Bats are indispensable members of the natural world, supporting its delicate balance. Bats have vital roles in controlling insect populations and enhancing soil fertility. They also help in the harvesting and dispersal of seeds, pollination in plants, and nutrient recycling and distribution. However, through evolution over millions of years, they have also adapted their immune system so that they may carry numerous types of pathogens, the majority of which are viruses, without these pathogens having any serious ill effects on bats themselves. Their anatomical adaptation to flight and the reduced immune response to DNA damage during flight have also contributed to bats becoming reservoirs of deadly pathogenic diseases. This review discusses the different adaptations of bats with a special focus on the immune system that have helped them evolve as a reservoir for various viruses. The study also enumerates how the increase in global warming, the consequent changes in climatic conditions, habitat destruction, and bushmeat consumption increase the chances of an outbreak of novel zoonotic disease when humans come in contact with bats.

Tetracycline (TC) is effectively used antibiotic in animal husbandry and healthcare, has damaged soil ecosystems due to its misuse and residues in the soil environment. Therefore, the main objective of this study was to abate TC in hyphosphere soil by inoculating soil with arbuscular mycorrhizal fungi (AMF) and to explore its potential mechanisms. The results showed that under TC stress, inoculation with AMF reduced the contents of soil organic carbon and total nitrogen, and increased the activities of beta-glucosidase and urease in hyphosphere soil. The relative abundance of bacterial genera such as Pseudomaricurvus in the hyphosphere soil increased significantly after AMF inoculation. In addition, four bacterial genera, Cellulosimicrobium, Roseibium, Citromicrobium, and Hephaestia, were uniquely present in AMF-inoculated soil, and the functional genes Unigene456231 and Unigene565663 were significantly enriched in the hyphosphere soil. This suggests that the reshaping of the bacterial community and the enrichment of functional genes in the hyphosphere soil led to changes in the bacterial community's functions, which promoted the gradual abatement of residual TC in the soil. It should be noted that this study was solely based on a single pot experiment, and its conclusions may have certain limitations in broader ecological application scenarios. Subsequent studies will further investigate the remediation effects under different environmental factors and field trials. This study provides new insights into the use of AMF as a biological agent for the remediation of TC-contaminated soils, offering new perspectives for promoting sustainable agricultural development.

Tobacco is one of China's key economic crops, known for its wide distribution, high yield, and renewability. Tobacco stalk fibers (TSFs) share a similar chemical composition to wood fibers, making them a potential reinforcement for plant fiber composites. However, the waste tobacco stalk fibers raw material utilization rate is very low, and wasteful phenomenon is very serious. In this study, we prepared biodegradable TSF/PBAT composites using waste tobacco stalk fibers and polybutylene adipate-co-terephthalate (PBAT) through melt blending and injection molding techniques. The effects of different modifiers on the performance of the composites were systematically investigated, with a particular focus on their influence on the degradation behavior. The results showed that the waste tobacco straw fiber can be used as a reinforcing fiber for PBAT. The addition of modifiers significantly improved the mechanical properties of the composites and effectively slowed down the degradation rate in the soil environment. Among the modifiers, the combined use of maleic anhydride (MA) and hydroxylated multi-walled carbon nanotubes (OM) produced the best results, with the tensile strength and flexural strength of the composite reaching 17.3 MPa and 28.0 MPa, respectively-representing increases of 74.7% and 57.3% compared to the untreated composite. After 16 weeks of soil degradation, the mass loss rate of the MA/OM-modified composite decreased from 10.50 to 6.34%. This study provides a comprehensive exploration of the entire lifecycle of TSF-reinforced PBAT composites and offers important theoretical support for the resource utilization and value-added application of waste tobacco stalks in the field of green composite materials.

This study presents a novel approach to address the current issue of plastic waste in the biosphere, which poses ecological hazards and threatens living beings. Herein, a set of biodegradable composites has been developed through the melt blending of polybutylene adipate-co-terephthalate (PBAT) and rice husk (RH), aiming to discover effective surface modification techniques for enhancing mechanical properties while maintaining biodegradability above 90%. This research studied the diverse surface treatment methodologies applied to raw RH, including alkaline, acetylation, and silane treatments. The novelty of this study lies in its focus on evaluating how these treatments distinctly influence the mechanical properties and biodegradability of RH. Additionally, it seeks to understand the underlying mechanisms driving these performance changes. To further improve the compatibility between hydrophobic PBAT and hydrophilic RH, a compatibilizer such as maleic anhydride (MAH) was added. A range of analytical techniques, including scanning electron microscopy (SEM), tensile testing, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), contact angle measurement, and soil burial test, was employed to investigate the biodegradability of the composites. The results indicate that the PBAT/Silane RH/MAH composite exhibited exceptional mechanical properties, with a tensile strength of 22.49 MPa, a strain at break of 41.83%, and Young's modulus of 187.60 MPa. Furthermore, the composites developed exhibited 90% mass loss during a six-month soil burial test, confirming their remarkable biodegradability. The findings present an innovative and practical solution for utilizing RH waste in a wide range of applications, particularly in the production of molded products such as straws.

Sustainability serves as a predominant obstacle for advanced energy storage. Herein, we proposed biomass-based separator materials, with favorable flame retardancy, cost-effectiveness, potential sustainability, and excellent electrochemical performance. Specifically, the engineered hydroxyapatite (HAP) molecule incorporates solvent-friendly groups to establish enhanced ion transport channels. The resulting CF@HAP separator induces an orderly decomposition of the electrolyte, which could optimize the electrode/electrolyte interface layer and prevent dendrite growth, making the durable cycling process, let alone its great mechanical properties and potential versatility. The in-depth study clarifies its complicated interfacial chemistry, flame retardancy, and thermal control mechanisms, thus achieving a thermally closed pore behavior during the temperature regulation process. Furthermore, the CF@HAP separator achieves complete degradation in the soil naturally within 30 days. As-designed biomass-based separators could comprehensively improve electrochemical performance toward higher levels of reactivity, stability, and postlife self-degradability, further underscoring the promising prospects for sustainable energy storage systems.

The advancement of green energy batteries as alternative energy sources is crucial for addressing the issues posed by hazardous chemicals and their disposal, thereby mitigating environmental damage caused by direct or indirect impacts of pollution. Recently, novel Earth Battery Systems (EBS) have been investigated, utilizing various types of soils, compost, and electrodes, with water as a fixed electrolyte. In this study, EBS are characterized using multiple techniques, including Linear Sweep Voltammetry (LSV) and Electrochemical Impedance Spectroscopy (EIS). Our findings reveal that, compared to soil-based earth batteries - which exhibit high impedance values, the open-circuit voltage (Voc) and short-circuit current (Isc) are significantly enhanced in vermi-compost-based earth batteries fabricated using steel-201 as the anode and graphite as the cathode. Furthermore, the critical role of organic matter in promoting ion transport and enhancing the system's overall efficiency is demonstrated through Cyclic Voltammetry (CV) and Ionic conductivity analysis. To ensure the sustainability of electrodes within the earth battery, corrosion studies are conducted using Tafel analysis. The results indicate that electrode corrosion can be effectively controlled by the strategic selection of corrosion inhibitors. Thus, this work lays the foundation for developing efficient, durable, and environmentally friendly EBS systems using soil and compost.

Soil erosion poses a considerable threat to ecosystem services around the world. Among these, it is extremely problematic for archaeological sites, particularly in arable landscapes where accelerated soil degradation has been widely observed. Conversely, some archaeological deposits may obtain a certain level of protection when they are covered by eroded material, thereby lessening the impacts of phenomena such as plow damage or bioturbation. As a result, detailed knowledge of the extent of colluvial deposition is of great value to site management and the development of appropriate methodological strategies. This is particularly true of battlefield sites, where the integrity of artifacts in the topsoil is of great importance and conventional metal detection (with its shallow depth of exploration) is relied upon as the primary method of investigation. Using the Napoleonic battlefield of Waterloo in Belgium as a case study, this paper explores how different noninvasive datasets can be combined with ancillary data and a limited sampling scheme to map colluvial deposits in high resolution and at a large scale. Combining remote sensing, geophysical, and invasive sampling datasets that target related phenomena across spatial scales allows for overcoming some of their respective limitations and derives a better understanding of the extent of colluvial deposition.

Cucumbers, cultivated globally on 3.7 million hectares, face yield losses due to salinity, highlighting the need for effective mitigation strategies for degraded soils. Melatonin (MT) has gained significant interest for its ability to relieve plant stress. To explore the regulatory role of exogenous MT in maintaining redox homeostasis in cucumber seedlings under saline-alkali stress (SA), this study employed the cucumber cultivar 'Xinchun No. 4 '. Simulated saline-alkali conditions were applied, and the effects of exogenous MT on seedling growth, reactive oxygen species (ROS) production, the ascorbate-glutathione (AsA-GSH) cycle, and changes in leaf anatomy were systematically assessed. The findings reveal that exposure to 40 mmol center dot L-1 saline-alkali stress significantly impaired cucumber seedling growth, reduced biomass, and led to excessive accumulation of hydrogen peroxide (H2O2) and superoxide anions (O2 center dot ) in the leaves. This, resulted in increased lipid peroxidation (indicated by elevated malondialdehyde (MDA) levels), whichi further compromised the cell membrane. Application of 10 mu mol center dot L-1 MT effectively reduced ROS levels, lowered MDA content, and mitigated electrolyte leakage. MT also enhanced AsA and GSH levels, improved AsA/DHA and GSH/GSSG ratios, and upregulated key AsA-GSH cycle genes (CsAPX, CsAAO, CsMDAR, CsDHAR, CsGR), leading to a significant increase in enzymatic activity. In addition, MT alleviated stress-induced stomatal closure, thereby restoring normal stomatal function. These findings suggest that MT enhances saline-alkali tolerance by mitigating oxidative damage, promoting antioxidant defenses, and effectively preserving stomatal function. Thus, our study points to a sustainable strategy to improve crop resilience in salinized environments via MT application.

This study explores the valorisation of alum sludge, a byproduct of water treatment processes, as a sustainable reinforcement material in Poly(butylene adipate-co-terephthalate) (PBAT) composites. The research aims to address industrial waste challenges by developing eco-friendly composite materials while promoting circular economy principles. Alum sludge particles, classified into two size distributions (<63 m and <250 m), were incorporated into PBAT matrices at varying concentrations. The composites were characterised for their mechanical, thermal, crystallographic, and moisture adsorption properties; and their biodegradation behaviour was evaluated through soil burial tests over 60 days. The results revealed that the 63 mu m particle size fraction exhibited superior performance compared to the 250 mu m fraction, demonstrating improved mechanical properties, reduced degradation rates, and enhanced interfacial bonding. Composites with 5 wt.% alum sludge achieved a balance between reinforcement and processability, outperforming the other filler concentrations examined. This innovative approach highlights the potential of upcycling alum sludge into functional materials, advancing sustainable waste management and composite manufacturing. Furthermore, the observed variation in degradation rates suggests that these composites can be tailored for applications requiring controlled compostability.

Polyhydroxybutyrate (PHB) has gained attention as an excellent packaging material due to its high crystallinity, biodegradability, low interaction with food matrices, and favorable mechanical properties. This study explores the development of PHB films incorporated with potassium sorbate (KS) and gallic acid (GA) via solvent casting, followed by a 30-day biodegradation test in soil. The films are analyzed for physicochemical and microbiological properties using X-ray diffraction, tensile testing, and disk diffusion assays. The soil-buried PHB films demonstrate accelerated biodegradation, likely driven by increased microbial and fungal activity, as well as moisture absorption. Incorporating KS and GA significantly enhances the antimicrobial efficacy of the films against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, with greater inhibition observed against S. aureus. This difference may stem from the additional lipopolysaccharide membrane in E. coli. Field emission scanning electron microscopy (FESEM) of the films, both pre- and post-biodegradation, provides further insights into their structural changes. These findings underscore the potential of PHB antimicrobial films in advancing sustainable food packaging applications.