Coral sand is characterized by low cohesion and high porosity, posing a potential liquefaction risk. Thus, coral sand stabilization is necessary in coastal construction projects. Polyurethane, with its excellent toughness, rapid reaction speed, and strong adhesive properties, is an ideal choice for reinforcing coral sand. However, the diffusion range of non-water reacting foamed polyurethane in coral sand is limited. This study explored the use of water-reacting polyurethane (PRP) to solidify coral sand. PRP is known for its high permeability and bonding strength. Despite its potential, the dynamic mechanical properties and reinforcing mechanism of PRP-solidified coral sand, which are crucial for site seismic analysis and seismic design, have not yet been fully understood. Thus, the resonance column and uniaxial compression tests were conducted to investigate the variations in dynamic shear strain, dynamic shear modulus, damping ratio, and uniaxial compressive strength of the solidified material under different confining pressures, PRP incorporation ratios, and mass moisture contents of coral sand. To further investigate the underlying mechanisms of the variations in its mechanical properties, scanning electron microscopy (SEM) and mercury intrusion tests were conducted to analyze the morphology and pore characteristics of the PRP-solidified material. The results show that, at a constant moisture content, increasing the PRP proportion enhanced the dynamic shear modulus, damping ratio, and uniaxial compressive strength of the coral sand. However, excess moisture content reduced these properties. The pore ratio decreased with the increase of PRP and moisture content, with a larger reduction before drying and a smaller one after drying. The tortuosity of the specimens was mainly affected by the incorporation ratio of PRP, which increased with the increase of the incorporation ratio. However, the moisture content of coral sand had a fewer effect on the tortuosity. The permeability gradually decreased with the increase of the PRP incorporation ratio and the moisture content of coral sand. PRP strengthened the coral sand, primarily through its covering, filling, and bonding effects, enhancing the friction and mechanical occlusion. These findings are significant for the applications of PRP in future coastal engineering projects.

来源平台：CONSTRUCTION AND BUILDING MATERIALS