Loess exhibits high sensitivity to water, rendering it susceptible to strength loss and structural destruction under hydraulic effects of rainfall, irrigation and groundwater. As an emerging soil improvement technology, microbial induced carbonate precipitation (MICP) stands out for its cost-effectiveness, efficiency, and environmental sustainability. In this study, hydroxypropyl methylcellulose (HPMC) was innovatively introduced into the MICP process to improve the strength and water stability of loess, and a set of unconfined compressive strength (UCS), direct shear, laser particle size analysis, X-ray diffraction (XRD) and scanning electron microscopy (SEM) tests were conducted. The results show that HPMC-modified MICP is able to generate a novel structural matrix combining organic and inorganic elements, significantly enhancing the strength, stiffness, and ductility of loess. HPMC protects loess from water erosion by forming viscous membranes on the surfaces of soil particles and calcium carbonate crystals. Increasing HPMC content can augment membrane viscosity, which is conducive to stabilizing the loess structure, but it has the negative effect of reducing inter-particle friction through increasing membrane thickness. As the HPMC content increased to 0.6%, the strength loss of loess under high water content decreased. These findings are expected to provide critical support for the engineering application of HPMC-modified MICP in loess improvement.

The microbial-induced calcite precipitation (MICP) technique has been developed as a sustainable methodology for the improvement of the engineering characteristics of sandy soils. However, the efficiency of MICP-treated sand has not been well established in the literature considering cyclic loading under undrained conditions. Furthermore, the efficacy of different bacterial strains in enhancing the cyclic properties of MICP-treated sand has not been sufficiently documented. Moreover, the effect of wetting-drying (WD) cycles on the cyclic characteristics of MICP-treated sand is not readily available, which may contribute to the limited adoption of MICP treatment in field applications. In this study, strain-controlled consolidated undrained (CU) cyclic triaxial testing was conducted to evaluate the effects of MICP treatment on standard Ennore sand from India with two bacterial strains: Sporosarcina pasteurii and Bacillus subtilis. The treatment durations of 7 d and 14 d were considered, with an interval of 12 h between treatments. The cyclic characteristics, such as the shear modulus and damping ratio, of the MICP-treated sand with the different bacterial strains have been estimated and compared. Furthermore, the effect of WD cycles on the cyclic characteristics of MICP-treated sand has been evaluated considering 5-15 cycles and aging of samples up to three months. The findings of this study may be helpful in assessing the cyclic characteristics of MICP-treated sand, considering the influence of different bacterial strains, treatment duration, and WD cycles. (c) 2025 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/ 4.0/).