Most natural soils exhibit a certain degree of soil structure which, in general, leads to increased strength and stiffness properties. However, the mechanical characterization of these soils based on conventional laboratory testing proves difficult in many cases due to sample disturbance. The present work aims to characterize the microstructure of a postglacial, normally consolidated, fine-grained deposit in Seekirchen, Austria, adopting in situ testing, laboratory testing on high-quality samples, and numerical analysis. The latter involves recalculating in situ piezocone penetration tests (CPTu) using an advanced constitutive model for structured soil. In contrast to existing in situ interpretation methods, the results of the numerical study, the mineralogical and hydrochemical testing, as well as the oedometer and bender element testing on undisturbed and reconstituted samples suggest that the soil is characterized by a significant amount of structure. It is demonstrated that the difference in shear wave velocity measured in situ and through bender element testing on reconstituted samples can be used as an indicator for soil structure. Ignoring the effects of structure may lead to inaccurate parameter determination for advanced constitutive models, which are subsequently employed to solve complex boundary value problems in geotechnical practice. As a consequence, the prediction of expected displacement may not be reliable.

The overconsolidation ratio considerably affects the physical and mechanical properties of soil as well as the interaction between structures and soil. Scale and consolidation time limitations render the preparation of overconsolidated soil for small-scale model tests difficult. Therefore, studying structure-soil interactions, especially the vertical bearing capacity of pile foundations in overconsolidated soil becomes challenging. Given the importance of reliable overconsolidated soil in physical model tests for studying soil-structure interactions, this study, based on the fundamental of the overconsolidation ratio, established a reliable method for preparing overconsolidated soil by altering centrifuge acceleration. Piezocone penetration tests were conducted to validate the accuracy of this method. Furthermore, vertical bearing capacity of pile foundations was evaluated in various overconsolidated soils. The vertical ultimate bearing capacity of pile foundations, cone penetration resistance, pore water pressure, and sleeve friction resistance were obtained in soils with various overconsolidation ratios. Based on the results of both tests, a formula was developed to calculate the vertical ultimate bearing capacity of pile foundations, taking into account the overconsolidation ratio of soil. This proposed method for evaluating vertical bearing capacity of pile foundations in overconsolidated soil can also be applied to study interactions between other marine structures and soil. The results of the study can provide technical support for designing the foundations of offshore oil and gas facilities, wind power, and other structures.