The study of the damage effects resulting from the explosions of cylindrical charges holds significant importance in both military and civilian fields. In contrast to spherical charges, the explosive characteristics of the cylindrical charge exhibited spatial irregularities. To comprehensively quantify the influences of borehole diameter and buried depth on the damage effects, including the crater size and stress wave, experimental and numerical investigations on explosions induced by cylindrical charge are carried out in this paper. Firstly, a set of tests is conducted to provide fundamental data. Then, based on the meshfree method of Smoothed Particle Galerkin (SPG) and the K&C model, the variations in crater dimensions and the peak stress are fully simulated with a range of borehole diameters and buried depths. Finally, the influence of borehole and buried depth on the coupling factor is discussed. Both the buried depth and the borehole diameter impact the utilization of blast energy enormously. Furthermore, materials with distinct impedance values exert an influence on the distribution of the stress wave. Following the dimensional analysis, several empirical formulae expressing the crater size and peak stress are established, all of which can predict explosion damage rapidly and accurately.

This study investigates the microhardness and geometric degradation mechanisms of interfacial transition zones (ITZs) in recycled aggregate concrete (RAC) exposed to saline soil attack, focusing on the influence of supplementary cementitious materials (SCMs). Ten RAC mixtures incorporating fly ash (FA), granulated blast furnace slag (GBFS), silica fume (SF), and metakaolin (MK) at 10 %, 15 %, and 20 % replacement ratios were subjected to 180 dry-wet cycles in a 7.5 %MgSO4-7.5 %Na2SO4-5 %NaCl solution. Key results reveal that ITZ's microhardness and geometric degradation decreases with exposure depth but intensifies with prolonged dry-wet cycles. The FAGBFS synergistically enhances ITZ microhardness while minimizing geometric deterioration, with ITZ's width and porosity reduced to 67.6-69.0 mu m and 25.83 %, respectively. In contrast, FA-SF and FA-MK exacerbate microhardness degradation, increasing porosity and amplifying microcrack coalescence. FA-GBFS mitigates the diffusion-leaching of aggressive/original ions and suppresses the formation of corrosion products, thereby inhibiting the initiation and propagation of microcracks. In contrast, FA-SF and FA-MK promote the formation of ettringite/gypsum and crystallization bloedite/glauberite, which facilitates the formation of trunk-limb-twig cracks.

Seismic risk assessment of code-noncompliant reinforced concrete (RC) frames faces significant challenges due to structural heterogeneity and the complex interplay of site-specific hazard conditions. This study aims to introduce a novel framework that integrates three key concepts specifically targeting these challenges. Central to the methodology are fragility fuses, which employ a triplet of curves-lower bound, median, and upper bound-to rigorously quantify within-class variability in seismic performance, offering a more nuanced representation of code-noncompliant building behavior compared to conventional single-curve approaches. Complementing this, spectrum-consistent transformations dynamically adjust fragility curves to account for regional spectral shapes and soil categories, ensuring site-specific accuracy by reconciling hazard intensity with local geotechnical conditions. Further enhancing precision, the framework adopts a nonlinear hazard model that captures the curvature of hazard curves in log-log space, overcoming the oversimplifications of linear approximations and significantly improving risk estimates for rare, high-intensity events. Applied to four RC frame typologies (2-5 stories) with diverse geometries and material properties, the framework demonstrates a 15-40 % reduction in risk estimation errors through nonlinear hazard modeling, while spectrum-consistent adjustments show up to 30 % variability in exceedance probabilities across soil classes. Fragility fuses further highlight the impact of structural heterogeneity, with older, non-ductile frames exhibiting 25 % wider confidence intervals in performance. Finally, risk maps are presented for the four frame typologies, making use of non-linear hazard curves and spectrumconsistent fragility fuses accounting for both local effects and within-typology variability.

The incorporation of PCMs in energy piles holds significant potential for revolutionising thermal management in construction, making them a crucial component in the development of next-generation systems. The existing literature on PCM-integrated energy piles largely consists of isolated case studies and experimental investigations, often focusing on specific aspects without providing a comprehensive synthesis to guide future research or practical applications. To date, no review has been conducted to consolidate and evaluate the existing knowledge on PCMs in energy piles, making this review the first of its kind in this field. Up until now, this gap in research has limited our understanding of how PCM configurations, thermal properties, and integration methods impact the thermal and mechanical performance of these systems. Through thoroughly analysing the current research landscape, this review discovers key trends, methodologies, and insights. The methodology used here involved a systematic search of the existing SCI/SCIE-indexed literature to ensure a structured review. Based on the SLR findings, it is evident that current research on PCMs in energy piles is focused on improving thermal efficiency, heat transfer, and compressive strength. Furthermore, precise adjustments in melting temperature significantly impact efficiency, with PCM integration boosting thermal energy extraction by up to 70 % in some cases, such as heating cycles, and saving up to 30 % in operational costs. PCMs also reduce soil temperature fluctuations, improving structural integrity through minimising axial load forces. However, challenges remain, including reduced mechanical strength due to voids and weak bonding, high costs, and complexities such as micro-encapsulation. We acknowledge that there are gaps in addressing certain key factors, including thermal diffusivity; volume change during phase transitions; thermal response time; compatibility with construction materials; interaction with soil, creep, and fatigue; material compatibility and durability; and the long-term energy savings associated with PCM-GEP systems.

The large coal production and consumption has caused environmental problems worldwide as a source of energy production with irreparable effects on soil, water, and the ecosystem. In addition, producing coal waste in coal washing plants and burying it intensifies the issue in nature. Due to the rising generation of coal waste from various sources, this study utilized several forms of coal waste obtained from a coal-washing plant in the production of both structural concrete (with a water-cement ratio of 0.54) and non-structural concrete (with a water-cement ratio of 0.7). The impact of coal waste on compressive strength (CS) was examined at curing ages of 7, 28, and 56 days. Various percentages of coal waste were substituted for both cement and sand. A superplasticizer was incorporated into the concrete mixtures to enhance the workability and achieve the desired slump and strength levels. According to the compressive strength findings, the ideal replacement level of sand with jig coal waste was 30 %. For 56-day-old specimens, the optimal substitution rates for cement with jig coal waste powder, flotation coal waste, and coal waste ash were found to be 10 %, 10 %, and 20 %, respectively. Notably, adding 10 % coal waste powder and coal waste ash increased compressive strength by 22 %, 23 %, and 44 % at 56 days.

Alkali-activated concrete (AAC) is a focal point in green building material research due to its low carbon footprint and superior performance. This study seeks to enhance the impact resistance of recycled aggregate concrete (RAC) by elucidating the synergistic mechanisms of alkali activation, nano-modification, and fiber reinforcement. To this end, four mix designs, incorporating NaOH and NaOH-Na2SiO3 systems with 2 % nano-SiO2(NS), were developed and assessed through setting time, compressive strength, drop hammer impact tests, and XRD/ SEM analyses. The NaOH-Na2SiO3 system exhibited a 23.5 % increase in compressive strength over NaOH, achieving 28.41 MPa, while NS refined pore structures, elevating strength to 32.2 MPa; XRD/SEM analyses confirmed mechanisms of pore refinement and interfacial enhancement. In the optimized system, the NT12-C5 formulation, incorporating polypropylene fiber (PPF) and recycled carbon fiber (RCF), exhibited superior impact resistance, with NS enhancing interfacial bonding between carbon fiber and the matrix, resulting in a 47.8 % increase in initial crack impact energy. The Weibull model validated the reliability of impact performance. Furthermore, life cycle assessment revealed that Soil Solidification Rock Recycled aggregate concrete (SSRRAC) substantially reduced carbon emissions compared to ordinary Portland cement (OPC), while maintaining competitive economic costs. This study's innovations include: (1) synergistic optimization of low-carbon AAC performance using NaOH-Na2SiO3 and NS; (2) optimized PPF/RCF formulations promoting the reuse of waste carbon fiber; and (3) application of the Weibull model to overcome conventional statistical constraints. Collectively, these findings establish a theoretical and practical foundation for the global development of sustainable building materials.

On February 6, 2023, two devastating seismic events, the Kahramanmaras, earthquakes, struck the Eastern Anatolian Fault Line (EAF) at 9-h intervals. The first earthquake, with a moment magnitude (Mw) of 7.7, struck the Pazarc & imath;k district, followed by a second earthquake with a moment magnitude (Mw) of 7.6 in the Elbistan district, both within the Kahramanmaras, province. These dual earthquakes directly impacted eleven provinces in Eastern and Southeastern Anatolia leading to significant loss of life and extensive damage to property and infrastructure. This study focuses on revealing the main parameters causing to the collapse of reinforced concrete (RC) buildings by examining their compliance with legislation and earthquake codes in force at the time of construction. For this purpose, detailed examinations such as field observations, collection of general information and official documents about the buildings, determination of material properties and soil characteristics, and three-dimensional finite element (FE) analysis of 400 totally collapsed RC buildings in the Kahramanmaras,, Ad & imath;yaman, Hatay, and Gaziantep provinces, which were among the cities affected by the Kahramanmaras, earthquakes were performed. The findings of this study contribute to a better understanding of the seismic deficiencies of buildings in earthquake-prone regions and provide information on which strategies to develop to increase the resilience of buildings with similar characteristics in other earthquake regions against future seismic events. Considering that the time from the beginning of the construction of the building until its completion consists of several stages, it can be seen that 43.58 % of the errors that cause damage and collapse of the buildings in this study are made in the construction stage, 25.57 % in the FE analysis stage, 24.77 % in the license stage, and 6.07 % in the after construction stage. Thanks to the development process of earthquake codes, regulations in building inspection practices and easier access to quality materials have greatly reduced the damage and collapse of buildings constructed in recent years.

To study the failure mechanism of high ductile coagulation (HDC) under sulfate attack in cold saline soil area, cement-based cementing material (cement: fly ash: sand: water reducing agent: water = 1:1:0.72:0.03:0.58) and 2 % polyvinyl alcohol fiber (PVA) were used to prepare HDC sample, to increase the density and ductility of concrete. a 540-day sulfate-long-term immersion test was performed on HDC specimens under two low-temperature curing environments and different sulfate solution concentrations (5 %, 10 %). Using a combination of macro and microscopic methods, according to the principle of energy dissipation, To study the relationship between the evolution of energy (total damage energy U, dissipated energy Uds, elastic strain energy Ues) and the deterioration of strength and the change of pore structure during the compression process of HDC. According to the characteristics of stress-strain curves during HDC compression, the damage evolution characteristics of characteristic stress points during HDC compression are summarized, establish energy storage indicators Kel to evaluate the degree of internal damage of HDC. The results show that during the compression damage process of HDC after long-term soaking in sulfate solution under low temperature environment, Uds and Ues of HDC at characteristic stress points both increase first and then decrease, Kel are reduced first and then increased. The development trend of elastic strain energy and dissipative energy of HDC in 10 % sulfate solution is more drastic than that in 5 % sulfate solution. Compared with the other three groups, the D group energy storage level rises and falls more violently, and the HDC has a smaller ability to resist damage under this condition. Through the study of the correlation between macro and micro changes of HDC in cold saline soil areas and energy evolution, to provide a reference for the stable operation of highly ductile concrete in cold saline soil areas.

In this study, impact compression tests on low-temperature concrete were conducted using a split Hopkinson pressure bar. The impacts of low temperatures on the strength, fractal, and energy characteristics of concrete were analyzed. The damage evolution mechanism of the microcrack density was discussed based on microscopic damage theory and microscopic tests. The results demonstrated that the impact fractal dimension and energy dissipation density of low-temperature concrete were positively correlated with the strain rate. The strain rate sensitivity of the impact fractal dimension was significantly affected by low temperature at low strain rates; however, low temperature had little effect at high strain rates. The pore water transformed into ice at negative temperatures, the fracture energy of the concrete increased, and the energy dissipation density increased. More than 50 % of the capillary and free water inside the concrete was frozen at -10 degrees C; approximately 30 % of the capillary and free water and 65 % of bound water did not freeze when the temperature was -30 degrees C. The macropores did not collapse under the action of ice filling at high strain rates; however, microcracks were generated around them. With a decreasing temperature, the threshold stress for microcrack propagation increased, crack propagation required more energy, and the microcrack density decreased.

Geopolymer concrete is a promising alternative to traditional cement due to its lower carbon footprint and enhanced mechanical properties. While carbonatogenic bacteria have been widely studied in Portland cement, their role in geopolymers remains underexplored, particularly in noncalcium precipitation mechanisms. This study screened limestone quarry samples using 16S amplicon sequencing to identify potential carbonatogenic bacteria. Following isolation and precipitation analysis, Lysinibacillus fusiformis JH2 was selected and incorporated into fly ash-bottom ash-based geopolymer paste. XRD and SEM analysis revealed that microbial carbonation led to the formation of aragonite, natrite, and brucite, refining pore structures, enhancing durability, and increasing compressive strength. Incorporating JH2 endospores significantly improved early strength, achieving 17.5 MPa within 7 days, meeting Indonesian structural standards, and increasing strength by up to 166 %. Notably, bacteria remained viable and retained their ability to form endospores, opening possibilities for endospore storage in artificial aggregates for selfhealing and bio-enhanced construction materials. These findings also show a potentially novel microbial pathway for non-calcium precipitation, contributing to the faster, more sustainable enhancement of geopolymer concrete for industrial applications.