Magnesia carbonation can be adopted as a soil solidification technology for geotechnical engineering. Recent studies have shown that urea decomposition under the catalyzation of ureolytic bacteria can provide a carbon source for magnesia carbonation. Although many related studies have been reported, the mechanical behaviour of the magnesia solidified soil, especially its durability and long-term performance, still require further deep investigations. Besides, the use of plant urease instead of bacteria for magnesia carbonation is also of research interest and requires further studies. In this study, we used crude soybean urease for the catalyzation of urea decomposition in order to provide carbon source for magnesia carbonation (soybean urease intensified magnesia carbonation, SIMC). The mechanical behaviour and durability of SIMC solidified soil under drying-wetting and soaking conditions in acid rain solution were investigated. For SIMC samples, the addition of urea and urease as internal carbon sources led to a much higher strength compared with those without them. The optimum urea concentration was 2 mol/L, and higher concentrations could have negative impact on the strength. As for magnesia, the highest strengths were obtained when the addition was 8 %. During the drying-wetting cycles and soaking tests with acid rain water, there was a generally moderate decreasing trend in strength for the SIMC samples with more drying-wetting cycles or soaking durations. However, the strength reduction ratio, which was defined as the long-term strength in acid environment to that in neutral environment, was much higher compared to the PC samples, implying a much stronger resistance to acid rain water. The mineralogical analysis revealed that hydrated magnesium carbonates were the major effective cementing materials.

The rapid depletion of natural aggregate resources has led to the exploration of recycled aggregates as sustainable alternatives. The steel industry annually generates 28 million tons of magnesia-based waste refractories (WMRs), making their incorporation into construction materials a potential strategy for resource conservation. However, WMR recycling poses a challenge because of its susceptibility to volume expansion during hydration. This study evaluated the feasibility of an environmentally friendly additive, lignosulfonate (LS), for stabilizing crushed waste magnesia refractory bricks (CWMR) to explore the potential application of WMR as construction aggregates. The swelling properties, including the free swell index (FSI) and the swell pressure (Ps), and mechanical properties including unconfined/uniaxial compressive strength (qU), shear wave velocity (VS), and thermal conductivity (lambda) of LS stabilized CWMR (CWMLS) were evaluated over different curing periods at varying LS contents (LSc). Hydration transformed CWMR from sandlike to highly plastic silt-like, resulting in a significant FSI of 250 % and Ps of 5.2 MPa. LS effectively stabilized CWMR, as indicated by decreased FSI and Ps, and enhanced qU and VS. Microscopic observation and mineralogy analyzes confirmed that LS stabilizes CWMR by adsorbing onto its surface. Stabilization of thermal conductivity at higher LSc over curing periods further supports these interactions. Macroscopic behavioral analyzes give stabilized effect of 94.3 % at LSc = 5 % with minimal improvement at higher LSc. These findings highlight LS as a promising stabilizer for mitigating hydration-induced expansion and improving the mechanical properties of CWMR, supporting its application as a recycled aggregate in construction.

Carbonation technology using MgO and CO2 has been considered a rapid, effective, and environmentally friendly method for improving weak soils, mainly applied in shallow foundation treatments. This study introduced a novel MgO-carbonated composite pile (MCP) technique developed by injecting CO2 through a gas-permeable pipe pile into a MgO-mixing column for carbonation and solidification and its applications in weak subgrade treatments. Several field tests were carried out to study the characteristics of MCP as well as the performance of the MCP-reinforced foundations, including carbonation reaction temperature monitoring, pore-water pressure monitoring, standard penetration tests (SPTs), unconfined compressive strength (UCS) tests, static load tests, and subgrade deformation monitoring. Results showed vigorous and uniform carbonation within the MgO-mixing column, confirming the feasibility of constructing large-diameter MgO-mixing columns. The distribution, evolution, and affected zone of excess pore-water pressure induced by MCP installation were determined. The MCP exhibited good pile quality, with average SPT blow count and UCS value of 39 and 1021 kPa, respectively. MCP's bearing capacity was superior to prestressed high-strength concrete pipe piles, with ultimate vertical and lateral bearing capacities of 1920 and 119 kN, respectively. The MCP-reinforced foundation exhibited a small settlement of 54.5 mm under embankment loads. Life cycle assessment indicated significant carbon reduction benefits for MCP, with 44.7% lower carbon emissions compared to traditional composite piles.

There are a large number of microorganisms such as bacteria and fungi in the soil, which affect the physical and mechanical properties of the rock and soil. Microbial solidification technology is the use of microbial metabolism to induce mineral precipitation, thereby changing the soil structure and improving the physical and mechanical properties of the soil. This article uses microbial activated magnesium oxide solidification technology to treat red clay samples, and explores the effects of magnesium oxide content, bacterial solution concentration, and initial moisture content on the shear strength and disintegration of red clay. The experimental results are explained reasonably through scanning electron microscopy experiments and ImageJ quantitative analysis software. The experimental results show that the shear strength of red clay is positively correlated with the content of magnesium oxide and bacterial solution concentration, but negatively correlated with the initial moisture content; The hydrated magnesium carbonate generated in the experiment is the key reason for the improvement of shear strength. Hydrated magnesium carbonate can play a role in bonding red clay particles and filling the pores of red clay; Significant reduction in disintegration of microbial magnesium oxide solidified red clay.

This study proposed an improved bio-carbonation of reactive magnesia cement (RMC) method for dredged sludge stabilization using the urea pre-hydrolysis strategy. Based on unconfined compression strength (UCS), pickling-drainage, and scanning electron microscopy (SEM) tests, the effects of prehydrolysis duration (T), urease activity (UA) and curing age (CA) on the mechanical properties and microstructural characteristics of bio-carbonized samples were systematically investigated and analyzed. The results demonstrated that the proposed method could significantly enhance urea hydrolysis and RMC bio-carbonation to achieve efficient stabilization of dredged sludge with 80% high water content. A significant strength increment of up to about 1063.36 kPa was obtained for the bio-carbonized samples after just 7 d of curing, which was 2.64 times higher than that of the 28-day cured ordinary Portland cement-reinforced samples. Both elevated T and UA could notably increase urea utilization ratio and carbonate ion yield, but the resulting surge in supersaturation also affected the precipitation patterns of hydrated magnesia carbonates (HMCs), which weakened the cementation effect of HMCs on soil particles and further inhibited strength enhancement of bio-carbonized samples. The optimum formula was determined to be the case of T = 24 h and UA = 10 U/mL for dredged sludge stabilization. A 7-day CA was enough for bio-carbonized samples to obtain stable strength, albeit slightly affected by UA. The benefits of high efficiency and water stability presented the potential of this method in achieving dredged sludge stabilization and resource utilization. This investigation provides informative ideas and valuable insights on implementing advanced bio-geotechnical techniques to achieve efficient stabilization of soft soil, such as dredged sludge. (c) 2024 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).

Sulfate soils often caused foundation settlement, uneven deformation, and ground cracking. The distribution of sulfate-bearing soil is extensive, and effective stabilization of sulfate-bearing soil could potentially exert a profound influence on environmental protection. Ground granulated blast furnace slag (GGBS)-magnesia (MgO) can be an effective solution to stabilize sulfate soils. Dynamic cyclic loading can be used to simulate moving vehicles applied on subgrade soils, but studies on the dynamic mechanical properties of sulfate-bearing soil under cyclic loading are limited. In this study, GGBS-MgO was used to treat Ca-sulfate soil and Mg-sulfate soil. The swelling of the specimens was analyzed by a three-dimensional swelling test, and the change in compressive strength of the specimens after immersion was analyzed by an unconfined test. The dynamic elastic properties and energy dissipation of GGBS-MgO-stabilized sulfate soils were evaluated using a fatigue test, and the mineralogy and microstructure of the stabilized soils were investigated by X-ray diffraction and scanning electron microscopy. The results showed that the maximum swelling percentage of stabilized Ca-sulfate soil was achieved when the GGBS:MgO ratio was 6:4, resulting in an expansion rate of 14.211%. In contrast, stabilized Mg-sulfate soil exhibited maximum swelling at GGBS:MgO = 9:1, with a swelling percentage of 5.127%. As the GGBS:MgO ratio decreased, the dynamic elastic modulus of stabilized Ca-sulfate soil diminished from 2.8 MPa to 2.69 MPa, and energy dissipation reduced from 0.02 MJ/m3 to 0.019 MJ/m3. Conversely, the dynamic elastic modulus of stabilized Mg-sulfate soil escalated from 2.16 MPa to 6.12 MPa, while energy dissipation decreased from 0.023 MJ/m3 to 0.004 MJ/m3. After soaking, the dynamic elastic modulus of Ca-sulfate soil peaked (4.01 MPa) and energy dissipation was at its lowest (0.012 MJ/m3) at GGBS:MgO = 9:1. However, stabilized Mg-sulfate soil exhibited superior performance at GGBS:MgO = 6:4, with a dynamic elastic modulus of 0.74 MPa and energy dissipation of 0.05 MJ/m3. CSH increased significantly in the Ca-sulfate soil treated with GGBS-MgO. The generation of ettringite increased with the decrease in the GGBS-MgO ratio after immersion. MSH and less CSH were formed in GGBS-MgO-stabilized Mg-sulfate soil compared to Ca-sulfate soils. In summary, the results of this study provide some references for the improvement and application of sulfate soil in the field of road subgrade.

Quicklime (CaO) or reactive magnesia (MgO) could be utilized as a novel activator of ground granulated blast-furnace slag (GGBS) to produce the geopolymer. The geopolymer was used to solidify soft soil, showing a significant environmental benefit over conventional Portland cement. In this study, the geopolymers were made according to the weight ratio of CaO/MgO to GGBS of 1:9 and 2:8 and were further used to solidify silty clay. The engineering and microstructural characteristics of the solidified silty clay were investigated through various physicochemical, mechanical, and microscopic tests. The results indicated that the unconfined compressive strength of the solidified specimens increased with the increase of activator ratio and curing period. The CaO-GGBS (CG)-solidified soil had a higher unconfined compressive strength than the MgO-GGBS (MG)-solidified soil after 7-day curing, while the MG-solidified soil showed good mechanical properties in the long run. The pH and electrical conductivity of the solidified soils gradually decreased with the decreasing binder dosage and the increasing curing period, and these values of MG-solidified soils were lower than those of CG-solidified soils. Based on XRD analysis, the CSH and hydrotalcite were confirmed to be the main hydration product of both CG/MG-solidified soils in filling the large pores, and the reinforcement mechanism model for the soil treated with CG/MG geopolymers was also proposed. The research results demonstrated that CG/MG geopolymers can be used as a binder to solidify soft soils.