Natural rubber latex (NRL) is a biopolymer consisting of isoprene monomers in a cis configuration connected by double bonds that can degrade naturally. Most natural rubber (NR) based products are single-use items and its microbial degradation process is relatively slow. Hence, this review highlights the importance in the enhancement of biodegradation of NR, the methods applied to increase the biodegradation rate, and characterization of biodegradation of rubber. The biodegradability of NR-based products is enhanced via selective microorganism strains, suitable composting environment and the addition of biofillers. Rubber oxygenase enzymes and latex cleavage protein are major contributors in the biodegradation of NR-based products, while biofillers such as chitosan, cellulose whiskers and starch enhances biodegradation rate up to 60 %. Biodegradation of NR-based products is confirmed through characterization of physicochemical, thermal and mechanical properties using SEM, XRD, FTIR, GPC, TGA, UTM, physical appearance and weight loss. NR-based materials with enhanced biodegradability have many uses, thus its customizability should be studied further in terms of different product forms, fabrication method, orientation of biofiller used and incorporation of metal organic frameworks.

In eutrophic shallow lakes, cyanobacterial blooms will occur frequently and then settle into sediment, leading the formation of fluid sediment. Several factors including temperature can influence surface sediment properties. In this study, the influence of temperatures on surface sediment properties was determined in microcosm experiments through monitoring sediment physicochemical and rheological properties. During one-month incubation, it was found that surface sediment density and water content varied exponentially with increase in temperatures from 10 to 35 degrees C. The results of particle size distribution indicated that cyanobacterial blooms biomass (CBB) degradation in sediment led to sediment flocculation and agglomeration. In the meantime, there were high ratios polysaccharide/protein in extracellular polymeric substances (EPSs), which enhanced the sediment particle agglomeration. Further, the yield stress in rheological test for sediment with ( R2 = 0.97) and without ( R2 = 0.85) CBB presented an exponential decay with increase in temperatures. And a threshold value at 20 degrees C for sediment critical shear stress ( tcr ) indicated that sediment could be resuspended easier when temperature was more than 20 degrees C. Altogether, this study showed that the increase in temperatures with a threshold at 20 degrees C, can cause sediment particle flocculation, resulting in a loose and fragile structure. And the results would be helpful to sediment management considering environmental effects of sediment suspension for eutrophication shallow lakes. (c) 2024 The Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V.

The physicochemical combination method (PCCM) is a new integrated method for treating and reusing large volumes of slurry-like mud (MS). To study the effects of freezing-thawing (FT) cycles on the mechanical properties of MS treated by the PCCM, unconfined compression tests (UCTs) and microstructural tests are both conducted on PCCM-treated MS samples with different combinations of FT cycles, initial water contents (wei), and cementitious binder contents (wc). The experimental results indicate that the unconfined compressive strength (UCS) and the elastic modulus (E) of PCCM-treated MS decrease exponentially when the FT cycles increase from 0 to 15. For the PCCM-treated MS samples subjected to 15 FT cycles, the reduction degree of their strength, as well as deformation resistance, is more sensitive to the variation of wc compared to that of wei. Meanwhile, the UCS and E of PCCM-treated MS samples are higher than those of the corresponding MS samples treated by the conventional cement solidification method (CCSM). The superior resistance to FT cycles of PCCM-treated MS is attributed to the presence of APAM, which not only facilitates the aggregation of soil particles but also enhances the dewatering efficiency of MS. Notably, the E/UCS value of CCSM-treated MS is 1.25 times larger than that of PCCM-treated MS, indicating the application of PCCM can significantly enhance the toughness of the treated MS.

Soil nitrogen-hydrolyzing enzymes catalyzes a key rate-limiting step in regulating the circulation of soil nutrient elements. The response of soil nitrogen (N)-hydrolyzing enzyme activities to environmental changes has been investigated in different geographic scales or ecosystems. Global warming has increased the frequency of soil freeze-thaw (FT) events, resulting in drastic changes in soil enzyme activities. Clarifying the changes in soil N-hydrolyzing enzymes under freeze-thaw conditions is essential for improving the N cycling and utilization efficiency in soil. However, how soil N-hydrolyzing enzymes respond to FT remains unclear. This study was aimed to analyze the influence of FT on soil N-hydrolyzing enzyme activity in Mollisols. The results showed that soil physicochemical properties and enzyme activities were changed after freeze-thaw events, and freeze-thaw temperature (FTF) had a greater impact on these properties than the number of freeze-thaw cycles (FTC). Correlation analysis showed that total organic carbon (TOC), total nitrogen (TN), total phosphorus (TP) and pH were the major factors affecting enzyme activities in FT events. Soil N-hydrolyzing enzyme activity was mainly regulated by environmental factors, which can directly and indirectly affect the soil enzyme activity. In the soil ecosystem, pH, TOC, TN and TP were important factors in counteracting damage to enzyme activity from FT effects and a suitable environment and adequate nutrients can limit damage to enzymes from FT events. The findings will better predictions the changing patterns of climate change on soil N-hydrolyzing enzyme activity.

These days, one of the main issues preventing agricultural development is salinized soils. Potassium fulvic acid (PFA) not only regulates plant growth, but also improves the soil nutrient content and physical structure, which makes it a soil conditioner worth promoting. Nevertheless, the research conducted thus far on the subject of PFA with regard to plant growth and inter-root microbial communities remains somewhat limited in scope. In this study, a pot experiment was conducted to simulate both the normal environment and salt stress environment. The objective of this experiment was to verify the effect of PFA on the growth of blueberry (Vaccinium corymbosum L.) as well as its effect on the soil physical and chemical indices and the soil microbial community structure. The findings demonstrated that the implementation of potassium fulvic acids exhibited a minimal impact on the growth of blueberry plants under standard environmental conditions. However, it was observed to exert a substantial effect on enhancing various physiological parameters, including plant height, root activity, and chlorophyll synthesis, particularly in response to salt stress. PFA led to a substantial augmentation in the soil organic matter content, alongside a notable rise in the alkali-hydrolyzable nitrogen (AN) and available potassium (AK) content. Concurrently, PFA caused a notable escalation in the activities of soil urease, sucrase, acid phosphatase, and catalase (p < 0.05) in the salt-stressed environment. PFA increased the abundance of Acidobacteria, Myxococcota, Ascomycota, and Fungi_phy_Incertae_sedis under salt stress, which was mainly related to the decrease in electrical conductivity (EC) values and increase in soil acid phosphatase (S-ACP) activity. It is evident that the implementation of PFA is advantageous in enhancing the saline environment, mitigating the impact of salt damage on blueberries and establishing a foundation for the expansion of cultivated areas and the sustainable cultivation of blueberries.

Pine wilt disease (PWD) is a devastating forest disease that severely impacts pine trees, with widespread outbreaks leading to catastrophic damage in pine forests worldwide. Our study aims to investigate the dynamics of PWD infection on soil physicochemical properties and biological activities, as well as the interrelationships between them. Soil samples were collected from 0 to 10 cm and 10 to 20 cm depths in subtropical Pinus massoniana (Masson pine) forests with PWD infection years of 0 (non-infection), 6, 10, and 16 years. The physicochemical properties, microbial biomass, and enzymatic activities of these soil samples were measured. The results revealed that soil non-capillary porosity, clay, microbial biomass carbon and microbial biomass nitrogen decreased significantly in 6 years forests. Available potassium consistently decreased with longer invasion periods, while soil polyphenol oxidase, leucine amino peptidase, and available phosphorous peaked in 6 years forests and then declined over time. The soil physicochemical properties, biological activities all decreased as soil depth increased. Redundancy analysis and Mantel tests underscored the critical role of Total potassium, pH, Total phosphorous, and bulk density in shaping microbial activities. This study demonstrated that PWD infection significantly effect on soil physicochemical properties, microbial biomass, and enzymatic activities with the chronosequence progresses. These finding contribute to a deeper understanding of how invasive pathogens like PWD can reshape soil environments, with implications for forest conservation and restoration practices.

Soil stability is crucial for construction, traditionally achieved with cement, lime, and fly ash. However, challenges with weak subgrade soils have led to nanomaterials as a promising alternative. This review critically evaluates the application of nanomaterials in improving the physicochemical, mechanical, and microscopic properties of subgrade and underlying soils, based on 136 peer-reviewed studies published between 2002 and 2025. Eighteen nanomaterials were identified, with nano-silica being the most studied. Other notable ones include nano-clay, carbon nanotubes, nano-alumina, nano-magnesium oxide, nano-copper, and polymeric nanomaterials. The review reveals a predominant focus on fine-grained problematic soils, particularly soft clay and silty sand, primarily in research from Iran. Nanomaterials improved soil by reducing plasticity, enhancing compaction, boosting strength (unconfined compressive strength, California Bearing Ratio, shear strength), and lowering permeability through void-filling, pozzolanic reactions, and Calcium Silicate Hydrate gel formation. They also increased durability under freeze-thaw and wet-dry cycles while reducing cement usage. However, concerns remain about cost, scalability, and environmental safety, with gaps in field-scale studies and limited research on nano-ZnO, nano-CuO, and nano-graphene oxide. This review serves as a reference for sustainable geotechnical engineering.

AimsPecan (Carya cathayensis Sarg.) is an important forest trees in China, the application of chemical pesticides for disease control has caused severe damage to the soil, including reduced fertility and disruption of microbial communities. Although Trichoderma treatment has been shown to promote plant growth and improve soil quality, its effects on the growth promotion of pecan and the impact on soil microbial communities and physicochemical properties remained unclear.MethodsIn this study, we investigated the impact of T. asperellum TCS007 spore suspension and its fermented crude extract on the growth and development of pecan seedlings. We also explored the effects of TCS007 treatment on the nutrients, enzyme activities, and microbial diversity in the rhizosphere soil of pecan seedlings during their three main growth stages.ResultsTreatment with TCS007 spore suspension or crude extract promoted the growth of pecan seedlings, with significantly higher levels of leaf hormones and defense enzyme activity compared to the control (CK). Moreover, the content of soil organic matter and ammonium nitrogen, as well as the activity of soil enzymes such as catalase and urease, were all significantly higher than CK after treatment, and the soil pH shifted from slightly acidic to slightly alkaline. The results indicated that TCS007 treatment significantly increased the richness of beneficial fungi and bacteria in the soil.ConclusionThe results demonstrated that TCS007 treatment significantly promoted the growth of pecan plants, increased enzyme activity and nutrient content in the soil, and improved the soil micro-ecological environment.

The environment has been damaged due to anthropogenic activities related to the production and consumption of cattle. The present study investigated the pollution potentials of slaughterhouse effluents on groundwater qualities in Ebonyi State Southeast Nigeria, with the specific objectives to determine the effect of slaughterhouse effluents on both microbiological, physicochemical and heavy metal parameters on the quality of groundwater. Eighty-four well water samples were taken in 2022 and 2023 from slaughterhouse locations, and a control location for the determination of physicochemical properties and microbiological contents using standard analytical methods. Datasets were analyzed using Fisher's Significance Least Difference (F-LSD) at 0.05 probability level. The study recorded higher levels of physicochemical, BOD, COD, Salinity, bacterial and fungal counts in the slaughterhouses well waters when compared to the control well water. With the exception of chloride, ammonia, copper and electrical conductivity, all water parameters were significant in both years. The result of the study also demonstrated that, with the exception of ammonia, lead, biological oxygen demand, chemical oxygen demand, salinity, salmonella spp, shigella spp, E. coli, and other coliforms, the majority of the analysed parameters were within the World Health Organisation recommended standard. In addition, as compared to the first year of study, the well water parameters were generally higher in the second year. In order to prevent groundwater pollution, the present study suggests that slaughterhouse effluents be disposed of in an environmentally responsible manner through the segregation of waste materials to prevent groundwater pollution.

The mechanical behavior of Methane Hydrate-Bearing Sediment (MHBS) is essential for the safe exploitation of Methane Hydrate (MH). In particular, the pore size and physicochemical characteristics of MHBS significantly influence its mechanical behavior, especially in clayey grain-cementing type MHBS. This study employs the Distinct Element Method (DEM) to investigate both the macroscopic and microscopic mechanical behavior of clayey grain-cementing type MHBS, focusing on variations in pore size and physicochemical characteristics. To accomplish this, we propose a Thermo-Hydro-Mechanical-Chemical-Soil Characteristics (THMCS) DEM contact model that incorporates the effects of pore size and physicochemical characteristics on the strength and modulus of MH. This THMCS model is validated using experimental data available in the literature. Using the proposed contact model, we conducted a series of investigations to explore the mechanical behavior of MHBS under conventional loading paths, including isotropic and drained triaxial tests using the DEM. The numerical results indicate that smaller pore sizes and lower water content-key physicochemical characteristics resulting from variations in electrochemical properties and the intensity of the electric field-can lead to reduced shear strength and stiffness due to the increased breakage of aggregates and weakened cementation. Additionally, heating was found to further accelerate the process of structural damage in MHBS.