In aggressive environments, including acidic environments, low and high-plasticity clays play an important role in transmitting and spreading dangerous pollution. Stabilisation of these types of soils can improve their characteristics. In this research, different ratios of two precursors with a low calcium percentage, for example, waste statiti-ceramic sphere powder (WS-CSP) and a high calcium percentage (e.g. ground granulated blast furnace slag [GGBFS], were employed to investigate the properties of soils with different plasticity indices [PIs]). Low and high-plasticity-stabilised and stabilised with 5 wt% Portland cement specimens were prepared and exposed to an acidic solution with a pH of 2.5 in intervals of 1, 3, 6 and 9 months. The long-term durability of specimens was evaluated using the uniaxial compressive strength test (UCS) and bending strength test (BS). Additionally, the microstructures of these specimens under various time intervals were analyzed using scanning electron microscopy and Fourier-transform infrared. According to the results, in an acidic environment, the reduction in UCS, BS, toughness and secant modulus of elasticity (E50) for low-plasticity-stabilised specimens and containing 100% WS-CSP was lower than that of other specimens. The Taguchi method and ANOVA were used to investigate the effect of each control factor on the UCS and BS.

High plasticity clay soils have low bearing and high swelling potential, which can lead to major problems if used in embankment layers. In current study, recycled concrete aggregates (RCA) were used as the most important part of construction and demolition (C&D) wastes in order to reduce the swelling potential and improve the mechanical strenght of high plasticity clay soil, and to achieve these goals, granulated blast furnace slag (GBS) was used as chemical additive. A set of laboratory tests including standard proctor, unconfined compression strength (UCS) and CBR tests were conducted to investigate the mechanical properties of the treated soil. Laboratory observations showed that by adding of RCA wastes to high plasticity clay, the UCS value increased up to 20% RCA content and then decreased with further RCA. Also, adding GBS and prolonged curing time improves the UCS of the clay - RCA mixture, and addition of 9% GBS can be suggested as the optimal content to achieve the design criteria of the subbase and subgrade layers. The use of RCA improves the secant modulus of elasticity (E50) and reduces the deformability index (DI), and these parameters are improved more significantly in the presence of GBS additive.