The deterioration of soft rocks caused by freeze-thaw (F-T) climatic cycles results in huge structural and financial loss for foundation systems placed on soft rocks prone to F-T actions. In this study, cementtreated sand (CTS) and natural soft shale were subjected to unconfined compression and splitting tensile strength tests for evaluation of unconfined compressive strength (UCS, qu), initial small-strain Young's modulus (Eo) using linear displacement transducers (LDT) up to a small strain of 0.001%, and secant elastic modulus (E50) using linear variable differential transducers (LVDTs) up to a large strain of 6% before and after reproduced laboratory weathering (RLW) cycles (-20 degrees C-110 degrees C). The results showed that eight F-T cycles caused a reduction in qu, E50 and Eo, which was 8.6, 15.1, and 14.5 times for the CTS, and 2.2, 3.5, and 5.3 times for the natural shale, respectively. The tensile strength of the CTS and natural rock samples exhibited a degradation of 5.4 times (after the 8th RLW cycle) and 2.7 times (after the 15th RLW cycle), respectively. Novel correlations have been developed to predict Eo (response) from the parameters quand E50 (predictors) using MATLAB software's curve fitter. The findings of this study will assist in the design of foundations in soft rocks subjected to freezing and thawing. The analysis of variance (ANOVA) indicated 95% confidence in data health for the design of retaining walls, building foundations, excavation in soft rock, large-diameter borehole stability, and transportation tunnels in rocks for an operational strain range of 0.1%-0.01% (using LVDT) and a reference strain of less than 0.001% (using LDT). (c) 2025 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/ 4.0/).

Freeze-thaw (F-T) cycling poses a significant challenge in seasonally frozen zones, notably affecting the mechanical properties of soil, which is a critical consideration in subgrade engineering. Consequently, a series of unconfined compressive strength tests were conducted to evaluate the influence of various factors, including fiber content, fiber length, curing time, and F-T cycles on the unconfined compression strength (UCS) of fiber-reinforced cemented silty sand. In parallel, acoustic emission (AE) testing was conducted to assess the AE characteristic parameters (e.g., cumulative ring count, cumulative energy, energy, amplitude, RA, and AF) of the same material under F-T cycles, elucidating the progression of F-T-induced damage. The findings indicated that UCS initially increased and then declined as fiber content increased, with the optimal fiber content identified at 0.2%. UCS increased with prolonged curing time, while increases in fiber length and F-T cycles led to a reduction in UCS, which then stabilized after 6 to 10 cycles. Stable F-T cycles resulted in a strength loss of approximately 30% in fiber-reinforced cemented silty sand. Furthermore, AE characteristic parameters strongly correlated with the stages of damage. F-T damage was segmented into three stages using cumulative ring count and cumulative energy. An increase in cumulative ring count to 0.02 x 104 times and cumulative energy to 0.03 x 104 mvmu s marked the emergence of critical failure points. A sudden shift in AE amplitude indicated a transition in the damage stage, with an amplitude of 67 dB after 6 F-T cycles serving as an early warning of impending failure.