Seismic safety of high concrete face rockfill dams (CFRD) on thick layered deposit is crucial. This study develops a seismic performance assessment procedure for high CFRD on thick layered deposit considering multiple engineering demand parameters (EDPs), and evaluates the effectiveness of gravel column and berm reinforcement for a typical CFRD. Solid-fluid coupled seismic response analysis of high CFRD on thick layered deposit is conducted using an advanced elasto-plastic constitutive model for soil, revealing the unique seismic response of the system, including the buildup of excess pore pressure within the thick deposit. Based on the high-fidelity simulations, appropriate intensity measure (IM) and EDPs are identified, and corresponding damage states (DS) are determined. Fragility curves are then developed using multiple stripe analysis, so that the probability of damage under different input motion intensities can be quantified for different DS. Using the proposed procedure, the reinforcement effects of berms and gravel columns are evaluated. Results show that berms can contribute significantly to reducing the probability of damage for the system, while the effect of gravel columns is unsatisfactory due to the limited achievable installation depth compared to the thickness of the deposit and low replacement ratio.

Deformation predictions in high Concrete Face Rockfill Dams tend to underestimate observed settlements due to scale effect and breakage phenomena that cannot be adequately captured by laboratory tests. This paper presents a Visco-Elasto-Perfectly Plastic (VEPP) model for predicting deformations in high Concrete Face Rockfill Dams (CFRDs) that addresses these challenges incorporating explicitly key rockfill parameters like grain size and post-compaction porosity, which influence both the non-linear elastic and plastic behaviors of rockfill. The VEPP model enables deformation prediction while using standard laboratory test results. The model's effectiveness was demonstrated through its application to the 233 m high Shuibuya Dam, the tallest CFRD in the world. The VEPP model predictions closely align with observed deformations throughout the dam's construction, impoundment, and early operational stages. By using physically meaningful parameters, the model reduces the uncertainty associated with the empirical assessment of model parameters using back-analysis from similar projects. While the VEPP model offers improved predictive accuracy, particularly during early design phases, further advancements could be achieved by refining the creep formulation and accounting for grain size evolution during construction. This approach has the potential to optimize the design and construction of future high CFRD.