The need for renewable and biodegradable materials for packaging applications has grown significantly in recent years. Growing environmental worries over the widespread use of synthetic and non-biodegradable polymeric packaging, particularly polyethylene, are linked to this increase in demand. This study investigated the degradation properties of low-density polyethylene (LDPE), a material commonly used in packaging, after incorporating various natural fillers that are sustainable, compatible, and biodegradable. The LDPE was mixed with 2.5, 5, and 10 wt.% of sawdust, cellulose powder, and Nanocrystalline cellulose (CNC). The composites were melted and mixed using a twin-screw extruder machine with a screw speed of 50 rpm at 190 degrees C to produce sheets using a specific die. These sheets were used to prepare samples for rheological tests that measured the viscosity curve, the flow curve, and a non-Newtonian mathematical model using a capillary rheometer at 170, 190, and 210 degrees C. X-ray diffraction analysis was carried out on the 5 wt.% samples, and a short-term degradation test was conducted in soil with a pH of 6.5, 50% humidity, and a temperature of 27 degrees C. The results revealed that the composite melts exhibited non-Newtonian behavior, with shear thinning being the dominant characteristic in the viscosity curves. The shear viscosity increased as the different cellulose additives increased. The 5% ratio had a higher viscosity for all composite melts, and the LDPE/CNC melts showed higher viscosities at different temperatures. The curve fitting results confirmed that the power-law model best described the flow behavior of all composite melts. The LDPE/sawdust and cellulose powder melts showed higher flow index (n) and lower viscosity consistency (k) values compared with LDPE/CNC melted at different temperatures. The sawdust and powder composites had greater weight loss compared with the LD vbbPE/CNC composites; digital images supported these results after 30 days. The degradation test and weight loss illustrated stronger relations with the viscosity values at low shear rates. The higher the shear viscosity, the lower the degradation and vice versa.