The morphology of sheep wool applied as organic fertilizer biodegraded in the soil was examined. The investigations were conducted in natural conditions for unwashed waste wool, which was rejected during sorting and then chopped into short segments and wool pellets. Different types of wool were mixed with soil and buried in experimental plots. The wool samples were periodically taken and analyzed for one year using Scanning Electron Microscopy (SEM) and Energy-dispersive X-ray Spectroscopy (EDS). During examinations, the changes in the fibers' morphology were observed. It was stated that cut wool and pellet are mechanically damaged, which significantly accelerates wool biodegradation and quickly destroys the whole fiber structure. On the contrary, for undamaged fibers biodegradation occurs slowly, layer by layer, in a predictable sequence. This finding has practical implications for the use of wool as an organic fertilizer, suggesting that the method of preparation can influence its biodegradation rate. (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(SEM)(sic)(sic)(sic)(sic)(sic)X(sic)(sic)(sic)(sic)(EDS)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic). (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic), (sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic)(sic).

An anomalous warm weather event in the Antarctic McMurdo Dry Valleys on 18 March 2022 created an opportunity to characterize soil biota communities most sensitive to freeze-thaw stress. This event caused unseasonal melt within Taylor Valley, activating stream water and microbial mats around Canada Stream. Liquid water availability in this polar desert is a driver of soil biota distribution and activity. Because climate change impacts hydrological regimes, we aimed to determine the effect on soil communities. We sampled soils identified from this event that experienced thaw, nearby hyper-arid areas, and wetted areas that did not experience thaw to compare soil bacterial and invertebrate communities. Areas that exhibited evidence of freeze-thaw supported the highest live and dead nematode counts and were composed of soil taxa from hyper-arid landscapes and wetted areas. They received water inputs from snowpacks, hyporheic water, or glacial melt, contributing to community differences associated with organic matter and salinity gradients. Inundated soils had higher organic matter and lower conductivity (p < .02) and hosted the most diverse microbial and invertebrate communities on average. Our findings suggest that as liquid water becomes more available under predicted climate change, soil communities adapted to the hyper-arid landscape will shift toward diverse, wetted soil communities.

To investigate the coupled time effects of root reinforcement and wet-dry deterioration in herbaceous plant-loess composites, as well as their microscopic mechanisms, this study focused on alfalfa root-loess composites at different growth stages cultivated under controlled conditions. The research included measuring root morphological parameters, conducting wet-dry cycling tests, and performing triaxial compression tests and microscopic analyses (CT scanning and nuclear magnetic resonance) on both bare loess and root-loess composites under various wet-dry cycling conditions. By obtaining shear strength parameters and microstructural indices, the study analyzed the temporal evolution of the shear strength and microstructural characteristics of root-loess composites under wet-dry cycling. The findings indicated that the alfalfa root-loess composite effective cohesion was significantly higher than that of the plain soil in the same growth stage. The alfalfa root-loess composite effective cohesion increased during the growth stage in the same dry-wet cycles. The alfalfa root-loess composite effective cohesion in the same growth stage was negatively correlated with the number of dry-wet cycles. The fatigue damage of the soil's microstructure (pore coarsening, cement hydrolysis, and crack development) increased continuously with the number of dry-wet cycles. However, due to the difference in mechanical properties between roots and the soil, the root-soil composite prevented the deterioration of the soil matrix strength by the dry-wet cycles. As the herbaceous plants grow, the time effect observed in the shear strength of the root-soil composite under the action of dry-wet cycles is the result of the interaction and dynamic coordination between the soil-stabilizing function of the herbaceous plant roots and the deterioration caused by drywet cycles.

Evaluating petroleum contamination risk and implementing remedial measures in agricultural soil rely on indicators such as soil metal(loid)s and microbiome alterations. However, the response of these indicators to petroleum contamination remains under-investigated. The present study investigated the soil physicochemical features, metal(loid)s, microbial communities and networks, and phospholipid fatty acids (PLFAs) community structures in soil samples collected from long-(LC) and short-term (SC) petroleum-contaminated oil fields. The results showed that petroleum contamination increased the levels of soil total petroleum hydrocarbon, carbon, nitrogen, sulfur, phosphorus, calcium, copper, manganese, lead, and zinc, and decreased soil pH, microbial biomass, bacterial and fungal diversity. Petroleum led to a rise in the abundances of soil Proteobacteria, Ascomycota, Oleibacter, and Fusarium. Network analyses showed that the number of network links (Control vs. SC, LC = 1181 vs. 700, 1021), nodes (Control vs. SC, LC = 90 vs. 71, 83) and average degree (Control vs. SC, LC = 26.244 vs. 19.718, 24.602) recovered as the duration of contamination increased. Petroleum contamination also reduced the concentration of soil PLFAs, especially bacterial. These results demonstrate that brief exposure to high levels of petroleum contamination alters the physicochemical characteristics of the soil as well as the composition of soil metal(loid)s and microorganisms, leading to a less diverse soil microbial network that is more susceptible to damage. Future research should focus on the culturable microbiome of soil under petroleum contamination to provide a theoretical basis for further remediation. (c) 2025 The Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V.

This study systematically investigated the pore structure response of kaolin and illite/smectite mixed-layer rich clay in a reconstituted state to one-dimensional (1D) compression by first performing oedometer tests on saturated clay slurries, followed by characterising their pore structure using multi-scale characterisation techniques, with the primary objective of advancing the current understanding of the microstructural mechanisms underlying the macroscopic deformation of such clays. Under 1D loading, the volume reduction observed at the macro level essentially represented the macroscopic manifestation of changes in inter-aggregate porosity at the pore scale. It was the inter-particle pores that were compressed, despite the interlayer pores remaining stable. Two distinct pore collapse mechanisms were identified: kaolin exhibited a progressive collapse of particular larger pore population in an ordered manner, whereas illite/smectite mixed-layer rich clay demonstrated overall compression of inter-aggregate pores. Accordingly, mathematical relationships between the porosity and compressibility parameters for these two soils were proposed, with the two exhibiting opposite trends arising from their distinct microstructural features. Approaching from the unique perspective of pore structure, quantitative analysis of pore orientation and morphology on the vertical and horizontal planes demonstrated some progressively increasing anisotropy during compression. These findings provide important insights into porescale mechanisms governing clay compression behaviour and enrich the limited microporosity database in soil mechanics.

Fragile fruits, which are prone to mechanical damage and microbial infection, necessitate protective materials that possess both cushioning and antimicrobial properties. In this study, we present a novel genipin-crosslinked chitosan/gelatin aerogel (CS/GEL/GNP) synthesized through direct mixing and free-drying techniques. The mechanical properties and cushioning capacities of the CS/GEL/GNP aerogel were thoroughly characterized, alongside an evaluation of its antimicrobial efficacy. The composite aerogel demonstrated remarkable compressibility and shape recovery characteristics. In a transportation simulation test, the aerogel effectively protected strawberries from mechanical damage. Furthermore, the composite aerogel exhibited enhanced antimicrobial activities against Escherichia coli, Staphylococcus aureus and Botrytis cinerea in vitro. The quality of strawberries was successfully maintained at ambient temperature when packaged with the CS/GEL/GNP. Notably, the aerogel could be completely degraded in the soil within 21 days and is nontoxic to cells. Consequently, the dual-functional CS/GEL/GNP aerogel presents a promising option for packaging materials aimed at protecting delicate fruits.

This study investigates the microhardness and geometric degradation mechanisms of interfacial transition zones (ITZs) in recycled aggregate concrete (RAC) exposed to saline soil attack, focusing on the influence of supplementary cementitious materials (SCMs). Ten RAC mixtures incorporating fly ash (FA), granulated blast furnace slag (GBFS), silica fume (SF), and metakaolin (MK) at 10 %, 15 %, and 20 % replacement ratios were subjected to 180 dry-wet cycles in a 7.5 %MgSO4-7.5 %Na2SO4-5 %NaCl solution. Key results reveal that ITZ's microhardness and geometric degradation decreases with exposure depth but intensifies with prolonged dry-wet cycles. The FAGBFS synergistically enhances ITZ microhardness while minimizing geometric deterioration, with ITZ's width and porosity reduced to 67.6-69.0 mu m and 25.83 %, respectively. In contrast, FA-SF and FA-MK exacerbate microhardness degradation, increasing porosity and amplifying microcrack coalescence. FA-GBFS mitigates the diffusion-leaching of aggressive/original ions and suppresses the formation of corrosion products, thereby inhibiting the initiation and propagation of microcracks. In contrast, FA-SF and FA-MK promote the formation of ettringite/gypsum and crystallization bloedite/glauberite, which facilitates the formation of trunk-limb-twig cracks.

Silica fume and carbide slag can be used to modify waste mud soil (WMS), which can not only improve the mechanical properties of WMS, but also broaden resource utilization ways of silica fume and carbide slag. For that, in this paper, WMS was modified by adopting 8 % carbide slag and silica fume with different dosages (0, 3 %, 5 %, 7 %, 9 %, and 11 %). Then the small-strain dynamic properties of modified WMS were investigated by using resonance column test, and the microscopic mechanism of modified WMS was analyzed based on Scanning electron microscopy (SEM), Energy dispersive X-ray spectrometer (EDS), Transmission electron microscopy (TEM), X-ray diffraction test (XRD) and Mercury intrusion porosimetry (MIP). It can be found from the resonance column test that the dynamic shear modulus and the damping ratio show an increasing and decreasing trend with the increase of the confining pressure respectively, and both increase with increasing silica fume dosage in the range of 0 to 11 %. A kinetic model applicable to modified WMS was established by introducing the effects of confining pressure and silica fume into the Hardin-Drnevich model. Microscopic testing experiments indicate that there is a reaction between reactive SiO2 in silica fume and Ca(OH)2 in carbide slag, and calcium hydrated silicate (CSH) was generated, which improved the specimen density.

In geotechnical engineering, the development of efficient and accurate constitutive models for granular soils is crucial. The micromechanical models have gained much attention for their capacity to account for particle-scale interactions and fabric anisotropy, while requiring far less computational resources compared to discrete element method. Various micromechanical models have been proposed in the literature, but none of them have been conclusively shown to agree with the critical state theory given theoretical proof, despite the authors described that their models approximately reach the critical state. This paper modifies the previous CHY micromechanical model that is compatible with the critical state theory based on the assumption that the microscopic force-dilatancy relationship should align with the macroscopic stress-dilatancy relationship. Moreover, under the framework of the CHY model, the fabric anisotropy can be easily considered and the anisotropic critical state can be achieved with the introduction of the fabric evolution law. The model is calibrated using drained and undrained triaxial experiments and the results show that the model reliably replicates the mechanical behaviors of granular materials under both drained and undrained conditions. The compatibility of the model with the critical state theory is verified at both macroscopic and microscopic scales.

This study presents a novel micromorphic continuum model for sand-gravel mixtures with low gravel contents, which explicitly accounts for the influences of the particle size distribution, gravel content, and fabric anisotropy. This model is rigorously formulated based on the principle of macro-microscopic energy conservation and Hamilton's variational principle, incorporating a systematic analysis of the kinematics of coarse and fine particles as well as macro-microscopic deformation differentials. Dispersion equations for plane waves are derived to elucidate wave propagation mechanisms. The results demonstrate that the model effectively captures normal dispersion characteristics and size-dependent effects on wave propagation in these mixtures. In long-wavelength regimes, wave velocities are governed by macroscopic properties, whereas decreasing wavelengths induce interparticle scattering and multiple reflections, attenuating velocities or inhibiting waves, especially when wavelengths approach interparticle spacing. The particle size, porosity, and stiffness ratio primarily influence the macroscopic average stiffness, exhibiting consistent effects on dispersion characteristics across all wavelength domains. In contrast, the particle size ratio and gravel content simultaneously influence both macroscopic mechanical properties and microstructural organization, leading to opposing trends across different wavelength ranges. Model validation against experiments confirms its exceptional predictive ability regarding wave propagation characteristics, including relationships between lowpass threshold frequency, porosity, wave velocity, and coarse particle content. This study provides a theoretical foundation for understanding wave propagation in sand-gravel mixtures and their engineering applications.