This study addresses the cracking issue of airport foundations in marine and coastal regions by proposing an unsaturated reinforcement method based on Microbially Induced Calcium Carbonate Precipitation (MICP) combined with coconut fibers. Composite sand columns incorporating coconut fiber and bioslurry were prepared, and the effects of fiber length and content on the mechanical properties of MICP-treated sand columns were investigated. Experimental results revealed that the addition of short fibers (1-5 mm) significantly improved the unconfined compressive strength and ductility of the MICP-treated sand columns. As the bioslurry content decreases in the sand columns, the enhancement effect of short fibers on the unconfined compressive strength becomes more pronounced, with fiber addition improving compressive strength by up to 98 %. However, the inclusion of medium fibers (5-10 mm) and long fibers (10-15 mm) negatively affected the mechanical properties of the sand columns. Microstructural analysis further confirmed the synergistic reinforcement effect of short fibers and calcium carbonate precipitation. Short fibers acted as bridges, forming additional contact points between sand particles, which facilitated calcium carbonate precipitation at critical contact points, thereby enhancing the overall stability and strength of the sand columns. This characteristic was more pronounced under unsaturated conditions. This study provides a feasible technical solution for the effective reinforcement of airport foundations and demonstrates potential in unsaturated reinforcement and improving the ductility of sandy soil foundations.

Microbially induced carbonate precipitation (MICP) utilizing a urease active bioslurry is an ecofriendly method that can improve soil strength. However, the micromechanisms, such as ion diffusion, production rate of CaCO3, porosity, and permeability of pile reinforced by bioslurry, require further investigation. In this study, both biopile model tests and a coupled fluid-flow, solute transport and biochemical reactive model were conducted to analyze the mechanical property and biocementation mechanism of pile formed by urease active bioslurry. Results showed that the simulated CaCO3 content along the biopile length after 120 h grouting was close to test results. The UCS of the biopile decreased from 3.44 MPa to 0.88 MPa and the CaCO3 content decreased from 13.5% to 9.1% with increasing depth. The largest reduction in CaCO3 content was observed in the middle part of the biopile as the CaCO3 crystals in the upper part hindered the downward transport of the cementation solution. The morphology of CaCO3 crystals was influenced by cementation solution concentration, as evidenced by the predominance of spherical vaterite crystals in the upper part of the biopile and rhomboidal calcite crystals in the middle and lower parts. During the grouting process, the concentration of calcium ions and urea decreased, while the ammonium ion levels increased with depth due to the utilization of calcium ions and urea for CaCO3 precipitation and ammonium ion production. The production rate of CaCO3 first increased rapidly to reach a peak value and then decreased. The porosity and permeability demonstrated both linear and nonlinear decreasing trends as the CaCO3 concentration increased. The largest reduction in porosity and permeability, reaching 20% and 58% in the biopile top.