Soil chemical washing has the disadvantages of long reaction time, slow reaction rate and unstable effect. Thus, there is an urgent need to find a cost-effective and widely applicable alternative power to facilitate the migration of washing solutions in the soil, so as to achieve efficient removal of heavy metals, reduce the risk of soil compaction, and mitigate the damage of soil structure. Therefore, the study used a combination of freeze-thaw cycle (FTC) and chemical washing to obtain three-dimensional images of soil pore structure using micro-X-ray microtomography, and applied image analysis techniques to study the effects of freeze-thaw washing on the characteristics of different pore structures of the soil, and then revealed the effects of pore structure on the removal of heavy metals. The results showed that the soil pore structure of the freeze-thaw washing treatment (FT) became more porous and complex, which increased the soil imaged porosity (TIP), pore number (TNP), porosity of macropores and irregular pores, permeability, and heavy metal removal rate. Macroporosity, fractal dimension, and TNP were the main factors contributing to the increase in TIP between treatments. The porous structure resulted in larger effective pore diameters, which contain a greater number of branching pathways and pore networks, allowing the chemical washing solutions to fully contact the soil, increasing the roughness of the soil particle surface, mitigating the risk of soil compaction, and decreasing the contamination of heavy metals. The results of this study contribute to provide new insights into the management of heavy metal pollution in agricultural soils.

The environmental threat, pollution and damage posed by heavy metals to air, water, and soil emphasize the critical need for effective remediation strategies. This review mainly focuses on microbial electrochemical technologies (MET) for treating heavy metal pollutants, specifically includes Chromium (Cr), Copper (Cu), Zinc (Zn), Cadmium (Cd), Lead (Pb), Nickel (Ni), and Cobalt (Co). First, it explores the mechanisms and current applications of MET in heavy metal treatments in detail. Second, it systematically summarizes the key microbial communities involved, analyzing their extracellular electron transfer (EET) processes and summarizing strategies to enhance the EET efficiencies. Next, the review also highlights the synergistic microbial interactions in bioelectrochemical systems (BES) during the recovery and removal (remediation) processes of heavy metals, underscoring the crucial role of microorganisms in the transfer of the electrons. Then, this paper discussed how factors including pH values, applied voltages, types and concentrations of electron donors, electrode materials, biofilm thickness and other factors affect the treatment efficiencies of some specific metals in BES. BES has shown its great superiority in treating heavy metals. For example, for the treatments of Cr6+, under low pH conditions, the recovery and removal rate of Cr-6(+) by double chambers microbial fuel cell (DCMFC) can generally reach 98-99%, with some cases even achieving 100% (Gangadharan & Nambi, 2015). For the treatments of heavy metal ions such as Cu2+, Zn2+ and Cd2+, BES can also achieve the rates of treatments of more than 90% under the corresponding conditions of appropriate pH values and applied voltages(Choi, Hu, & Lim, 2014; W. Teng, G. Liu, H. Luo, R. Zhang, & Y. Xiang, 2016; Y. N. Wu et al., 2019; Y. N. Wu et al., 2018). After that, the review outlines the future challenges and the research opportunities for understanding the mechanisms of BES and microbial EET in heavy metal treatments. Finally, the prospect of future BES researches are pointed out, including the combinations with existing wastewater treatment systems, the integrations with the wind energy and the solar energy, and the application of machine learning (ML) in future BES. This article has certain significance and value for readers to better understand the working principles of BES and better operate and control BES to deal with heavy metal pollutants.