Loess disaster chains on the Heifangtai Platform, China, cause frequent loess landslides and form landslide dams, thus obstructing rivers. In addition, the failure of landslide dams causes loess mudflows and other related disasters. In this study, the influences of different inflow rates on the failure process and triggering mechanisms of loess landslide dams were explored using five sets of model experiments. These experimental results revealed that the failure of loess landslide dams occurs through overtopping and piping failure, or overtopping failure. Overtopping and piping failure can be divided into infiltration, seepage channel development, break overflow, and rebalancing. When the inflow rate was 1.0 L/s, the water could not penetrate the dam in time. Overtopping failure primarily involves horizontal and downward erosion of the breach. The inflow rate was positively correlated with soil transport, peak flow velocity, and peak bulk density based on the experimental data. The bulk density of the failure mudflow was categorized into slow increase, transition, and attenuation stages based on our experimental results. In addition, by analyzing the volume and stability of residual dams, the likelihood and damage degree of secondary hazards after the dam failure were initially explored. This study provides a scientific basis for relevant studies on loess landslide dam failure.

The propagation of shallow-water waves may cause liquefaction of the seabed, thereby reducing its support capacity for pipelines and potentially leading to pipeline settlement or deformation. To ensure the stability of buried pipelines, it is crucial to consider the excess pore pressure induced by irregular waves thoroughly. This paper presents the findings of an experimental study on excess pore pressure caused by irregular waves on a sandy seabed. A series of two-dimensional wave flume experiments investigated the excess pore pressure generated by irregular waves. Based on the experimental results, this study examined the influences of irregular wave characteristics and pipeline proximity on excess pore pressure. Using test data, the signal analysis method was employed to categorize different modes of excess pore-water pressure growth into two types and explore the mechanism underlying pore pressure development under the influence of irregular waves.