depth, and the results of acceleration, displacement, Fourier transform, and response spectrum were compared. Based on the results, the transfer function (TF), the ratio of response spectrum (RRS), and the site period were estimated. The ground motion and site period of specimens with raised bedrock were smaller than those of the specimen without raised bedrock (i.e. with deeper soil). Further, parametric studies using 2-dimensional finite element (FE) analysis were performed to investigate the effect of design parameters on the response of shallow soil with variable soil depths. For design parameters, the length of raised bedrock and the length of foundation slab were considered. Parametric study results indicated that when the shallow soil region is wide, the results are similar to those of a 1-dimensional soil column. However, when the shallow soil region is narrow, the 2-dimensional response is smaller than the 1-dimensional soil column response. This was also observed in the actual site model.
Seismic Site Characterization involves the qualitative assessment of top-soil properties that have the capability of amplifying the generated earthquake ground motions. The geotechnical properties of topsoil refer to the top 30m subsurface profile which plays a vital role in seismic microzonation and Ground Response Analysis (GRA) studies. Among various geotechnical parameters, shear-wave velocity (Vs) of the top 30 m subsurface is mainly linked to seismic site characterization and amplification studies. The average shear-wave velocity of the top 30 m subsurface, Vs(30), has been used for seismic site classification in accordance with the National Earthquake Hazard Reduction Program (NEHRP) and various building codes. In this study, an attempt has been made to retrieve the geospatial variation of average shear-wave velocity for Coimbatore city using the active Multichannel Analysis of Surface Waves (MASW) test which is one of the non-destructive geophysical tests. To retrieve the spatial distribution of shear-wave velocity (Vs), the test was carried out at 35 locations in the vicinity of important structures, schools, colleges, and hospitals within the city. The seismic records have been acquired in the field and analyzed using the winMASW software. From the one-dimensional MASW test, the study area has an average Vs(30) in the range of 640 m/s to 909 m/s and has been classified as site-class BC (soft rock) according to NEHRP standards. These test results have been validated using the collected SPT bore log data from various locations, including 40 sites in the vicinity of the conducted MASW tests. The site-specific correlation between the shear-wave velocity (Vs) and the corrected SPT N- Value, N1(60), and between Vs and shear modulus (G) have been developed for Coimbatore city with a regression coefficient of 0.79 and 0.83 respectively. From the fundamental site period map, the study area has a site period in the range of 0.1 to 0.2 s, which indicates that 1to 2- storey buildings that are densely distributed throughout the city may lead to damage in case of probable future earthquakes. This study bridges the connectivity from the evaluated bedrock acceleration using the Seismic Hazard Analysis (SHA) and provides insights for evaluating surface acceleration using GRA studies.
For the earthquake design of underground and basement structures, soil displacement needs to be predicted. In the present study, simplified methods for the prediction of soil period, damping ratio, and soil displacement profile were studied. First, existing methods for the estimation of site periods (in the elastic range) were applied to 440 actual soil profiles, and accuracy was evaluated by comparing the predictions with the site periods calculated by the wave propagation theory. The result showed that the simplified Rayleigh method and eigenvalue analysis showed better predictions. Then, modification coefficients for the inelastic site period and equivalent damping ratio (i.e., the effect of inelastic soil properties) were proposed based on the results of an equivalent linear site response analysis (SRA). Finally, a simplified method for the prediction of soil displacement profile was proposed. The proposed method was applied to 440 soil profiles, and the predicted soil displacement profiles agreed with the SRA results.