As a newly emerged solution for supporting the new generation of offshore wind turbines (OWTs), the pile-bucket foundation has received wide attention. However, little attention has been paid to the grouted connection that connects the monopile and bucket foundation. As the loadtransferring, yet vulnerable component, the fatigue mechanism of the grouted connection and its influence on the cyclic laterally-loaded response of OWT foundation are still not clear. In this study, a sophisticated three-dimensional (3D) finite element (FE) model of the pile-bucket foundation with grouted connection is constructed, which incorporates a hypoplastic clay model and the concrete damage plasticity (CDP) to consider the cyclic load effect on both soil and grout material. A modal analysis is first performed to verify the rationality of the proposed model. Then the influence of cyclic load frequency, load amplitude and stiffener arrangement on the accumulation of pile head displacement, stress distribution and crack development of the grouted connection is systematically analyzed. Results indicate that as load frequency approaches the eigen-frequency, the OWT structure tends to vibrate more intensively, leading to stress concentration and fatigue damage of the grouted material and rapid accumulation of the pile-head displacement. The influence of load amplitude on grout damage seems to be limited in the contact area in the simulated cases. Meanwhile, the installation of stiffeners slightly mitigates the pile head displacement accumulation, but also raises the risk of stress concentration and fatigue damage of the grouted connection. The numerical results reveal the load-transferring function and fatigue damage of the grouted connection, which could provide some reference for an optimized structure and dynamic design for the pile-bucket foundation under cyclic load.

The urgent global drive to mitigate greenhouse gas emissions has significantly boosted renewable energy production, notably expanding offshore wind energy across the globe. With the technological evolution enabling higher-capacity turbines on larger foundations, these installations are increasingly situated in earthquake-prone areas, underscoring the critical need to ensure their seismic resilience as they become a pivotal component of the global energy infrastructure. This study scrutinises the dynamic behaviour of a 15 MW offshore wind turbine (OWT) under concurrent earthquake, wind and wave loads, focusing on the performance of the ultra-high-strength cementitious grout that bonds the monopile to the transition piece. Employing LS DYNA for numerical simulations, we explored the seismic responses of four OWT designs with diverse transition piece cone angles, incorporating nonlinear soil springs to model soil-structure interactions (SSIs) and conducting a site response analysis (SRA) to account for local site effects on ground motion amplification. Our findings reveal that transition pieces with larger cone angles exhibit substantially enhanced stress distribution and resistance to grout damage, evidenced by decreased ovalisation in the coned sections of the transition piece and monopile, and improved bending flexibility. The observed disparities in damage across different cone angles highlight shortcomings in current design guidelines pertaining to the prediction of grout stresses in conical transition piece designs, with the current code-specified calculations predicting higher stresses for transition piece designs with larger cone angles. This study also highlights the code's limitations when accounting for grout damage induced by stress concentrations in the grouted connections under seismic dynamic loading conditions. The results of the study demonstrate the need for refinement of these guidelines to improve the seismic robustness of OWTs, thereby contributing to the resilience of renewable energy infrastructure against earthquake-induced disruptions.

Offshore wind farms are located in marine environments with complex hydrological, meteorological and submarine geological conditions, which pose difficulties for wind turbine foundation design and construction. Therefore, the study of the key technologies of offshore wind turbine foundation design has important theoretical value and practical significance for the assurance of structural safety, the optimization of structural design and the extension of structural service life. In this paper, a numerical simulation model of three pile foundation is established, and a detailed FEA model of grouted area is calculated and analyzed, and influence of grout on performance under different loading conditions is calculated and analyzed. The results show that it is feasible to use the p-y curve method to describe the pile-soil interaction of the three-pile foundation of the offshore wind turbine, the stress check of the whole foundation structure under ultimate load conditions and normal load conditions meets the requirements of the DNV specification, and the result of the fatigue damage check is that the fatigue strength requirement is met in 26.7 years, which indicates that the three-pile foundation structure of the offshore wind turbine is safe and reliable and can be operated safely.