Biodegradable mulch film is considered a promising alternative to traditional plastic mulch film. However, biodegradable mulch film-derived microplastics (BMPs) in the environment have been reported as carriers for herbicides. Particularly in agricultural settings, limited attention has been given to the abiotic and biological aging processes of BMPs, as well as the herbicides adsorption mechanisms and associated health risks of BMPs. This study investigated the adsorption behaviors and mechanisms of mesotrione on both virgin and aged polylactic acid (PLA)/poly (butylene adipate-co-terephthalate) (PBAT) BMPs, and further evaluated their bioaccessibilities in gastrointestinal fluids. A variety of physical and chemical methods, including scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), revealed increased roughness, generation of oxygen-containing functional groups, and higher O/C ratios of PLA/ PBAT BMPs after ultraviolet (UV) and microbial aging processes. Both UV aging and microbial aging significantly enhanced the adsorption levels of mesotrione on PLA and PBAT BMPs by approximately two-fold, driven by pore filling, hydrogen bonding, and it-it conjugation. The adsorption capacity of mesotrione on BMPs decreased with the pH from 3.0 to 11.0, which was involved by electrostatic interactions. In addition, salt ionic strength (Na+, Ca2+, Mg2+, Fe3+) generally inhibited the adsorption due to ions competition for adsorption sites. Notably, mesotrione exhibited high bioaccessibility when adsorbed onto BMPs, with aged BMPs exhibiting greater desorption quantities in gastrointestinal fluids compared to virgin BMPs. These findings provide effective insights into the potential health threats posed by BMPs carrying herbicides in the environment and offer applicable guidance for managing and remediating composite pollution involving BMPs and adsorbed contaminants.

The generation of polyethylene mulch film (PEMF) has promoted the rapid development of agriculture, while the non-degradability of it has caused the serious damage for the ecological environment. Currently, the biodegradable mulch film is considered as the most promising green substitutes for petroleum-based PEMF, owing to its environmental friendliness and biodegradability. Hence, this study fabricated a biodegradable mulch film (PSGA) through the crosslink (the esterification/amidation reactions and hydrogen bonds) between polylactic acid waste liquid (PLAWL) and sodium alginate (SA)/gum arabic (GA). Then attapulgite (ATP) was added to improve the mechanical properties. Therein, PLAWL was a kind of waste liquid from the fabrication process of polylactic acid (PLA) based on straw. At the same time, PSGA had similar insulation and water retention performance to PEMF and great UV resistance, thermal stability, and hydrophilicity surface. Additionally, pot experiment showed that PSGA could significantly promote the growth of Chinese white cabbage and the degradability ratio of that could reach 50% in a month. The total amounts of Rhizobiaceae (Ensifer and Allorhizobium-Neorhizobium-Pararhizobium, fixing free nitrogen gas and providing nitrogen nutrients for plants) in soil with PSGA was 12%, which was obviously higher than that in blank (4.5%). Therefore, this study provides a high-value recycling route for industrial waste liquid, offering an alternative solution to PEMF.

Microplastic contamination of low-density polyethylene mulch and nutrient loss from fertilizers present significant challenges in the crop-growing. In this study, the focus was on creating a biodegradable film that combines the advantages of plastic film, thermal insulation and water retention, as well as the controlled release of fertilizer. A key innovation was the efficient introduction of low molecular weight and low dispersibility of poplar lignin into chitosan and polyvinyl alcohol matrices. The lignin was extracted using deep eutectic solvents of binary carboxylic acids (choline chloride and maleic acid). The refined lignin was used as a superhydrophobic additive to improve the mechanical properties, hydrophobicity, and controlled nutrient release properties of the films through cross-linking. The mulch attained a tensile strength of 37.6 MPa, an elongation of 644.1 %, and a precise release of 53.1 % urea over 30 d at the ideal lignin content ratio (10 %). Furthermore, the film proficiently regulated soil temperature and moisture content. Successful enhancement of cabbage growth was achieved by actual measurements. This discovery provides innovative ideas for the development of nutrient slow- release high-strength integrated agricultural mulching films to promote sustainable, high-quality green agriculture.

Carbendazim (CBZ) is a highly effective benzimidazole fungicide; however, its excessive use poses significant risks to the environment and nontarget organisms. To mitigate this issue, in this study, we developed environmentally friendly antifungal mulch films that exhibited controlled CBZ release. The films were prepared using a tape-casting technique, incorporating 21.32 % CBZ-loaded halloysite nanotubes, ultramicrocrushed sorghum straw powder, corn starch, polyvinyl alcohol, and glycerol. This unique combination not only enhanced the environmental compatibility of the films but also leveraged the synergistic properties of the components. The resulting mulch films had excellent mechanical properties (maximum tensile load of 28.9 N) and barrier performance (water vapor transmission rate of 253.22 g/(m2 & sdot;d)), fully complying with the Chinese standard for biodegradable agricultural mulch films (GB/T 35795-2017). Additionally, the films demonstrated remarkable antifungal efficacy and controlled-release behavior, following a first-order release model with a cumulative release rate of 81.43 % CBZ over 18 d. The novelty of this study lies in the integration of CBZ-loaded halloysite nanotubes with a biodegradable matrix to develop multifunctional mulch films that combine antifungal performance, environmental protection, and agricultural sustainability. The controlled release of CBZ reduces its loss and excess release in soil, addressing pollution concerns and minimizing environmental risks. Thus, this study provides insight into the design of advanced agricultural materials that align with global sustainable development goals.

Extensively used plastic mulch film causes tremendous environmental pollution. Developing biodegradable mulch film represents an emerging demand for future agriculture. Bone gelatin (BG) has emerged as promising candidates in the field of biodegradable agricultural mulch film due to its eco-friendly and biodegradable attributes, yet the terrible mechanical properties and hydrophobicity are great challenges. Here, aminodimethylsiloxane/POSS polymer/bone gelatin (PDMS-NH2/PAH/BG) mulch film was prepared by incorporated POSS-allyl glycidyl ether hydroxyethyl acrylate polymer (PAH polymer) and aminodimethylsiloxane (PDMSNH2) into the BG. The effect of PDMS-NH2 dosages on performances of PDMS-NH2/PAH/BG mulch film was explored. When the PDMS-NH2 dosage was 4 %, the mulch film had a water contact angle (WCA) of 128 +/- 1 degrees, tensile strength (TS) of 5.93 +/- 0.81 MPa, and elongation at break (EAB) of 361.38 +/- 25.04 %. After being buried in the soil for 60 days, the degradation rate of mulch film reached 78 %. Additionally, it also had favourable light transmission, water vapor barrier and moisture retention and insulation performance. Pot experiment showed that the wheat seeds germination rate covered mulch film was 98 % and it could promote the growth of seedlings. The results indicated that PDMS-NH2/PAH/BG mulch film could serve as a biodegradable mulch film to boost crop yields, inspiring advancements in green ecological agriculture.

In this paper, carboxymethyl cellulose (CMC) and hemicellulose derived from water hyacinth were used to prepare hemicellulose-based biodegradable mulch film by covalent cross-linking and ionic cross-linking in order to expand its application in agricultural production practice. The esterification reaction between hemicellulose, CMC and citric acid resulted in an increase in tensile strength and elongation at break of the membranes. When citric acid was not used as cross-linking agent and the pH was lowered, the sodium carboxylate group was protonated into carboxylic acid group, which provided abundant active sites for chemical cross-linking of hydroxyl group on hemicellulose and hydroxyl group on CMC. Furthermore Zn2+ could cross-link with carboxylic acid group through hydrogen bonding, and when the DS of carboxymethyl group was high, the cross-linking of Zn2+ with Zn2+ was higher, and the conversion into nano ZnO was lower, which was conducive to the uniform distribution and reduction of agglomeration phenomenon in the films. It is favorable for its uniform distribution in the film and reduces the agglomeration phenomenon. The mulch films made from water hyacinth has excellent mechanical properties, light transmittance, water absorption, soil moisture retention and heat preservation, and is biodegradable. This study will provide new ideas for water pollution control and farmland pollution for sustainable agricultural production.

The research on biodegradable mulches continues to receive widespread attention due to the concern about environmental issues, the protection of arable land for long-term development, and the proper disposal of residual films after the growth cycle. Biodegradable mulch films (BDM) exhibit excellent performance and offer significant environmental and agricultural benefits, addressing the limitations of traditional plastic films. BDM possesses advantages comparable to polyethylene (PE) films. They are rich in sources, exhibit excellent biocompatibility, and facilitate in- situ biodegradation, with the degradation products being absorbed by plants for growth and development while enhancing soil fertility. This paper provides a review of the latest developments in the preparation of BDM using plant-based/animal-based raw materials. It analyses the production processes and performance of these products, discusses methods for enhancing the strength and toughness of films; explores the feasibility and sustainable development of BDM from an environmental and agricultural benefits perspective, and offers a sustainable solution for agricultural development.