High-Density Polyethylene (HDPE) PE is one of the primary contributors of long-lasting and prolonged pollution in the environment. In this study, more than three hundred marine isolates collected off the Gujarat Sea coast were tested for HDPE plastic utilizing ability. Among fifty-one positive noted isolates, RS124 as a potential strain was identified as Micrococcus flavus (accession is PP858228) based on 16 S rRNA gene sequencing and total cellular fatty acid profiling. Initial bacterial adherence on the film surface was shown in a scanning electron microscopy (SEM) image as a key step to biodegradation. Moreover, atomic force microscopy (AFM) shows that the film surface became more fragile, damaged, and rougher than untreated films. Shifts and alterations in peak transmittance with emergence of two new shouldered peak in degraded HDPE observed by fourier transform infrared spectroscopy (FTIR) was associated to chemical and mechanical alteration. Thermogravimetric analysis (TGA) analysis designated larger difference in percent weight loss provisions thermal instability. In the enzymatic study, the highest activity of peroxidase and dehydrogenase was recorded on the 3rd and 4th weeks of treatment with strain, respectively, during co-incubation. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis disclosed the presence of a distinct 19 kDa size protein, uncovering its role in the colonization of bacteria on the hydrophilic HDPE surfaces. About 1.8% weight reduction in HDPE was recorded as a result after 30 days of bio-treatment with M. flavus. Hence, the entire observed results reveal that the M. flavus RS124 could be effectively applied for the degradation of HDPE. This is the first report on M. flavus that it exhibits plastic degrading characteristic ever, which may allow for green scavenging of plastic waste.

The aim of the study was to assess the impact of plant extracts from hemp inflorescences (H10-10% and H20-20%), as well as a mixture of extracts from hemp inflorescences, sage, and tansy leaves (M10-10% and M20-20%) on phytotoxicity and selected physiological and biometric parameters of wheat seedlings, as well as the biological activity of soil in a growth chamber experiment. In all experimental combinations, a low phytotoxicity of the extracts was observed in the form of leaf tip yellowing, classified as first-degree damage or its complete absence. The plant extracts and their mixtures, except for the H20 extract, had an inhibitory effect on the development of fungal pathogens, especially Fusarium spp. The H20 extract increased the fresh and dry weight of root seedlings. The tested extracts also had a positive effect on the chlorophyll content in seedlings. The highest chlorophyll concentrations were recorded for the seedlings sprayed with the M20 extract mixture. The applied plant extracts influenced the activity of soil enzymes. The highest activity of catalase and dehydrogenases was observed after spraying seedlings with M20, while the lowest was recorded after applying H10. Of all the tested groups of soil environment compounds included in the Biolog EcoPlates test, carbohydrates and carboxylic acids were most actively utilized. Conversely, amines and amides constituted the group of compounds utilized the least frequently. The present study demonstrated the high effectiveness of plant extracts on wheat seedlings due to their biocidal action against phytopathogenic fungi and increased biological activity of the soil. This research serves as an initial phase of work, which will aim to verify the results obtained under field conditions, as well as assess the biological stability of the extracts.