A vertical tube surface drip irrigation system was designed to address the damage caused by soil drought and high surface temperature to sand-fixing seedlings in a plant sand-fixation area. Numerical simulation and experimental verification were used to study soil water movement with vertical tube infiltration and surface drip irrigation for four aeolian sandy soils with different hydraulic conductivity (Ks), drip discharge (Q), vertical tube diameter (D), and vertical tube buried depth (B). The results show that a power function relationship exists between the soil-stable infiltration rate (if) and Ks, D, and B given the condition of vertical tube water accumulated infiltration, and its coefficient is 0.17. The power function indices of Ks, D, and B are 0.87, 1.89, and -0.37, respectively. The if can be used to determine the maximum drip discharge (Qmax) of the dripper in the vertical tube to ensure that the sand-fixing plants are not submerged during drip irrigation through the vertical tube (Qmax=if). The wetting front transport distance in the three directions increased with increasing Ks and Q but decreased with increasing D and B. After determining the time required for water to reach the bottom of the vertical tube, an estimation model of soil wetting body transport for vertical tube surface drip irrigation, including Ks, Q, D, and B, was constructed. Compared with the experimental data, the root mean square error (RMSE) is between 0.17 and 0.42 cm, and the Nash-Sutcliffe efficiency (NSE) is at least 0.88. Therefore, the model is appropriate and can provide valuable practical tools for the design of vertical tube surface drip irrigation in different plant sand fixation areas. A surface drip irrigation system and pipe protection technology were combined to form a vertical tube surface drip irrigation system to address the damage caused by soil drought and high surface temperature to sand-fixing seedlings. However, this irrigation technology has the problem that it is difficult to quantify the matching of drip discharge and pipe parameters (vertical tube diameter and burial depth), wetted soil volume, and plant roots due to the single soil sample used in the laboratory experiments. This paper considers the influence of soil differences in diverse plant sand-fixing areas and establishes a stable infiltration rate model to determine the maximum drip discharge. Additionally, a soil wetted volume prediction model was developed by combining HYDRUS-2D simulations and experimental verification. The model is simple and has high prediction accuracy, which is convenient for designers to determine the appropriate vertical tube parameters for different plant sand-fixation areas.

Saffron ( Crocus sativus : Iridaceae) is a fall-blooming perennial plant and its dried stigma is the priciest spice and a key non-oil export for Iran's economy. The bulb mite, Rhizoglyphus robini , is a polyandrous and multivoltine species and its damage to saffron corms directly and indirectly causes lower yields of saffron crops. Environmental conditions and abiotic factors, such as temperature, humidity, density, and diet affect the morphological traits of living organisms and subsequently affect biological abilities. In this study, changes in temperature, soil moisture, density (nymphs + adults), time, and corm weight on the morphological traits of the saffron bulb mite, including body length and width, and leg sizes of adult females were investigated in a saffron field in the Dargaz County of Iran during 2022. The results of variance analysis of the morphometrical parameters of the mite species, including body length, body width, and four pairs of legs in different months were significant. Based on simple and multiple linear regression models as well as non-linear regression, the effect of temperature and density (nymphs + adults) was reversed and the effect of soil moisture and corm weight was direct on morphometrical parameters of this species. Based on our results, soil moisture has a strong relation with female body size traits (body length, width, and leg lengths). This indicates that irrigation cycle management might be an important factor in bulb mite management in saffron agroecosystems.