Many single-use plastic (SUP) options made of synthetic polymers, bio-based materials, and blends of both are available in the market and used in large quantities. The disintegration of eleven commercial SUP, marketed in Mexico as cups and plates, was investigated in an aerobic home compost environment at a laboratory scale over 180 days. An evaluation of chemical changes, surface morphology, and thermal and mechanical properties was conducted to ascertain the original composition of SUP and the progression of disintegration in samples that are challenging to clean from soil contamination. Furthermore, the impact of residual compost on barley (Hordeum vulgare) plant growth and its correlation with the leaching of heavy metals were explored. The bio-based SUP, but not those made of expanded polystyrene foam, showed a correlation between the disintegration degree (measured by weight loss into particles <2 mm) and a decrease in functional groups (observed by FT-IR), mechanical-thermal stability loss, and surface wear over disintegration time. For instance, the highest disintegration at 180 days was approximately 70 % for wheat bran and palm leaf plates, followed by wheat plates and cellulose-PLA cups (60 %). In addition to the components listed by the manufacturers, the FT-IR and DSC analysis revealed the presence of polyethylene and polypropylene in cellulose cups and sugarcane plates. These components, impede disintegration but contribute to preserving thermal resistance and hydrophobicity during utilization. Compost derived from expanded polystyrene foam SUP, with 90 days of disintegration, was rich in zinc and chromium and significantly decrease in the root length of the barley plant compared to the control. This demonstrates the necessity of considering the impact of the leaching of additives and secondary microplastics into the environment.

The microplastics and organic additives formed in routine use of plastic takeaway food containers may pose significant health risks. Thus, we collected plastic containers made of polystyrene, polypropylene, polyethylene terephthalate, polylactic acid and simulated two thermal usages, including hot water (I) and microwave treatments (M). Nile Red fluorescence staining was developed to improve accurate counting of microplastics with the aid of TEM and DLS analysis. The quantity of MPs released from thermal treatments was determined ranging from 285.7 thousand items/cm(2) to 681.5 thousand items/cm(2) in containers loaded with hot water with the following order: IPS>IPP>IPET>IPLA, while microwave treatment showed lower values ranging from 171.9 thousand items/cm(2) to 301.6 thousand items/cm(2). In vitro toxicity test using human intestinal epithelial Caco-2 cells indicated decrease of cell viability in raw leachate, resuspended MPs and supernatants, which might further lead to cell membrane rupture, ROS production, and decreased mitochondrial membrane potential. Moreover, the leachate inhibited the expression of key genes in the electron transport chain (ETC) process, disrupted energy metabolism. For the first time, we isolate the actually released microplastics and organic substances for in vitro toxicity testing, and demonstrate their potential impacts to human intestine.