Liquefaction hazard analysis is crucial in earthquake-prone regions as it magnifies structural damage. In this study, standard penetration test (SPT) and shear wave velocity (Vs) data of Chittagong City have been used to assess the liquefaction resistance of soils using artificial neural network (ANN). For a scenario of 7.5 magnitude (Mw) earthquake in Chittagong City, estimating the liquefaction-resistance involves utilizing peak horizontal ground acceleration (PGA) values of 0.15 and 0.28 g. Then, liquefaction potential index (LPI) is determined to assess the severity of liquefaction. In most boreholes, the LPI values are generally higher, with slightly elevated values in SPT data compared to Vs data. The current study suggests that the Valley Alluvium, Beach and Dune Sand may experience extreme liquefaction with LPI values ranges from 9.55 to 55.03 and 0 to 37.17 for SPT and Vs respectively, under a PGA of 0.15 g. Furthermore, LPI values ranges from 25.55 to 71.45 and 9.55 to 54.39 for SPT and Vs correspondingly. The liquefaction hazard map can be utilized to protect public safety, infrastructure, and to create a more resilient Chittagong City.

Human disturbance in the Arctic is increasing. Abrupt changes in vegetation may be expected, especially when spots without vegetation are made available; additionally, climate change alters competition between species. We studied whether 34- to 35-year-old seismic operations had left imprints on local vegetation and whether changes could be related to different soil characteristics. The study took place in Jameson Land in central east Greenland where winter seismic operations in search of oil took place from 1985 to 1989. This area is dominated by continuous dwarf shrub heath with Cassiope tetragona, Betula nana, and Vaccinium uliginosum as dominant species. Using point frame analyses, we registered vascular plants and other surface types in frames along 10-m transects in vehicle tracks (hereafter damages) and in undisturbed vegetation parallel to the track (hereafter references) at eleven study sites. We also measured temperature and pH and took soil samples for analysis. Damaged and reference vegetation types were compared with S & oslash;rensen similarity indices and detrended correspondence analyses. Although most vascular plant species were equally present in damaged vegetation and in references the detrended correspondence analyses showed that at ten out of eleven study sites the damages and references still differed from each other. Graminoids and the herb Polygonum viviparum had the highest occurrence in damages. Shrubs and the graminoid Kobresia myosuroides had the highest occurrence in references. Cassiope tetragona was negatively impacted where vehicles had compacted the snow. Moss, organic crust or biocrust, soil, and sand occurred more often in damages than in references, whereas lichens and litter had the highest occurrence in references. The richness of vascular plant species varied between the eleven study sites, but between damages and references the difference was only up to four species. Temperature was the soil parameter with the most significant differences between damages and references. Total recovery of the damaged vegetation will most likely not occur within several decades. The environmental regulations were important to avoid more serious impacts.

Correlations between the mechanical properties and surface scratch resistance of polylactic acid (PLA) are investigated via tensile and scratch tests on samples after degradation in soil for various times. The results show that the tensile yield strength of PLA is inversely proportional to the natural logarithm of the degradation time, and the scratch resistance and fracture toughness of PLA and the temperature rise near the indenter all increase and then decrease. The surface crystallinity of PLA also increases and then decreases, indicating that it and the scratch resistance are closely related. These findings provide useful information about how PLA behaves under degradation conditions. (c) 2025 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC) license (https://creativecommons.org/licenses/by-nc/4.0/).

To investigate the effect of interface temperature on the soil-reinforcement interaction mechanism, a series of pullout tests were conducted considering different types of reinforcement (geogrid and non-woven geotextile), backfill (dry sand, wet sand, and clay), and six interface temperatures. The test results indicate that at interface temperatures of 0 degrees C and above, reinforcement failure didn't occur during the pullout tests, whereas it predominantly occurred at subzero temperatures. Besides, the pullout resistance for the same soil-reinforcement interface gradually decreased as the interface temperature rose. At a given positive interface temperature, the pullout resistance between wet sand and reinforcement was significantly higher than that of the clayreinforcement interface but lower than that of the dry sand-reinforcement interface. Compared with geotextile reinforcements, geogrids were more difficult to pull out under the same interface temperature and backfill conditions. In addition, the lag effect in the transfer of tensile forces within the reinforcements was significantly influenced by the type of soil-reinforcement interface and the interface temperature. Finally, the progressive deformation mechanism along the reinforcement length at different interface temperatures was analyzed based on the strain distribution in the reinforcement.

The soil strength of soft clay is influenced by strain rate effect. Models considering strain rate effect always ignore the impact of loading rate on pore pressure and have poor applicability to 3D engineering problems. Based on the classic inelastic core boundary surface model, a logarithmic rate function representing the strain rate effect of soft soil was introduced to the hardening law. A new parameter H was added to adjust the plastic modulus while another new parameter mu is introduced to account for the strain rate effect. A rate-effect boundary surface constitutive model suitable for saturated clay was subsequently proposed. Combined with the implicit integral numerical algorithm and stress-permeability coupling analysis, the innovative model was implemented in the finite element software and validated by comparing with the results of triaxial tests. By analysing the rate-effect of 11 types of soft soil, a formula to calculate the rate parameter was derived. The developed model was used to calculate the undrained vertical bearing capacity and sliding resistance of a movable subsea mudmat. The mudmat frictional coefficient from soil undrained to partial drained and finally undrained state was obtained and compared with those from the Modified Cam-Clay model. Identical results were obtained without considering the rate effect. When considering the strain rate effect on the improvement of soil strength, the friction resistance coefficient initially decreases and then increases with the decrease of the sliding speed, eventually stabilising after reaching the limit value. The rate-effect on the friction resistance coefficient is most prominent under undrained conditions with high sliding speeds. The soil strain rate effect is suggested to be considered in the design of the subsea mudmat avoid underestimating the friction resistance.

Ensuring the accuracy of free-field inversion is crucial in determining seismic excitation for soil-structure interaction (SSI) systems. Due to the spherical and cylindrical diffusion properties of body waves and surface waves, the near-fault zone presents distinct free-field responses compared to the far-fault zone. Consequently, existing far-fault free-field inversion techniques are insufficient for providing accurate seismic excitation for SSI systems within the near-fault zone. To address this limitation, a tailored near-fault free-field inversion method based on a multi-objective optimization algorithm is proposed in this study. The proposed method establishes an inversion framework for both spherical body waves and cylindrical surface waves and then transforms the overdetermined problem in inversion process into an optimization problem. Within the multi-objective optimization model, objective functions are formulated by minimizing the three-component waveform differences between the observation point and the delayed reference point. Additionally, constraint conditions are determined based on the attenuation property of propagating seismic waves. The accuracy of the proposed method is then verified through near-fault wave motion characteristics and validated against real downhole recordings. Finally, the application of the proposed method is investigated, with emphasis on examining the impulsive property of underground motions and analyzing the seismic responses of SSI systems. The results show that the proposed method refines the theoretical framework of near-fault inversion and accurately restores the free-field characteristics, particularly the impulsive features of near-fault motions, thereby providing reliable excitation for seismic response assessments of SSI systems.

The cyclic behavior of clay significantly influences the dynamic response of offshore wind turbines (OWTs). This study presents a practical bounding surface model capable of describing both cyclic shakedown and cyclic degradation. The model is characterized by a simple theoretical framework and a limited number of parameters, and it has been numerically implemented in ABAQUS through a user-defined material (UMAT) subroutine. The yield surface remains fixed at the origin with isotropic hardening, while a movable projection center is introduced to capture cyclic hysteresis behavior. Cumulative plastic deviatoric strain is integrated into the plastic modulus to represent cyclic accumulation. Validation against undrained cyclic tests on three types of clay demonstrates its capability in reproducing stress-strain hysteresis, cyclic shakedown, and cyclic degradation. Additionally, its effectiveness in solving finite element boundary value problems is verified through centrifuge tests on large-diameter monopiles. Furthermore, the model is adopted to analyze the dynamic response of monopile OWTs under seismic loading. The results indicate that, compared to cyclic shakedown, cyclic degradation leads to a progressive reduction in soil stiffness, which diminishes acceleration amplification, increases settlement accumulation, and results in higher residual excess pore pressure with greater fluctuation. Despite its advantages, this model requires a priori specification of the sign of the plastic modulus parameter cd to capture either cyclic degradation or shakedown behavior. Furthermore, under undrained conditions, the model leads pstabilization of the effective stress path, which subsequently results in underestimation of the excess pore pressure.

Seismic safety of high concrete face rockfill dams (CFRD) on thick layered deposit is crucial. This study develops a seismic performance assessment procedure for high CFRD on thick layered deposit considering multiple engineering demand parameters (EDPs), and evaluates the effectiveness of gravel column and berm reinforcement for a typical CFRD. Solid-fluid coupled seismic response analysis of high CFRD on thick layered deposit is conducted using an advanced elasto-plastic constitutive model for soil, revealing the unique seismic response of the system, including the buildup of excess pore pressure within the thick deposit. Based on the high-fidelity simulations, appropriate intensity measure (IM) and EDPs are identified, and corresponding damage states (DS) are determined. Fragility curves are then developed using multiple stripe analysis, so that the probability of damage under different input motion intensities can be quantified for different DS. Using the proposed procedure, the reinforcement effects of berms and gravel columns are evaluated. Results show that berms can contribute significantly to reducing the probability of damage for the system, while the effect of gravel columns is unsatisfactory due to the limited achievable installation depth compared to the thickness of the deposit and low replacement ratio.

This study investigates the microhardness and geometric degradation mechanisms of interfacial transition zones (ITZs) in recycled aggregate concrete (RAC) exposed to saline soil attack, focusing on the influence of supplementary cementitious materials (SCMs). Ten RAC mixtures incorporating fly ash (FA), granulated blast furnace slag (GBFS), silica fume (SF), and metakaolin (MK) at 10 %, 15 %, and 20 % replacement ratios were subjected to 180 dry-wet cycles in a 7.5 %MgSO4-7.5 %Na2SO4-5 %NaCl solution. Key results reveal that ITZ's microhardness and geometric degradation decreases with exposure depth but intensifies with prolonged dry-wet cycles. The FAGBFS synergistically enhances ITZ microhardness while minimizing geometric deterioration, with ITZ's width and porosity reduced to 67.6-69.0 mu m and 25.83 %, respectively. In contrast, FA-SF and FA-MK exacerbate microhardness degradation, increasing porosity and amplifying microcrack coalescence. FA-GBFS mitigates the diffusion-leaching of aggressive/original ions and suppresses the formation of corrosion products, thereby inhibiting the initiation and propagation of microcracks. In contrast, FA-SF and FA-MK promote the formation of ettringite/gypsum and crystallization bloedite/glauberite, which facilitates the formation of trunk-limb-twig cracks.

This paper deals with the contribution of the soil-structure interaction (SSI) effects to the seismic analysis of cultural heritage buildings. This issue is addressed by considering, as a case study, the Mosque-Cathedral of Cordoba (Spain). This study is focussed on the Abd al-Rahman I sector, which is the most ancient part, that dates from the 8th century. The building is a UNESCO World Heritage Site and it is located in a moderate seismic hazard zone. It is built on soft alluvial strata, which amplifies the SSI. Since invasive tests are not allowed in heritage buildings, in this work a non-destructive test campaign has been performed for the characterisation of the structure and the soil. Ambient vibration tests have been used to calibrate a refined 3D macro-mechanical-based finite element model. The soil parameters have been obtained through an in situ geotechnical campaign, that has included geophysical tests. The SSI has been accounted for by following the direct method. Nonlinear static and dynamic time-history analyses have been carried out to assess the seismic behaviour. The results showed that the performance of the building, if the SSI is accounted for, is reduced by up to 20 % and 13 % in the direction of the arcades and in the perpendicular direction, respectively. Also, if the SSI is taken into account, the damage increased. This study showed that considering the SSI is important to properly assess the seismic behaviour of masonry buildings on soft strata. Finally, it should be highlighted that special attention should be paid to the SSI, which is normally omitted in this type of studies, to obtain a reliable dynamic identification of the built heritage.